FAX: (541) 258-6968
 
101 Items
Showing 1 thru 100
Firewall Panels
Chevrolet Parts -  1955-57 CAR/1955-59 TRK WIRE GROMMET - 3/4" HOLE
TR-73
USD $2.25 EA
CHEVROLET 1955-57 CAR/1955-59 TRK WIRE GROMMET - 3/4" HOLE
All passenger models.

For 1955 1956 1957 Chevrolet Cars and Trucks


Chevrolet Parts -  1929-1932 ELECTROLOCK CABLE GROMMET
GR-186
USD $5.95 EA
USD $4.95 EA ON SALE
CHEVROLET 1929-1932 ELECTROLOCK CABLE GROMMET
This is the Electrolock Ignition Cable Firewall Grommet for all 1929-1932 Chevrolet cars & trucks. Grommet fits 1-11/16" hole in firewall for the ignition cable. Dimensions: 1-13/16" OD x 9/16" ID for 1-11/16" hole. Center hole is molded at an angle as original. Replaces GM# 356344

For 1929 1930 1931 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-55 FIREWALL TO FENDER FILLER PLATES 1/2 - 1TON
SA-346
USD $12.95 SET
CHEVROLET 1947-55 FIREWALL TO FENDER FILLER PLATES 1/2 - 1TON
In 1955, fits 1st series only.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1947-55 FIREWALL TO FENDER FILLER PLATES 1 1/2 - 2TON
SA-347
USD $13.50 PR
CHEVROLET 1947-55 FIREWALL TO FENDER FILLER PLATES 1 1/2 - 2TON
In 1955, fits 1st series only.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-57 DISTRIBUTOR WIRE GROMMET
CV-347
USD $13.69 EA
CHEVROLET 1955-57 DISTRIBUTOR WIRE GROMMET
1/8" sheet metal hole. All passenger.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1949-54 PASSENGER SPEEDO GROMMET
TN-20
USD $14.95 EA
CHEVROLET 1949-54 PASSENGER SPEEDO GROMMET
Driver's side. Two hole. All passenger models.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1941 CAR FIREWALL BODY SUPPORTS
742135
USD $170.00 KIT
CHEVROLET 1941 CAR FIREWALL BODY SUPPORTS
This 1941 Chevrolet passenger firewall lower body support kit is made for STREET RODS ONLY. Made with smooth 16 gauge steel. Made in the USA!

For 1941 Chevrolet Cars


Chevrolet Parts -  1942-1948 CAR FIREWALL BODY SUPPORTS
742175
USD $170.00 KIT
CHEVROLET 1942-1948 CAR FIREWALL BODY SUPPORTS
This 1942-48 Chevrolet passenger firewall lower body support kit is made for STREET RODS ONLY. Made with smooth 12 gauge steel. Made in the USA!

For 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1969-72 TRUCK FIREWALL AND TOE BOARD PANEL
TR-594
USD $219.95 EA
CHEVROLET 1969-72 TRUCK FIREWALL AND TOE BOARD PANEL
TRUCK FIREWALL AND TOE BOARD PANEL

For 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1967-68 TRUCK FIREWALL AND TOE BOARD PANEL
TR-593
USD $249.95 EA
CHEVROLET 1967-68 TRUCK FIREWALL AND TOE BOARD PANEL
TRUCK FIREWALL AND TOE BOARD PANEL

For 1967 1968 Chevrolet Trucks


Chevrolet Parts -  1937-40 PASS BIG BLOCK F/W INSULATOR
TC-22
USD $286.35 EA
CHEVROLET 1937-40 PASS BIG BLOCK F/W INSULATOR
This is a specially made firewall insulator for Street Rod Firewalls made by Direct Sheetmetal Will not fit stock applications. Molded from tough ABS plastic. Custom made to fit firewall with 4" setback for big block. This item is oversize and special freight charges will apply.

For 1937 1938 1939 1940 Chevrolet Cars


Chevrolet Parts -  1937-40 PASS SM. BLOCK F/W INSULATOR
TC-23
USD $286.35 EA
CHEVROLET 1937-40 PASS SM. BLOCK F/W INSULATOR
This is a specially made firewall insulator for Street Rod Firewalls made by Direct Sheet Metal. Will not fit stock applications. Molded from tough ABS plastic. Custom made to fit Direct Sheet Metal firewall with 2" setback. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 1939 1940 Chevrolet Cars


Chevrolet Parts -  1941-48 PASS SM. BLOCK STREETROD F/W INSULATOR
TC-24
USD $286.35 EA
CHEVROLET 1941-48 PASS SM. BLOCK STREETROD F/W INSULATOR
This is a specially made firewall insulator for Street Rod Firewalls made by Bitchin Products. Will not fit stock applications. Molded from tough ABS plastic. Custom made to fit transmission and firewall. This item is oversize and special freight charges will apply.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1941-48 PASS BIG BLOCK STREETROD F/W INSULATOR
TC-25
USD $286.35 EA
CHEVROLET 1941-48 PASS BIG BLOCK STREETROD F/W INSULATOR
This is a specially made firewall insulator for Street Rod Firewalls made by Bitchin Products. Will not fit stock applications. Molded from tough ABS plastic. Custom made to fit transmission and firewall. This item is oversize and special freight charges will apply.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1940 CAR FIREWALL KIT-SMALL BLOCK
740104
USD $363.00 KIT
CHEVROLET 1940 CAR FIREWALL KIT-SMALL BLOCK
This 1940 Chevrolet passenger SMALL BLOCK firewall kit is made for STREET RODS ONLY and features a 2" setback. This firewall is manufactured out of 16 gauge steel and comes complete with instructions needed for installation. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1940 Chevrolet Cars


Chevrolet Parts -  1937-39 CAR FIREWALL KIT-BIG BLOCK
737107
USD $380.00 KIT
CHEVROLET 1937-39 CAR FIREWALL KIT-BIG BLOCK
This 1937-1939 Chevrolet BIG BLOCK Firewall Kit is made for STREET RODS ONLY. This firewall is manufactured out of 16 gauge steel and comes with complete instructions needed for installation. This firewall has a 4" SETBACK for BIG BLOCK ENGINES. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 1939 Chevrolet Cars


Chevrolet Parts -  1940 CAR FIREWALL KIT-BIG BLOCK
740106
USD $380.00 KIT
CHEVROLET 1940 CAR FIREWALL KIT-BIG BLOCK
This 1940 Chevrolet passenger BIG BLOCK firewall kit is made for STREET RODS ONLY and features a 4" setback. Check the measurement of the setback on your firewall as illustrated. This firewall is manufactured out of 16 gauge steel and comes with complete instructions needed for installation. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1940 Chevrolet Cars


Chevrolet Parts -  1941-48 CAR FIREWALL KIT-SMALL BLOCK
742108
USD $380.00 KIT
CHEVROLET 1941-48 CAR FIREWALL KIT-SMALL BLOCK
This 1941-1948 Chevrolet Passenger firewall kit is made for STREET RODS ONLY with SMALL BLOCK with 2" SETBACK. Designed to allow clearance for small block Chevy V-8 engines. This firewall is made in 16 gauge steel and comes with complete instructions needed for installation. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1937-39 CAR FIREWALL KIT-SMALL BLOCK
737105
USD $400.00 KIT
CHEVROLET 1937-39 CAR FIREWALL KIT-SMALL BLOCK
This 1937-1939 Chevrolet SMALL BLOCK Firewall Kit is made for STREET RODS ONLY. This firewall is manufactured out of 16 gauge steel and comes with complete instructions needed for installation. This firewall has a 2" SETBACK for SMALL BLOCK ENGINES. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 1939 Chevrolet Cars


Chevrolet Parts -  1928-1936 PASS FIREWALL-SMALL BLOCK 2" SETBACK
GR-421
USD $400.00 KIT
CHEVROLET 1928-1936 PASS FIREWALL-SMALL BLOCK 2" SETBACK
This street rod firewall is made for 1928-1936 Chevrolet passenger cars that require a 2" setback. Early models (1928-1934) may require trimming for an exact fit. Made to allow clearance for small block Chevy V-8 engines. Shipping weight 35 pounds. This part is oversized and will require special freight charges. Call for a freight quote. Does not qualify for our free freight program.

For 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1937-1946 TRUCK FIREWALL KIT-4" SETBACK
GR-438
USD $402.00 KIT
CHEVROLET 1937-1946 TRUCK FIREWALL KIT-4" SETBACK
Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks


Chevrolet Parts -  1941-48 CAR FIREWALL KIT-BIG BLOCK
742110
USD $406.00 KIT
CHEVROLET 1941-48 CAR FIREWALL KIT-BIG BLOCK
This 1941-1948 Chevrolet Passenger firewall kit is made for STREET RODS ONLY with BIG BLOCK with 4" SETBACK. Designed to allow clearance for big block Chevy V-8 engines. This firewall is made in 16 gauge steel and comes with complete instructions needed for installation. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1928-1936 PASS FIREWALL-BIG BLOCK 4" SETBACK
GR-422
USD $406.00 KIT
CHEVROLET 1928-1936 PASS FIREWALL-BIG BLOCK 4" SETBACK
This street rod firewall is made for 1928-1936 Chevrolet passenger cars that require a 4" setback. Early models (1928-1934) may require trimming for an exact fit. Made to allow clearance for big block Chevy V-8 engines. Shipping weight 35 pounds. This part is oversized and will require special freight charges. Call for a freight quote. Does not qualify for our free freight program.

For 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1947-55 PU&PANEL FIREWALL KIT 1ST
751000
USD $412.00 KIT
CHEVROLET 1947-55 PU&PANEL FIREWALL KIT 1ST
This 1947-1955 (1st Series) Chevrolet pickup and panel truck Firewall Kit is made for STREET RODS ONLY. Check the measurement of the setback on your firewall as illustrated. These firewalls have a 3" setback to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with complete instructions needed for installation. This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1949-54 PASS FIREWALL KIT-4" STRAIGHT SETBACK
GR-427
USD $451.00 KIT
CHEVROLET 1949-54 PASS FIREWALL KIT-4" STRAIGHT SETBACK
SPECIFY WHETHER OR NOT USING A MASTER CYLINDER ON THE FIREWALL. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1962 IMPALA STREETROD FIREWALL 4" SETBACK
GR-575
USD $460.00 EA
CHEVROLET 1962 IMPALA STREETROD FIREWALL 4" SETBACK
This firewall allows 4" clearance for small block or big block Chevy V-8 engines. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1962 Chevrolet Cars


Chevrolet Parts -  1949-54 PASS FIREWALL KIT-4" TAPERED SETBACK
GR-428
USD $468.00 KIT
CHEVROLET 1949-54 PASS FIREWALL KIT-4" TAPERED SETBACK
TO BE USED WITH STOCK BRAKE BOOSTER. SPECIFY WHETHER OR NOT USING A MASTER CYLINDER ON THE FIREWALL. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1947-55 1ST PU FIREWALL KIT-4" SETBACK
GR-444
USD $468.00 KIT
CHEVROLET 1947-55 1ST PU FIREWALL KIT-4" SETBACK
In 1955, used on 1st Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-59 2ND SER TRUCK FIREWALL KIT-1 1/2" SETBACK
GR-447
USD $468.00 KIT
CHEVROLET 1955-59 2ND SER TRUCK FIREWALL KIT-1 1/2" SETBACK
In 1955, used on 2nd Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1955-59 2ND SER TRUCK FIREWALL KIT-4" SETBACK
GR-449
USD $477.00 KIT
CHEVROLET 1955-59 2ND SER TRUCK FIREWALL KIT-4" SETBACK
In 1955, used on 2nd Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1947-55 1ST PU FIREWALL KIT-4" SETBACK -CURVED
GR-444C
USD $485.00 EA
CHEVROLET 1947-55 1ST PU FIREWALL KIT-4" SETBACK -CURVED
This firewall is custom curved and fits 1947-1955 Chevrolet and GMC trucks. In 1955, used on 1st Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-57 PASS STREETROD FIREWALL 4" SETBACK
743110
USD $521.00 EA
CHEVROLET 1955-57 PASS STREETROD FIREWALL 4" SETBACK
This firewall allows 4" clearance for small block or big block Chevy V-8 engines. See also 743125 Toe board & Transmission Cover set made for use with this firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1955-57 PASS ROD FIREWALL 4" SETBACK- CURVED
743110C
USD $525.00 EA
CHEVROLET 1955-57 PASS ROD FIREWALL 4" SETBACK- CURVED
This custom curved firewall fits Chevrolet passenger cars from 1955-1957 and allows 4" clearance for small block or big block Chevy V-8 engines. See also 743125 Toe board & Transmission Cover set made for use with this firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1960-66 TRUCK FIREWALL KIT - 6 1/2" SETBACK
GR-452
USD $548.00 KIT
CHEVROLET 1960-66 TRUCK FIREWALL KIT - 6 1/2" SETBACK
Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1967-72 TRUCK FIREWALL KIT - 5" SETBACK
GR-453
USD $548.00 KIT
CHEVROLET 1967-72 TRUCK FIREWALL KIT - 5" SETBACK
Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

Gaskets
Chevrolet Parts -  1949-54 AIR INLET FIREWALL GASKETS
TN-15
Wait List
CHEVROLET 1949-54 AIR INLET FIREWALL GASKETS
This gasket mounts beween the firewall and the fresh air inlet valve. 1 pair required per car.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1949-54 FIREWALL ACCESS PLATE SEAL
TN-42
Wait List
CHEVROLET 1949-54 FIREWALL ACCESS PLATE SEAL
All passenger models. This is the "kidney shaped" inspection plate that is found on the left side of the firewall.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Grommets
Chevrolet Parts -  11/16" FIREWALL GROMMET - 7/16" ID
32-47
USD $2.40 EA
CHEVROLET 11/16" FIREWALL GROMMET - 7/16" ID
1927-60 Grommet, electric wire through firewall. 7/16” ID. for 11/16” hole. Replaces #117961

For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-59 4-HOLE FIREWALL GROMMET
SA-49
USD $2.95 EA
CHEVROLET 1955-59 4-HOLE FIREWALL GROMMET
This is a 4-Hole Firewall Grommet for 1955-1959 (2nd Series) Chevrolet & GMC Trucks. For hole size 1-1/16".

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1947-1955 HEATER HOSE FIREWALL GROMMET
TN-77
USD $2.95 EA
CHEVROLET 1947-1955 HEATER HOSE FIREWALL GROMMET
This is a Heater Hose Firewall Grommet for 1947-1955 Chevrolet & GMC cars & Trucks. Grommet dimensions: OD 1-1/2" x ID 7/8" for Hole Size 1-1/8". Two required per vehicle. Specific Applications: 1947-1955 (1st Series) Trucks; 1949-1954 Passenger Cars

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  1941-59 FIREWALL WIRING LOOM SEAL
SA-51
USD $3.50 EA
CHEVROLET 1941-59 FIREWALL WIRING LOOM SEAL
FIREWALL WIRING LOOM SEAL

For 1939 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-1949 TRUCK FIREWALL GROMMET 4-HOLE
SA-84
USD $3.50 EA
CHEVROLET 1947-1949 TRUCK FIREWALL GROMMET 4-HOLE
This is a rubber firewall grommet for 1947-1949 Chevrolet & GMC trucks. It has 4-holes for choke & throttle cables, temperature gauge tube & oil pressure line. Grommet has an OD of 1-5/8". Replaces GM# 3684771

For 1947 1948 1949 Chevrolet Trucks


Chevrolet Parts -  1960-1966 TRUCK STARTER WIRE FIREWALL SEAL
CD-48
USD $3.75 EA
CHEVROLET 1960-1966 TRUCK STARTER WIRE FIREWALL SEAL
STARTER WIRE FIREWALL SEAL

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1967-1972 TRUCK FIREWALL GROMMET
CD-90
USD $4.50 EA
CHEVROLET 1967-1972 TRUCK FIREWALL GROMMET
This is a Rubber Firewall Grommet with Metal Insert for 1967-1972 Chevrolet & GMC trucks. The grommet has three metal tabs out the back for mounting.

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1929-1939 VACUUM LINE FIREWALL GROMMET
32-64
USD $5.69 EA
CHEVROLET 1929-1939 VACUUM LINE FIREWALL GROMMET
This vacuum line firewall grommet fits all 1929-1939 Chevrolet passenger cars & 1929-1942 Chevy & GMC Trucks that have a 3/4" hole for the vacuum line. Replaces GM# 379082, 3681751. Grommet OD is 1"; ID 1/4" for 3/4" hole.

For 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks


Chevrolet Parts -  1960-1966 TRUCK MAIN WIRE FIREWALL GROMMET
CD-47
USD $6.00 EA
CHEVROLET 1960-1966 TRUCK MAIN WIRE FIREWALL GROMMET
MAIN WIRE FIREWALL GROMMET

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1939 VACUUM HOSE FIREWALL GROMMET
32-438
USD $6.05 EA
CHEVROLET 1939 VACUUM HOSE FIREWALL GROMMET
1939 Grommet. Vacuum hose through firewall. 1/2” ID x 1-1/16” OD. For 3/4” sheet metal hole. As required.

For 1939 Chevrolet Cars


Chevrolet Parts -  1949-52 HEATER CABLE FIREWALL SEAL
32-513
USD $6.59 EA
CHEVROLET 1949-52 HEATER CABLE FIREWALL SEAL
1949-52 Grommet. Heater vent control cable through firewall. For 3/4” hole in sheet metal. 3/16” sloping hole ID. All models.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1947-62 4-HOLE FIREWALL GROMMET
CV-276
USD $7.15 EA
CHEVROLET 1947-62 4-HOLE FIREWALL GROMMET
Throttle cable oil line temperature line and choke cable. All models.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-59 TRUCK FIREWALL GROMMET KIT-4PCS
CV-314
USD $9.50 KIT
CHEVROLET 1955-59 TRUCK FIREWALL GROMMET KIT-4PCS
Replaces GM #370730. 1933: All passenger 1934-35: Standard only

For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1932 FIREWALL OBLONG GROMMET
RW-268
Wait List
CHEVROLET 1932 FIREWALL OBLONG GROMMET
Fits steel retainer for throttle and choke cables oil and temperature lines. 7/16" x 1 1/8" x 3 7/8". All models

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-49 TRUCK FIREWALL GROMMET KIT-6PCS
CV-310
USD $11.95 KIT
CHEVROLET 1947-49 TRUCK FIREWALL GROMMET KIT-6PCS
-

For 1947 1948 1949 Chevrolet Trucks


Chevrolet Parts -  1950-1955 TRUCK FIREWALL GROMMET KIT-5PCS
CV-312
USD $11.95 KIT
CHEVROLET 1950-1955 TRUCK FIREWALL GROMMET KIT-5PCS
This is a 5-piece Rubber Firewall Grommet Kit for 1950-1955 (1st Series) Chevrolet & GMC trucks.

For 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1940-1948 CAR FIREWALL GROMMET 3-HOLE
CV-132
USD $13.95 EA
CHEVROLET 1940-1948 CAR FIREWALL GROMMET 3-HOLE
This is a rubber firewall grommet for 1940-1948 Chevrolet passenger cars. It has 3-holes for throttle cable, temperature gauge tube & oil pressure line. Grommet has an OD of 1-5/8". Replaces GM# 3653785

For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1949-52 FIREWALL GROMMET-7/8" HOLE
32-394
USD $13.99 EA
CHEVROLET 1949-52 FIREWALL GROMMET-7/8" HOLE
1949-52 Grommet. Firewall utility for 7/8” hole in sheet metal. 1/8” ID x 1-3/16” OD. As required. Quality Rubber - Made in the USA!

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1939-1948 HANDBRAKE TO FIREWALL GROMMET
60-167
USD $15.50 EA
CHEVROLET 1939-1948 HANDBRAKE TO FIREWALL GROMMET
This grommet is the seal used for the hand brake pull rod through the firewall for all 1939-1948 Chevrolet passenger cars, including Sedan Delivery. Dimensions: 1-5/8" OD with 3/8" ID hole. Replaces GM# 3653684

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars


Chevrolet Parts -  1936-1946 TRUCK FIREWALL GROMMET KIT-6PCS
CV-210
USD $19.95 KIT
CHEVROLET 1936-1946 TRUCK FIREWALL GROMMET KIT-6PCS
This firewall grommet kit fits Chevrolet trucks from 1936-1946. Six piece set.

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks


Chevrolet Parts -  1937-42 FIREWALL GROMMET
32-196
USD $22.99 EA
CHEVROLET 1937-42 FIREWALL GROMMET
1937-42 Grommet. Wire harness through firewall. Some models.

For 1937 1938 1939 1940 1941 1942 Chevrolet Cars and Trucks


Chevrolet Parts -  1958 FIREWALL UTILITY GROMMET
60-385
USD $28.59 EA
CHEVROLET 1958 FIREWALL UTILITY GROMMET
Four marked holes, can handle up to 4 wires. Style #1249 and probably others.

For 1958 Chevrolet Cars


Chevrolet Parts -  1932-46 FIREWALL CABLE GROMMET
60-10
USD $32.89 EA
CHEVROLET 1932-46 FIREWALL CABLE GROMMET
1933-39 Grommet, firewall, oblong style. Replaces #3681071. Fits steel retainer for throttle and choke cables, oil and temperature lines. 7/16” x 1-1/8” x 3-7/8”. All models.

For 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks


Chevrolet Parts -  1949-52 CONVT TOP FIREWALL GROMMET
60-565
USD $42.49 EA
CHEVROLET 1949-52 CONVT TOP FIREWALL GROMMET
1949-52 Grommet. Convertible top hydraulic lines through firewall. Convertibles only.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1947-48 CONV'T TOP FIREWALL GROMMET
70-554
USD $56.99 EA
CHEVROLET 1947-48 CONV'T TOP FIREWALL GROMMET
1947-48 Grommet. Special rectangular 2-hole for left side of cowl for hydraulic lines through sheet metal. Convertibles only.

For 1947 1948 Chevrolet Cars

Hardware
Chevrolet Parts -  CHRISTMAS TREE FIREWALL INSULATION RETAINER
CV-586
USD $0.50 EA
CHEVROLET CHRISTMAS TREE FIREWALL INSULATION RETAINER
This nylon, "Christmas tree" style firewall insulation retainer is 1-5/16" in length. Most applications take 9 pieces. Replaces GM# 3730562

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks


Chevrolet Parts -  1967-72 FIREWALL KICKBOARD RETAINER
CD-87
USD $1.75 EA
CHEVROLET 1967-72 FIREWALL KICKBOARD RETAINER
This is a Rubber Firewall Kickboard Retainer for 1967-1972 Chevrolet & GMC Trucks. Approximately 10 required per vehicle.

For 1967 1968 1969 1970 1971 1972 Chevrolet Cars


Chevrolet Parts -  1933-1955 SCISSORS FIREWALL INSULATOR CLIP
DC-611A
USD $3.95 EA
CHEVROLET 1933-1955 SCISSORS FIREWALL INSULATOR CLIP
This is a Factory Scissors Style Firewall Pad Retaining Clip for 1933-1954 Chevrolet & GMC cars & trucks. The clip is made in metal. Up to 9 pieces required per vehicle. Overall length is 1.5 inches. Also see CV-586 plastic retainer. Replaces GM# 3692752 Specific Applications: 1933-1955 Passenger Cars; 1947-1955 Chevy & GMC Trucks

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 PASS FIREWALL CLIP SET-SET OF 6
GR-221
USD $14.50 SET
CHEVROLET 1932 PASS FIREWALL CLIP SET-SET OF 6
This is a set of REPLACEMENT STYLE Clips for 1932 Chevrolet Passenger vehicles.

For 1932 1933 1934 Chevrolet Cars


Chevrolet Parts -  1947-55 PICKUP FIREWALL BRACES - STAINLESS
SA-425SS
USD $169.00 PR
CHEVROLET 1947-55 PICKUP FIREWALL BRACES - STAINLESS
This is a pair of Stainless Firewall Braces for 1947-1955 (1st Series) Chevrolet & GMC trucks. These braces extend from the firewall to the inner fender. Approx. 29-1/2" long.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks

Insulators
Chevrolet Parts -  1955-59 TRUCK FIREWALL INSULATOR
TC-2
USD $169.00 EA
CHEVROLET 1955-59 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1937-46 TRUCK FIREWALL INSULATOR
TC-8
USD $189.00 EA
CHEVROLET 1937-46 TRUCK FIREWALL INSULATOR
This is an ABS Firewall Insulator for 1937-1946 Chevrolet & GMC trucks. Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks


Chevrolet Parts -  1954-55  TRUCK FIREWALL INSULATOR
TC-13
USD $189.00 EA
CHEVROLET 1954-55 TRUCK FIREWALL INSULATOR
This firewall kickboard is made with ABS material and molded to fit the original the original transmission and firewall curves of 1954-55 1st series Chevrolet and GMC trucks. This pad comes in a leather grain texture finish with a properly punched insulation pad attached. Compare to you original insulator, see also TC-1. Made in the USA! This product is over size and special shipping charges will apply. Call or email us for a freight quote.

For 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1947-53 TRUCK FIREWALL INSULATOR
TC-1
USD $199.00 EA
CHEVROLET 1947-53 TRUCK FIREWALL INSULATOR
This firewall kickboard is made with ABS material and molded to fit the original the original transmission and firewall curves of 1947-1953 Chevrolet and GMC trucks. This pad comes in a leather grain texture finish with a properly punched insulation pad attached. Compare to you original insulator, see also TC-13. Made in the USA! Replaces GM# 3687451, 3693009 This product is over size and special shipping charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1934 STANDARD PASS FIREWALL INSULATOR
TC-P34S
USD $201.25 EA
CHEVROLET 1934 STANDARD PASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1934 Chevrolet Cars


Chevrolet Parts -  1929-1930 CAR & TRUCK FIREWALL INSULATOR
TC-P2930
USD $213.90 EA
CHEVROLET 1929-1930 CAR & TRUCK FIREWALL INSULATOR
This firewall insulator fits all 1929-1930 Chevrolet cars & trucks. Replace that dried-up, cracked or missing firewall insulator with a new die-cut rubber insulator. Made to fit firewall curves just like the originals. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are rubber and a show quality piece, Made in the USA!

For 1929 1930 Chevrolet Cars and Trucks


Chevrolet Parts -  1931 CAR & TRUCK FIREWALL INSULATOR
TC-P31
USD $213.90 SET
CHEVROLET 1931 CAR & TRUCK FIREWALL INSULATOR
This firewall insulator fits all 1931 Chevrolet passenger cars and trucks. Replace that dried-up, cracked or missing firewall insulator with a new die-cut rubber insulator. Made to fit firewall curves just like the originals. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This insulator is rubber and comes in a 3-piece set.

For 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 PASSENGER FIREWALL INSULATOR
TC-P32
USD $213.90 SET
CHEVROLET 1932 PASSENGER FIREWALL INSULATOR
This firewall insulator fits all 1932 Chevrolet passenger cars & trucks. Replace that dried-up, cracked or missing firewall insulator with a new die-cut rubber insulator. Made to fit firewall curves just like the originals. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This insulator is rubber and comes in a 3-piece set.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1960-63 TRUCK FIREWALL INSULATOR
TC-3
USD $261.05 EA
CHEVROLET 1960-63 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1960 1961 1962 1963 Chevrolet Trucks


Chevrolet Parts -  1964-66 TRUCK FIREWALL INSULATOR
TC-4
USD $261.05 EA
CHEVROLET 1964-66 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1964 1965 1966 Chevrolet Trucks


Chevrolet Parts -  1967-72 TRUCK FIREWALL INSULATOR
TC-5
USD $261.05 EA
CHEVROLET 1967-72 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1973-79 TRUCK FIREWALL INSULATOR
TC-T7379
USD $261.05 EA
CHEVROLET 1973-79 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1973 1974 1975 1976 1977 1978 1979 Chevrolet Trucks


Chevrolet Parts -  1980-87 TRUCK FIREWALL INSULATOR
TC-T8087
USD $261.05 EA
CHEVROLET 1980-87 TRUCK FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks


Chevrolet Parts -  1933 MAST.PASS FIREWALL INSULATOR
TC-P33M
USD $282.89 EA
CHEVROLET 1933 MAST.PASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1933 Chevrolet Cars


Chevrolet Parts -  1934 MAST.PASS FIREWALL INSULATOR
TC-P34M
USD $282.89 EA
CHEVROLET 1934 MAST.PASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1934 Chevrolet Cars


Chevrolet Parts -  1948 Passenger  FIREWALL INSULATOR-EARLY
TC-P48E
USD $282.89 EA
CHEVROLET 1948 Passenger FIREWALL INSULATOR-EARLY
This Firewall insulator fits EARLY model 1948 Chevrolet Passenger vehicles. Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a stretched piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email for a freight quote.

For 1948 Chevrolet Cars


Chevrolet Parts -  1947-54 PU STREETROD FIREWALL INSULATOR
TC-21
USD $286.35 EA
CHEVROLET 1947-54 PU STREETROD FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1937-38 PASS FIREWALL INSULATOR
TC-6
USD $294.39 EA
CHEVROLET 1937-38 PASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1937 1938 Chevrolet Cars


Chevrolet Parts -  1939 PASSENGER FIREWALL INSULATOR
TC-7
USD $294.39 EA
CHEVROLET 1939 PASSENGER FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1939 Chevrolet Cars


Chevrolet Parts -  1940-41 Passenger  FIREWALL INSULATOR
TC-P4041
USD $294.39 EA
CHEVROLET 1940-41 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1940 1941 Chevrolet Cars


Chevrolet Parts -  1942-47 Passenger  FIREWALL INSULATOR
TC-P4247
USD $294.39 EA
CHEVROLET 1942-47 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1942 1944 1945 1946 1947 Chevrolet Cars


Chevrolet Parts -  35-36 MAST.PASS FIREWALL INSULATOR
TC-P3536M
USD $313.95 EA
CHEVROLET 35-36 MAST.PASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1935 1936 Chevrolet Cars


Chevrolet Parts -  1935-36 StandardPASS FIREWALL INSULATOR
TC-P3536S
USD $313.95 EA
CHEVROLET 1935-36 StandardPASS FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1935 1936 Chevrolet Cars


Chevrolet Parts -  1948 Passenger  FIREWALL INSULATOR-LATE
TC-P48
USD $324.30 EA
CHEVROLET 1948 Passenger FIREWALL INSULATOR-LATE
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1948 Chevrolet Cars


Chevrolet Parts -  1949-50 Passenger  FIREWALL INSULATOR
TC-P4950
USD $335.80 EA
CHEVROLET 1949-50 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars


Chevrolet Parts -  1951-52 Passenger  FIREWALL INSULATOR
TC-P5152
USD $335.80 EA
CHEVROLET 1951-52 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1951 1952 Chevrolet Cars


Chevrolet Parts -  1953-54 Passenger  FIREWALL INSULATOR
TC-P5354
USD $335.80 EA
CHEVROLET 1953-54 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1953 1954 Chevrolet Cars


Chevrolet Parts -  1955 Passenger  FIREWALL INSULATOR
TC-P55
USD $335.80 EA
CHEVROLET 1955 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1955 Chevrolet Cars


Chevrolet Parts -  1956 Passenger  FIREWALL INSULATOR
TC-P56
USD $335.80 EA
CHEVROLET 1956 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1956 Chevrolet Cars


Chevrolet Parts -  1957 Passenger  FIREWALL INSULATOR
TC-P57
USD $335.80 EA
CHEVROLET 1957 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1957 Chevrolet Cars


Chevrolet Parts -  1958 Passenger  FIREWALL INSULATOR
TC-P58
USD $335.80 EA
CHEVROLET 1958 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1958 Chevrolet Cars


Chevrolet Parts -  1963-64 Passenger  FIREWALL INSULATOR
TC-P6364
USD $335.80 EA
CHEVROLET 1963-64 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1963 1964 Chevrolet Cars


Chevrolet Parts -  1959-60 CAR FIREWALL INSULATOR
TC-P5960
USD $335.80 EA
CHEVROLET 1959-60 CAR FIREWALL INSULATOR
This is a Firewall Insulator for 1959-1960 Chevrolet passenger cars, including El Camino. Replace that dried-up torn or missing firewall insulator with a new one molded from tough fiberglass material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1959 1960 Chevrolet Cars

101 Items
Showing 1 thru 100
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com