This one-piece Vulcanized Rear Window Seal fits 1936-1938 Chevrolet and GMC LOW ROOF trucks. This seal comes complete with pre-drilled mounting holes in the original location, for use with your original cast metal retainer. Replaces GM #476638. Made in the USA.
This is a one-piece molded Back Window weather-strip channel for 1939-1942 Chevrolet and GMC trucks WITH Die Cast Retainer. NOTE: in 1942 this seal is used on early models only. ALL MODELS EXCEPT PANEL & SUBURBAN This seal comes molded with holes to fit your original die cast retainer. Dimensions: 10-1/2" Wide x 28-1/2" Long, Overall length 65-5/8". Replaces GM# 599071 Made in the USA!
1955-66 2nd Series Seal, vent window post With metal core and rivet holes as original. All Trucks except G-10 and van. Exactly as original - a nice reproduction.
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a Pair of Vulcanized Rear Window Glass Seals for 1968-1972 Chevrolet & GMC Suburban or Panel Trucks with Barn Doors. This set comes with two vulcanized glass seals and locking strip rubber for both rear door glass installation. Made in the USA, this high quality set is made by Steele Rubber Products.
1962-66 Suburban fixed side window seals for windows with sharp corners. Heavy, top quality rubber seals molded in one piece with mitered corners for exact fit. Sold in pairs only.
This is the horizontal Header Strip Channel for the side windows on 1925-1932 Chevrolet cars & trucks. Superior quality plush lined rubber channel for across top of doors above side windows on closed bodies. Made for 1/4” glass, 1/2” overall width. Sold by the foot, please check measurements before ordering. 4-door models take 11 Ft. for all 6 windows 2-door sedans take 10 Ft. for all 4 windows NOTE: Original Chevrolet passenger cars & trucks only had a thin piece of felt across the top of door windows. This window channel is a high quality replacement for the felt. It was used on more expensive GM cars in this period.
For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
1926-36 Seal, lower side window. Fastens to inner face of door to seal against outer side of glass. 1926-31 Seal. Crank-up windshield top. L-shaped strip fastens to windshield header facing glass to seal across top. Many models with crank-up windshield. Approximately four (4) feet required per windshield. Many models Fastens to windshield header facing glass to seal across top. Many models with crank-up windshields. Approx. 4ft. required per windshield.
For 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
This felt pushes over the large rivet at the end of the regulator arm. It rides in the sash guide. 1 pair required per regulator. Replaces original leather pieces. Made in the USA!
For 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars and Trucks
This is a vent window assembly with CLEAR GLASS for 1968-1972 Chevrolet & GMC Trucks. Specify Right or Left when ordering. Replaces GM# 3936801, 3936802, 3936803, 3936804
This is a vent window assembly with CLEAR GLASS for 1968-1972 Chevrolet & GMC Trucks. Specify Right or Left when ordering. Replaces GM# 3936801, 3936802, 3936803, 3936804
Use this rivet when removing vent window frames to replace weather strips. It has a special shoulder for this purpose. One (1) required per vent window. Compare dimensions: Overall length before install - .346"; Head Diameter - .293"; Shoulder OD - .215"
30 inch strip. Vent window division bar seals are the vertical sealing surface that is attached to the division post. C-40 is a universal rubber-only substitute for seals that are not offered with a metal core like the originals. Note: In 1955, used on 1st Series only. Compare to 60-663, vent post seal with metal core as original.
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
These channels are a nice replacement for the original that may have rusted out. You must retain the old brackets to reattach to the new channel. 4-FT. SECTION, .405" (13/32") ID AT NARROWEST PART This part is oversize and special freight charges will apply. Call or email us for a freight quote.
These weather-strips and window channels are specifically for 1955 thru 1966 Chevrolet & GMC Suburban's! The early Suburban's had rounded corners on the side windows. Our CD-25 & CD-26 kits are for these trucks. ONE KIT DOES ONE WINDOW. The later design had a sharp bend on the corners and the rubber seals are now available for them! In addition - we also have the seals for 1962-66 models with a fixed side window. Do a Suburban "Seal Up" with these great parts!
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This chrome handle is for the window crank on all 1940-1946 Chevrolet & GMC trucks. It has a Rose Tan knob which is a light brown color. Replaces GM# 3654632. Will also fit 1939 trucks.
For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This chrome handle is for the window crank on all 1939 Chevrolet & GMC trucks. It has a black knob with a square shank opening. Replaces GM# 598910. Will also fit 1940-1946 trucks.
This is a window crank knob for all 1935-1939 Chevrolet & GMC trucks. The color is black. This knob comes with a stud to mount it to the handle. Part of assembly GM# 598910, 4200151
This is a window crank knob for all 1940-1946 Chevrolet & GMC trucks. The color is called Rose Tan and it is a light brown color. This knob comes with a stud to mount it to the handle. Part of assembly GM# 3654632
For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This window crank knob fits all 1954-1966 Chevrolet & GMC trucks. It is black plastic and comes with mounting stud. Part of handle assembly GM# 3702164. Limited Supply - call for availability.
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a Flexible Corrugated Steel Channel that is cloth covered and mohair lined. This is a 7/8" wide channel for 1947-1950 Chevrolet & GMC truck door windows with no vent windows that have metal trim on the edge of the door glass. 90" strip - one required per door. See manufacturer's installation video: Click here to viewReplaces GM# 3684434. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This seal is sold in a straight section to seal the LARGE rear window on 1955-1966 Chevrolet and GMC trucks with deluxe cabs. This two piece set comes with a BLACK locking strip. Length is 157 inches and it will seal one back window. Replaces GM# 3847414, 3847415
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This seal is sold in a straight section to seal the LARGE rear window on 1955-1966 Chevrolet and GMC (2nd Series) trucks with deluxe cabs. This two piece set comes with a BLACK locking strip. Length is 157 inches and it will seal one back window. Replaces GM# 3847414, 3847415
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
These Lower Outer Window Seals fit on the outer edge of 1947-1955 1st Series Chevrolet and GMC Pickups. These 27" seals are the correct length for 1947-1950 models without wing windows, for models with wing windows these seals must be cut to length. One pair required per truck. They are held in place, down inside the door in a crimp channel. Replaces GM 3847608
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1955-1959 (2nd Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. See manufacturer's installation video: Click here to view Replaces GM# 3716603, 3716604 Specific Applications: 1955 - 1959 Chevrolet - Truck 1955 - 1955 GMC - 100 1955 - 1959 GMC - 150 1955 - 1959 GMC - 250 1955 - 1959 GMC - 300 1955 - 1959 GMC - 350-8 1955 - 1959 GMC - 370 1959 - 1959 Chevrolet - 3B 1959 - 1959 Chevrolet - 3C 1959 - 1959 Chevrolet - 3D 1959 - 1959 Chevrolet - 3E 1959 - 1959 Chevrolet - 3F 1959 - 1959 Chevrolet - 3G
This is a 4-piece Vent Window Rubber Seal Kit for 1960-1963 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3757729, 3757730
This is a 4-piece Vent Window Rubber Seal Kit for 1964-1966 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3794815, 3794816
This is a 4-piece Vent Window Rubber Seal Kit for 1951-1955 (1st Series) Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3696027, 3696028
This is a Felt Lined, Rubberized Metal Backed, Flexible Door Window Channel for 1934-1955 Chevrolet & GMC trucks. Channel comes in an 8 foot length and is 5/8" wide, non-beaded. Specific Applications: 1925-1932 Passenger - Used as a replacement for street rod applications only 1934-46: All Trucks 1947-50: Not Used - See CV-129 1951-1955 (1st Series) Trucks
This is a 5 Foot Door Window Channel for 1951-1955 (1st Series) Chevrolet & GMC Trucks. Used as a replacement channel for 1932 & earlier Chevrolet passenger cars that originally used rubber window channel. Not an original part for that application, but a great replacement for street rods. This channel has no stainless beaded edge trim.
This is a set of vent window seals for 1973-1980 Chevrolet & GMC trucks. The set consists of two vertical post seals and two main rubber seals for left and right sides. Replaces GM# 6271905, 6271906
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This is a Set of Vent Window Seals for 1981-1985 Chevrolet & GMC trucks. This kit is the two piece design that fits both driver and passenger doors. Be aware that there is a 1 and 2 piece design available for these years. Be sure to purchase the correct ones as they are not interchangeable. See manufacturer's installation video: Click here to view
This is a Glass Run Channel including the division post channel for 1981-1991 Chevrolet & GMC Trucks. Protect your vehicleÂ’s interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked door weatherstrip with a proven product thatÂ’s accepted in the industry. Made from the OEM specs to install and fit for an authentic appearance. The glass run simply presses into the front, top & back section of the door channel. The installed clip secures the corner to the top of the division bar. Includes channel on vent window side. Specify Left or Right when ordering. See manufacturer's installation video: Click here to view
For 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This is a Glass Run Channel including the division post channel for 1981-1991 Chevrolet & GMC Trucks. Protect your vehicleÂ’s interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked door weatherstrip with a proven product thatÂ’s accepted in the industry. Made from the OEM specs to install and fit for an authentic appearance. The glass run simply presses into the front, top & back section of the door channel. The installed clip secures the corner to the top of the division bar. Includes channel on vent window side. Specify Left or Right when ordering. See manufacturer's installation video: Click here to view
For 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a black rubber locking strip. Length is 92 inches and it will seal either one back window or two corner windows on custom cabs. Replaces GM# 3847414, 3847415 NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a CHROME locking strip. Length is 92 inches and it will seal one small back window. Replaces GM# 3847414, 3847415 NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These seals are sold in a straight section to seal the two rear quarter windows on 1947-1955 (1st Series) Chevrolet and GMC trucks with deluxe cabs. This four piece set comes with BLACK rubber locking strips. Length is 46 inches and it will seal two corner windows on custom cabs. Replaces GM# 3847414, 3847415
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is Rubber Door Window Channel for 1962-1966 Chevrolet & GMC trucks with NO Metal frame on the glass. Channel runs from top of the vent window across the door window and down the back side. Two pieces needed per truck. "W" Shaped rubber snaps into the window opening for a quick installation.
This is a set of lower window felts for 1955-1959 (2nd Series) Chevrolet & GMC Trucks. These belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
The belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
This is a window regulator roller & rivet for a 5/16" hole. Used on most 1937-1960 Chevrolet & GMC cars & trucks . Two to four required per window regulator. V-groove nylon wheel has an Outside Diameter of 3/4".
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks
This is a 4-piece Vent Window Rubber Seal Kit for 1967-1972 Chevrolet & GMC trucks. Kit includes the main seals around the front of the vent glass and also the vertical seals on the vent post. Replaces GM# 3925965, 3925966
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
1967-1972 Chevrolet & GMC Upper Door Window Channel. This glass run simply presses into the door channel of the top and back part of the door. This single piece fits either the driver or passenger doors. 2 pieces required per truck. Specific Applications: 1967 - 1972 Chevrolet - C10 Pickup 1967 - 1972 Chevrolet - C20 Pickup 1967 - 1972 Chevrolet - C30 Pickup 1967 - 1972 Chevrolet - K10 Pickup 1967 - 1972 Chevrolet - K20 Pickup 1967 - 1972 GMC - C15/C1500 Pickup 1967 - 1972 GMC - C25/C2500 Pickup 1967 - 1972 GMC - C35/C3500 Pickup 1967 - 1972 GMC - K15/K1500 Pickup 1967 - 1972 GMC - K25/K2500 Pickup 1968 - 1972 GMC - K35/K3500 Pickup
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
1967-1972 Chevrolet & GMC Trucks Back Window Glass Seal for Deluxe Applications with Stainless Trim inserted into the rubber. This rear window seal fits the large rear window. This application goes first on the glass and is installed using the rope-in method. The trim groove requires you to re-use your chrome trim. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. See manufacturer's installation video: Click here to view Specific Applications: 1967 - 1972 Chevrolet - C10 Pickup 1967 - 1972 Chevrolet - C20 Pickup 1967 - 1972 Chevrolet - C30 Pickup 1967 - 1972 Chevrolet - K10 Pickup 1967 - 1972 Chevrolet - K20 Pickup 1967 - 1972 GMC - C15/C1500 Pickup 1967 - 1972 GMC - C25/C2500 Pickup 1967 - 1972 GMC - C35/C3500 Pickup 1967 - 1972 GMC - K15/K1500 Pickup 1967 - 1972 GMC - K25/K2500 Pickup 1968 - 1972 GMC - K35/K3500 Pickup
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
1967-1972 Chevrolet & GMC Trucks Back Window Glass Seal for Standard Applications with plain rubber. This rear window seal fits the large rear window. This application goes first on the glass and is installed using the rope-in method. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. See manufacturer's installation video: Click here to view Specific Applications: 1967 - 1972 Chevrolet - C10 Pickup 1967 - 1972 Chevrolet - C20 Pickup 1967 - 1972 Chevrolet - C30 Pickup 1967 - 1972 Chevrolet - K10 Pickup 1967 - 1972 Chevrolet - K20 Pickup 1967 - 1972 GMC - C15/C1500 Pickup 1967 - 1972 GMC - C25/C2500 Pickup 1967 - 1972 GMC - C35/C3500 Pickup 1967 - 1972 GMC - K15/K1500 Pickup 1967 - 1972 GMC - K25/K2500 Pickup 1968 - 1972 GMC - K35/K3500 Pickup
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
1967 Chevrolet & GMC Trucks Back Window Glass Seal. This rear window seal fits the SMALL rear window and goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Made from ozone resistant EPDM rubber and from the same OE specs as the original for an authentic fit and finish. Specific Applications: 1967 - 1968 Chevrolet - C10 Pickup 1967 - 1968 Chevrolet - C20 Pickup 1967 - 1968 Chevrolet - C30 Pickup 1967 - 1968 Chevrolet - K10 Pickup 1967 - 1968 Chevrolet - K20 Pickup 1967 - 1968 GMC - C15/C1500 Pickup 1967 - 1968 GMC - C25/C2500 Pickup 1967 - 1968 GMC - C35/C3500 Pickup 1967 - 1968 GMC - K15/K1500 Pickup 1967 - 1968 GMC - K25/K2500 Pickup 1968 - 1968 GMC - K35/K3500 Pickup
This is a REAR SLIDER WINDOW for 1947-1955 (1st Series) Chevrolet & GMC trucks. Slider comes with Gray Tinted Solar Glass. Frame Measurements: Width 31-1/8" (791 mm); Height 10-3/8" (264 mm).Daylight dimensions when fully open: 10-7/8" x 7-3/4" (272 x 197 mm). Glass items require special handling and packaging - special freight charges will apply. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a REAR SLIDER WINDOW for 1955-1959 (2nd Series) Chevrolet & GMC trucks with Small Back Window. Slider comes with Gray Tinted Solar Glass. Frame Measurements: Width 35" (889 mm); Height 10-5/8" (270 mm). Daylight dimensions when fully open: 13-5/8" x "8 (332 x 203 mm). Glass items require special handling and packaging - special freight charges will apply. Call or email us for a freight quote.
This is a door window regulator for 1967-1971 Chevrolet & GMC trucks, including Blazer & Jimmy with removeable top. Specify Right or Left when ordering. Replaces GM# 3887981, 3887982
This is a door window regulator for 1967-1971 Chevrolet & GMC trucks, including Blazer & Jimmy with removeable top. Specify Right or Left when ordering. Replaces GM# 3887981, 3887982
This is a door window regulator for 1972 Chevrolet & GMC trucks, including Blazer & Jimmy. Specify Right or Left when ordering. Replaces GM# 3993191, 3993192
This is a door window regulator for 1972 Chevrolet & GMC trucks, including Blazer & Jimmy. Specify Right or Left when ordering. Replaces GM# 3993191, 3993192
This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
The belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
This is a set of Beltline Window Felts for 1967-1972 Chevrolet & GMC trucks. These pieces are installed on the door window openings at the bottom on inside and outside of each window to help stabilize the glass. Belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation. This set is plain Black Felt, as original. Also available is a beltline window felt set with chrome beaded edge for a custom look.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a set of Beltline Window Felts for 1967-1972 Chevrolet & GMC Suburban REAR Door Windows - BLACK. These pieces are installed on the door window openings at the bottom on inside and outside of each window to help stabilize the glass. Belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation. This set is plain Black Felt, as original. Also available with Chrome Beaded Edge.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks