Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1955-1957 Chevrolet tail pan brace that specifically fits Station Wagon and Nomad models. The brace is connected to the bottom of the tail pan for extra structural integrity in the rear trunk area.
This is a plywood Toe Board for all 1934-1936 Chevrolet Truck High and Low Roof Cab. It has the proper holes, cuts, tapers, and thickness. Includes installed brass grommet that protects wood from the metal accelerator rod. Dimensions 11-1/8" x 34-1/2". Made in USA. This part is oversize and special freight charges apply. Call or email us for a freight quote.
1953-1954 Chevrolet Passenger Car Toe Board Repair Panel. The Toe Board Is The Panel Between The Floor Pan And The Firewall. Specify Right or Left when ordering.
1953-1954 Chevrolet Passenger Car Toe Board Repair Panel. The Toe Board Is The Panel Between The Floor Pan And The Firewall. Specify Right or Left when ordering.
This toe board tapered metal panel fits below the firewall on 1947-1955 1st series Chevrolet and GMC trucks and includes the gas pedal attachment. Three clips are packaged separtely to weld to the raised squares (if you are an original restorer and requires support for the speedometer cable and wiring harness segment that is under the floor) with welding instructions. Panel is ready to weld to your cab floor edges and center after the rusty original is removed. Even has the holes on the left side for the foot brake assembly. Comes as two halves, requires welding. In 1955 fits 1st series only.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This sheet metal panel is the front floor pan-tool tray for all 1931 & 1932 Chevrolet Roadsters. It also fits all 1929-1931 Chevrolet Touring cars (Phaetons). This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is the Tool Tray for under the seat of 1931-1932 Chevrolet Coupe & Cabriolet models. Dimensions: 32-1/2" x 11-1/2" x 2-1/2" This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This tool tray is made for all 1931 & 1932 Chevrolet 2 & 4 door sedans, also 5-Passenger Coupe & Landau Phaeton. It fits under the seat and is nailed into the wood. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a sheet metal transmission cover plate for all 1947-1955 Chevrolet & GMC trucks with 3-Speed transmission. In 1955, used on 1st Series only. Replaces GM# 3697605
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This bolt in transmission cover fits 1967-1972 2WD Big Block and 4WD Chevrolet and GMC trucks. Due to the number of shifter and transfer case arrangements available, this part requires that you cut your own holes for floor shifters and transfer cases. Specific Applications: 1967-1972 Chevrolet Pickup Truck 1967-1972 GMC Pickup Truck 1969-1972 Chevrolet Blazer 1969-1972 GMC Jimmy 1967-1972 Chevrolet Suburban This part is oversize and is subject to additional shipping charges. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This 1937-1939 Chevrolet passenger transmission cover is made FOR STREET RODS ONLY and allows clearance for auto transmissions. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This 1940 Chevrolet passenger transmission cover is made FOR STREET RODS ONLY and allows clearance for auto transmissions. Intended for use with stock floor and firewall. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This 1941-1948 Chevrolet passenger transmission cover is made FOR STREET RODS ONLY and allows clearance for auto transmissions. Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This street rod transmission cover fits 1928-1936 Chevrolet passenger cars. Shipping Weight 17 pounds. This part is oversized and will require special freight charges. Call for a freight quote. Does not qualify for our free freight program.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
Three piece set (left & right toe boards and transmission cover plate for use with 743110 Firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
These corner patch panels are the perfect way to add strength to your existing inner trunk corners. This is a left hand 1955-1957 inner trunk wall corner patch.
These corner patch panels are the perfect way to add strength to your existing inner trunk corners. This is a right hand 1955-1957 inner trunk wall corner patch.
This is a rear trunk floor brace for all 1961-1964 Chevrolet full size passenger cars. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1955-1957 Chevrolet rear window to trunk panel brace for convertibles. This brace is "L" shaped and helps to support the rear window to trunk panel. Specify Right or Left when ordering.
This is a 1955-1957 Chevrolet rear window to trunk panel brace for convertibles. This brace is "L" shaped and helps to support the rear window to trunk panel. Specify Right or Left when ordering.
This is a left hand 1955 outer trunk to quarter panel filler. This is a partial filler pan, for a full version order RW-966L. It fits all models except the Nomads and wagons.
This is a left hand 1957 outer trunk to quarter panel filler. This is a partial panel filler. For a full panel version, order 729-68CL. The panel filler fits all models, except the Nomads and wagons.
This is a left hand 1956 outer trunk to quarter panel filler. This is a partial panel filler. The panel filler fits all models, except the Nomads and wagons.
This is a right hand 1956 outer trunk to quarter panel filler. This is a partial panel filler. The panel filler fits all models, except the Nomads and wagons.
This is a right hand 1955 outer trunk to quarter panel filler. Fills area between trunk lip and quarter panel to top of the tail lamp. This is a full panel filler. For a partial filler panel, order 727-68C. The full panel filler fits all models, except the Nomads and wagons.
This is a right hand 1955 outer trunk to quarter panel filler. Fills area between trunk lip and quarter panel to top of the tail lamp. This is a full panel filler. For a partial filler panel, order 727-68C. The full panel filler fits all models, except the Nomads and wagons.
This is a trunk lid outer skin for all 1955-1956 Chevrolet passenger cars (exc. Station Wagon). Stamped with holes for the lock cylinder and emblem. This part is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This 19 gauge sheet metal outer trunk lid is made as a replacement for your rusted or damaged original. The key hole & license plate mounting holes are pre-drilled on the trunk lid. The lid fit all 1957 Chevrolet passenger models except station wagons. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This trunk floor replacement panel fits 1955-1957 Chevrolet Hardtop, Sedan & Convertible models. The trunk floor repair panel serves as a direct replacement for the original. This panel eliminates the spare tire well. This part is oversize and must be sent via truck freight. Call or email us for a freight quote.
This is a trunk lid outer skin for all 1955-1957 Chevrolet passenger cars (exc. Station Wagon). Stamped without any holes for lock cylinder or emblem. This part is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This trunk floor replacement panel is complete with bracing welded together. It fits 1955-1957 Chevrolet Hardtop & Sedan. The trunk floor repair panel serves as a direct replacement for the original. This panel includes the spare tire well. This part is oversize and must be sent via truck freight. Call or email us for a freight quote.
This is a Complete Trunk Floor Panel with Braces for 1949-1952 Chevrolet passenger cars. This item must be shipped via Truck Freight. Call or email us for a freight quote.
This is a Complete Trunk Floor Panel with Braces for 1953-1954 Chevrolet passenger cars. This item must be shipped via Truck Freight. Call or email us for a freight quote.
This is a complete trunk floor assembly without an opening for the spare tire well. It fits all 1955-1957 Chevrolet passenger cars except Station Wagon & Sedan Delivery. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
REPAIR PANEL/BRACKET AT THE BOTTOM OF THE RUMBLE SEAT This item is oversize and special freight charges will apply. Call or email us for a freight quote.
1949-1952 CHEVROLET CAR HAVE 3 ROWS OF FLOOR BRACES IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN BODY STRUCTURE VIA THERE ATTACHMENT TO THE FLOOR PAN, INNER ROCKER AND THEN FRAME. THESE FLOOR BRACES ARE COMMON AREAS FOR RUST TO START, HIDDEN UNDER THE CAR, THEIR REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT OR REAR FLOOR PANS ARE REPLACED. DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.
This is a left hand 1955-57 rear body mount reinforcement. The mount is located near the rear of the body and will add strength and stability to the trunk floor where it mounts the body to the frame.
This is a right hand 1955-57 rear body mount reinforcement. The mount is located near the rear of the body and will add strength and stability to the trunk floor where it mounts the body to the frame.
THE 1949-52 CHEVROLET HAS A UNUSUAL DOOR POST REINFORCEMENT BRACE IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN DOOR POST STRUCTURE VIA THIS ATTACHMENT TO THE FLOOR PAN , INNER ROCKER, TOE BOARD, AND THEN BOLTED TO THE FRAME. THE DOOR POST BRACES ARE COMMON AREAS FOR RUST TO START, HIDDEN UNDER THE FLOOR-MAT. THERE REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT FLOOR PANS OR TOE BOARDS ARE REPLACED. IMPOSSIBLE TO FABRICATE, EMS AUTOMOTIVE HAS DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.
THE 1949-52 CHEVROLET HAS A UNUSUAL DOOR POST REINFORCEMENT BRACE IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN DOOR POST STRUCTURE VIA THIS ATTACHMENT TO THE FLOOR PAN , INNER ROCKER, TOE BOARD, AND THEN BOLTED TO THE FRAME. THE DOOR POST BRACES ARE COMMON AREAS FOR RUST TO START, HIDDEN UNDER THE FLOOR-MAT. THERE REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT FLOOR PANS OR TOE BOARDS ARE REPLACED. IMPOSSIBLE TO FABRICATE, EMS AUTOMOTIVE HAS DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.
This is a lower rear repair panel for the front fender on all 1953-1954 Chevrolet passenger cars. It is die-stamped in the USA out of 18 gage steel with all the correct shapes and curves. Specify Right or Left when ordering.
This is a lower rear repair panel for the front fender on all 1953-1954 Chevrolet passenger cars. It is die-stamped in the USA out of 18 gage steel with all the correct shapes and curves. Specify Right or Left when ordering.
THESE FLOOR BRACES ARE CONSTRUCTED FROM EXTRA HEAVY 16 GAGE STEEL. THE FLOOR BRACES ON THE 1953/54 CHEVROLET ARE THE MOST COMMON HIDDEN RUST AREAS. FORMED TO MATCH THE OEM STYLE SHAPES AND CURVES THEY FIT ALL BODY STYLES. MANUFACTURED IN THE USA
This is the 1955-57 rear trunk floor section. The floor piece has all of the correct indents, lines and configurations. This piece fits all models except the wagon models.