This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - LEFT - STAINLESS housing with STAINLESS RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
This is a complete LED Tail Light Assembly - STAINLESS with STAINLESS RIM & BLUE DOT - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 6-volt LED Conversion fits all 1931-1936 Chevrolet passenger cars This card comes with 56 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - STAINLESS with STAINLESS RIM, LED LENS WITH BLUE DOT. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
This LED conversion kit for original tail lights fits 1926-1930 Chevrolet Passenger cars & Trucks. These amazing conversions will make your old Chevy really visible from the rear! All new mounting bracket & instructions make installation easy and quick. Kits come with everything needed to change an original tail light to super bright LED! Each card features 52 Red LED's for stop, turn and tail light also 2 White LED's for the license light. Specify 6-Volt or 12-Volt when ordering. Proudly Made in the USA! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason. It's easy to see! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 4-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. Kits come with one LED card, fasteners, hardware and instructions needed to install the card into the tail light bucket. They will work with turn signal, tail light and stop light circuits.
For 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This LED conversion kit for original tail lights fits 1926-1930 Chevrolet Passenger cars & Trucks. These amazing conversions will make your old Chevy really visible from the rear! All new mounting bracket & instructions make installation easy and quick. Kits come with everything needed to change an original tail light to super bright LED! Each card features 52 Red LED's for stop, turn and tail light also 2 White LED's for the license light. Specify 6-Volt or 12-Volt when ordering. Proudly Made in the USA! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason. It's easy to see! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 4-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. Kits come with one LED card, fasteners, hardware and instructions needed to install the card into the tail light bucket. They will work with turn signal, tail light and stop light circuits.
For 1926 1927 1928 1929 1930 Chevrolet Cars and Trucks
This 6-volt LED Conversion fits all 1940-1953 Chevrolet & GMC Trucks. This card comes with 36 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and simple to follow instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 6-volt LED Conversion fits all 1937-1938 Chevrolet passenger cars This card comes with 36 Red LEDs for and 2 White LED's for license light. Red LED's are 5mm High Intensity bulbs for Stop, Tail & Turn signal. White LED's are 3mm High Intensity bulbs for the License Light. Cards are pre-wired for Stop Light, Tail Light and Turn Signal vehicles. Also included is hardware and simple to follow instructions for mounting the card into your original tail light housing. This high quality item is designed, assembled and tested in the USA! If using LED's on front and rear, be sure to order a load resistor as LED lights will not draw enough current to operate standard flashers.
This is a SEQUENTIAL LED Tail Light Assembly for 1973-1987 Chevrolet & GMC Fleetside trucks as well as 1973-1991 Suburbans, Blazers & Jimmys. Deluxe version with edge trim. This epoxy coated, fully sealed assembly features 56 super bright red LEDs and 12 white LEDs with a polycarbonate lens. The sequential operation selector switch allows for the sequential feature to toggle off or on with ease. When using this assembly it is recommended to upgrade to FS-250A under dash flasher. Please specify left or right when ordering. Replaces GM# 5968329, 5968330 Specific Applications: 1973-1987 CHEVROLET/GMC FLEETSIDE TRUCK 1973-1991 BLAZER/JIMMY/SUBURBAN
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is a SEQUENTIAL LED Tail Light Assembly for 1973-1987 Chevrolet & GMC Fleetside trucks as well as 1973-1991 Suburbans, Blazers & Jimmys. Deluxe version with edge trim. This epoxy coated, fully sealed assembly features 56 super bright red LEDs and 12 white LEDs with a polycarbonate lens. The sequential operation selector switch allows for the sequential feature to toggle off or on with ease. When using this assembly it is recommended to upgrade to FS-250A under dash flasher. Please specify left or right when ordering. Replaces GM# 5968329, 5968330 Specific Applications: 1973-1987 CHEVROLET/GMC FLEETSIDE TRUCK 1973-1991 BLAZER/JIMMY/SUBURBAN
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
These flush mounted LED Tail Light Assemblies fit 1941-1948 Chevrolet passenger cars or as a custom car feature on any vehicle. . Product Details: Complete taillamp assembly with very bright and visible LEDs for the stop, tail, and turn signal function. LEDs feature a wide viewing angle of 100 degrees as well as cool operation and long life. This lamp is designed to bolt into a 1941-48 Chevy in place of the original taillight. Surface mount design with no bucket. Great solution for cars with clearance problems (rumble seat or tire) or new installations. Requires drilling only three small holes in new installations. May be used with three or four wire connection (ground, taillight, stoplight, turnsignal). Includes RapidFire™ brake lights and modulated taillights for maximum vehicle visibility. 12 volt required. Construction: Includes stainless steel base plate, stainless steel studs, nuts, and washers, custom designed acrylic lens to maximize the LEDs visibility, lens has built-in reflector for lights off safety, stainless steel bezel, custom molded taillamp to body seal. Completely assembled in our Indiana factory. Installation Time: About 30 minutes. LEDs: 14 high intensity LEDs per lamp with 100 degree viewing angle and rugged four pin design. Kit Contents:(2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Complete CHROME LED Tail Light Assembly for 1933-1935 Chevrolet passenger cars. These beautiful tail light assemblies are from all new tooling. Each assembly comes with a chrome housing, 12 volt plastic LED lens, chrome rim, lens gasket, left side 12 volt license light bulb, chrome license light cover and cloth covered wiring. A show quality part you will be proud to have on your car! Replaces GM# 911493 Specify right or left when ordering. Specific Applications: 1933-1934 All Passenger - CA, CC, DA, DC; 1935 Standard Passenger - EC Black = Tail Light, Green = Stop Light, Ground is through housing
INCLUDES 2 FLUSH MOUNT ASSEMBLIES WITH LED ARRAYS, ELECTRICAL HARNESSES, CONNECTORS, NECESSARY BRACKETS, AND ATTACHING HARDWARE. ALSO INCLUDES CUSTOM MOLDED TAILLIGHT TO BODY GASKET.
THIS IS AN LED CONVERSION FOR 1959 CHEVROLET PASSENGER CARS, DOES NOT FIT STATION WAGON OR EL CAMINO * Each Light has 98 Red LEDs * Super bright red LED circuit board only to retrofit. * Precision cut to fit inside the original tail light lens. * Easy electrical connection with 1157 plug, no modification to vehicle. * Energy efficient solid-state circuit board engineered for 12V DC systems.
This is the left side tail light arm (fender mount) for 1933-1935 Chevrolet passenger cars. This arm can be used on the right side by cutting off the license plate tab that sticks up. NOTE: If this arm is used on the right side, the angle of the arm may need to be modified. Replaces GM# 370901. Specific Applications: 1933-1934 Passenger cars with fender mounted tail lights 1935 Standard Passenger cars with fender mounted tail lights.
This is the tail light bracket for all 1931 & 1932 Chevrolet passenger cars (Series AE & BA) on the RIGHT side. This bracket mounts on the right fender and does not have a license plate bracket. Replaces GM# 366834
This is the tail light and license plate bracket for all 1931 & 1932 Chevrolet passenger cars (Series AE & BA) on the LEFT side. This bracket mounts on the left fender. Replaces GM# 366833
This tail light lens & housing fits all 1973-1991 Chevrolet & GMC trucks. Also fits . This is a lens, WITHOUT trim on the edge. Specify right or left when ordering. Replaces GM# 5965771, 5965772, 5965775, 5965776, 2800121 Specific Applications: 1973-1987 Fleetside Pickups, Blazer, Jimmy & Suburban; 1988-1991 Suburban, Blazer & Jimmy 1988-1991 Crew Cab Pickup
This tail light lens & housing fits all 1973-1991 Chevrolet & GMC trucks. Also fits . This is a lens, WITHOUT trim on the edge. Specify right or left when ordering. Replaces GM# 5965771, 5965772, 5965775, 5965776 Specific Applications: 1973-1987 Fleetside Pickups, Blazer, Jimmy & Suburban; 1988-1991 Suburban, Blazer & Jimmy 1988-1991 Crew Cab Pickup
This tail light lens & housing fits all 1973-1991 Chevrolet & GMC trucks. Also fits . This is a lens, WITH chrome trim on the edge. Specify right or left when ordering. Replaces GM# 5965771, 5965772, 5968329, 5968330 Specific Applications: 1973-1987 Fleetside Pickups, Blazer, Jimmy & Suburban; 1988-1991 Suburban, Blazer & Jimmy 1988-1991 Crew Cab Pickup
This tail light lens & housing fits all 1973-1991 Chevrolet & GMC trucks. Also fits . This is a lens, WITH chrome trim on the edge. Specify right or left when ordering. Replaces GM# 5965771, 5965772, 5968329, 5968330 Specific Applications: 1973-1987 Fleetside Pickups, Blazer, Jimmy & Suburban; 1988-1991 Suburban, Blazer & Jimmy 1988-1991 Crew Cab Pickup
This complete LEFT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. This assembly comes ready for turn signals and with 12 volt bulbs. Specify right or left when ordering. Replaces GM# 927117, 927565.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. This assembly comes ready for turn signals and with 12 volt bulbs. Specify right or left when ordering. Replaces GM# 927117, 927565.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly for 1937-1938 Chevrolet passenger cars - RIGHT - BLACK with CHROME RIM. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger
This is a complete tail light assembly for 1940 Chevrolet passenger cars. It can be used on right or left side by reversing the lens. Unit comes with 304 stainless tail lamp rim, black housing with socket, glass lens and gasket, 12-volt bulb and mounting hardware. Replaces GM# 927067, 927068, 927069, 927070
This is an oval shaped RED Light that can be used for Stop, Turn Signal or Clearance Light applications. It comes with a 3-prong female plug adapter. The lens has 40 RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. Dimensions: 3-11/16" x 7-7/8"
This is a BLACK tail light assembly for 1954-1955 (1st Series) Chevrolet & GMC pickups. It fits left or right side and comes with a chrome rim and wiring. Replaces GM# 927645, 986907
This complete LEFT SIDE tail light assembly with Blue Dot lens fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Chrome rim with black housing. Replaces GM# 927565. Specify right or left when ordering. 12 volt with dual contact bulb.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete RIGHT SIDE tail light assembly with Blue Dot lens fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Chrome rim with black housing. Replaces GM# 927566. Specify right or left when ordering. 12 volt with dual contact bulb.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly with BLUE DOT GLASS LENS for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp)
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete tail light assembly for 1937-1938 Chevrolet passenger cars - RIGHT - BLACK with CHROME RIM - GLASS BLUE DOT LENS . Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger
This is a complete tail light assembly - BLACK with CHROME RIM with Glass Lens - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Comes with 6-volt bulbs, but easily changed to 12-volt by switching bulbs. This housing has a clear Glass license light lens. Replaces GM# 927074, 927874
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete tail light assembly - CHROME with CHROME RIM with Glass Lens - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Comes with 6-volt bulbs, but easily changed to 12-volt by switching bulbs. This housing has a clear Glass license light lens. Replaces GM# 927074, 927874
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete STAINLESS tail light assembly for 1955-1959 Chevrolet & GMC trucks. In 1955, used on 2nd Series only. Fits left or right side. Replaces GM# 898199, 899914
This is a complete tail light assembly with CHROME bezel for 1951-1952 Chevrolet passenger cars (exc Sedan Delivery). The assembly includes a glass lens and the stock round reflector mounted on the chrome bezel. It comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Fits Right or Left side. Replaces GM# 927883, 927884
This is a complete tail light assembly - BLACK with CHROME RIM with BLUE DOT Lens - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Comes with 12-volt bulbs, but easily changed to 6-volt by switching bulbs. This housing has a clear Glass license light lens. Replaces GM# 927074, 927874
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete tail light assembly with BLUE DOT LENS - BLACK with CHROME RIM - for the RIGHT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 985608, 986299
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete Tail Light Assembly for 1960-1966 Chevrolet Fleetside Pickups & G-10 Vans. The housing has the plastic lens with Bowtie, socket and wiring. Specify Right or Left when ordering. Replaces GM# 910493
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a complete Tail Light Assembly for 1960-1966 Chevrolet Fleetside Pickups & G-10 Vans. The housing has the plastic lens with Bowtie, socket and wiring. Specify Right or Left when ordering. Replaces GM# 910493
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a complete tail light assembly with STAINLESS bezel for 1949-1950 Chevrolet passenger cars. The lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. See BA-119 for original style 1949 flat tail light lens. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
This is a complete tail light assembly with STAINLESS bezel for 1949-1950 Chevrolet passenger cars. The lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. See BA-119 for original style 1949 flat tail light lens. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
This is a STAINLESS tail light assembly for 1954-1955 (1st Series) Chevrolet & GMC pickups. It fits left or right side and comes with a stainless rim and wiring. Replaces GM# 927645, 986907
This is a complete tail light assembly with BLUE DOT LENS - CHROME with CHROME RIM - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a Ford Teardrop Tail Light Assembly with LED card installed behind the red glass lens. The housing is powder coated Black for rust protection. Light is 12-volt and comes with 28 Super Bright LED's.
THIS ITEM DISCONTINUED BY OUR SUPPLIER - CLOSEOUT PRICING, SUBJECT TO STOCK ON HAND. This is a complete tail light assembly with CHROME bezel and BLUE DOT LENS for 1949-1950 Chevrolet passenger cars. The glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
This is a universal replacement tail light assembly for 1973-1987 Chevrolet & GMC stepside trucks. Left side has license light, right side has no license light. 3-1/4" diameter, mounting studs with 2" triangular pattern. Specify Right or Left when ordering. Replaces GM# 370868
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is a 1938-1939 Ford Teardrop RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. It comes with a #1157 plug adapter. The lens has 39 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. It has a die cast chrome plated bezel and mounts to a flat surface with 2 small studs.
This is a complete tail light assembly with BLUE DOT LENS and high grade stainless steel bezel for 1949-1950 Chevrolet passenger cars. The housing is gloss black powder coated. The red glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
This is a complete tail light assembly with BLUE DOT LENS and high grade stainless steel bezel for 1949-1950 Chevrolet passenger cars. The housing is gloss black powder coated. The red glass lens is correct for 1950 but works as a replacement for 1949. Comes with a 12 Volt bulb #1157 but is easily changed to 6-Volt by using #1154 bulb. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756
This is a universal replacement tail light assembly for 1973-1987 Chevrolet & GMC stepside trucks. Left side has license light, right side has no license light. 3-1/4" diameter, mounting studs with 2" triangular pattern. Specify Right or Left when ordering. Replaces GM# 370868
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in primer with a RED glass lens & chrome rim. Also available in LED & chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in CHROME with a red glass lens & chrome rim. Also available in LED & primer versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
This is a show quality reproduction of the 1934-1939 Chevrolet truck tail light assembly. Comes with the correct glass lens with Bowtie emblem etched into the glass. Fits left or right. Each light comes with two 6-volt bulbs installed. To use on 12-volt system, order 12 volt bulbs. Also available is LED Conversion for super bright tail lights. Order LED-31 in either 6-volt or 12-volt. This assembly will fit 1931-1932 Passenger cars & 1931-1933 Chevrolet trucks as a replacement light. Replaces GM# 916642, 916643
For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks
This is a SEQUENTIAL LED Tail Light Assembly for 1973-1987 Chevrolet & GMC Fleetside trucks as well as 1973-1991 Suburbans, Blazers & Jimmys. This epoxy coated, fully sealed assembly features 56 super bright red LEDs and 12 white LEDs with a polycarbonate lens. The sequential operation selector switch allows for the sequential feature to toggle off or on with ease. When using this assembly it is recommended to upgrade to FS-250A under dash flasher. Please specify left or right when ordering. Replaces GM# 5965775, 5965776 Specific Applications: 1973-1987 CHEVROLET/GMC FLEETSIDE TRUCK 1973-1991 BLAZER/JIMMY/SUBURBAN
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is a SEQUENTIAL LED Tail Light Assembly for 1973-1987 Chevrolet & GMC Fleetside trucks as well as 1973-1991 Suburbans, Blazers & Jimmys. This epoxy coated, fully sealed assembly features 56 super bright red LEDs and 12 white LEDs with a polycarbonate lens. The sequential operation selector switch allows for the sequential feature to toggle off or on with ease. When using this assembly it is recommended to upgrade to FS-250A under dash flasher. Please specify left or right when ordering. Replaces GM# 5965775, 5965776 Specific Applications: 1973-1987 CHEVROLET/GMC FLEETSIDE TRUCK 1973-1991 BLAZER/JIMMY/SUBURBAN
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
Fits all 1954 Chevrolet passenger cars (also fits 1953 cars as a custom feature item). This complete tail light assembly includes Chrome Bezel, All Lenses, Gaskets, and Backing Plate also includes Tail Light Socket & Backup Light Socket with 12 Volt Bulbs, Mounting Hardware and Body Seal. Fits Left or Right Side. Replaces GM# 897627
These new reproduction tail light assemblies fit all 1955-1959 Chevrolet & GMC panel trucks & Suburbans. They come complete with chrome housings, light sockets, 12 volt bulbs and lens gaskets. Sold in pairs. Replaces GM#'s 897821, 879822, 898669, 898670.
This taillight assembly fits all 1931-1932 Chevrolet passenger cars and can be used on trucks. The bucket and rim are chrome. Order lens and light bulbs separately. Our reproduction is truly show quality and actually fits together (unlike other units on the market). Don't be fooled by a cheap price! This light is high quality and with a fit to match the original. MADE IN THE USA!! Replaces GM# 363149 We offer the correct original plastic lens with Chevy Bowtie emblem - BA-20P. Also available is a plain glass replacement lens - BA-20. We do not recommend the glass lens as the fit is not good, but it is an economy option. Just be aware that fit issues with glass lenses exist. Consider the very popular LED conversion for this tail light. It is available in both 6-volt or 12-volt versions. The light bulbs required are: FS-23(6-volt) or FS-23A (12 volt) for the license light; FS-22 (6 volt) or FS-22A (12 volt) for the stop light. INSTALLATION INSTRUCTIONS: This tail light bucket uses a modern socket assembly that is different from the original setup. On original 6-volt systems, using #1129 stop light, the bulb will be too close to the lens and may damage original plastic lenses. To prevent this, simply bend the stop light socket downward about 20-25 degrees. In order to install bulbs, you must remove the screw holding the sockets in place. Do this after bending the stop light socket. After installing bulbs, check for fit. The stop light bulb will be against the housing, but this will not be a problem. You should end up with about 1/2" clearance between the bulb and the lens. This is only critical when using the original plastic lenses. The license light bulb installs like the original. First, install the small rubber grommet around the round opening. The stop light bulb should press against this grommet. If you are installing glass lenses on this bucket, be aware that these tail lights (just like the originals) were designed for a plastic lens. The additional thickness may require longer screws for installation. Please Note: Use of a glass lens with this tail light will create fit problems with the lens, tail light rim and bucket. Plastic lenses are recommended with this application.
This complete Polished Stainless Steel Tail Light Assembly fits 1957 Chevrolet Passenger vehicles and includes a pre-installed 1157 bulb as well as 1/4-20 studs for easy installation. Specify left or right when ordering. Specific Applications: 1957 Chevrolet Bel Air/210/150 Models
This complete Polished Stainless Steel Tail Light Assembly fits 1957 Chevrolet Passenger vehicles and includes a pre-installed 1157 bulb as well as 1/4-20 studs for easy installation. Specify left or right when ordering. Specific Applications: 1957 Chevrolet Bel Air/210/150 Models
This beautiful tail light assembly fits all 1954 Chevrolet passenger cars (will fit 1953 cars as a custom feature). Assembly is complete with Chrome Bezel, All Lenses, Gaksets, and Backing Plate Includes 40 LED Red Tail Lamp Lens & 28 LED Backup Lens 12 Volt - Includes Tail Light Socket & Backup Light Socket Mounting Hardware and Body Seal Included, Fits R/H & L/H Side Epoxy Coated, Fully Sealed Electronics. Replaces GM# 897627
This is a complete set of 6 aluminum housings for 1960 Impala. Also included are 4 tail light lenses and 2 backup light lenses with gaskets. Sold in sets only.
This is a Chrome Plated Set of Tail Light Assemblies for 1956 Chevrolet passenger cars. The chrome plating is the highest quality and these are Made in the USA! You won't be disappointed!
This is a CHROME tail light rim for 1937-1953 Chevrolet & GMC cars & trucks. Fits left or right side. Replaces GM# 5942056 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a chrome tail light rim (bezel) for 1939-1955 Chevrolet cars & trucks. Replaces GM# 923322. Specific Applications: 1939 All Passenger Cars; 1940-1948 Sedan Delivery (with dual tail lights); 1947-1955 (1st Series) Panel Trucks & Suburban (with dual high mounted tail lights); 1949-1952 Station Wagon (with dual tail lights)
This chrome tail light bezel (rim) fits all 1941-1948 Chevrolet passenger cars (exc. Station Wagon or Sedan Delivery). Dimensions: 2-7/16 x 5-7/8" overall. Replaces GM# 5931381
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars