This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
These vent window latch assemblies fits 1955-1957 Chevrolet Passenger vehicles. Sold as a pair for left and right. Comes with rivets. Will not fit convertible models.
This upper Door Window Regulator Guide fits 1947-1950 Chevrolet and GMC trucks. This is the cam track that bolts below the window sash. Sold each. Fits left or right.
These 1955-57 windlace retainers hold the windlace at the front door "A" pillar. They are zinc plated for extra protection against corrosion. Sold in pairs only.
Snap-over type - 3/4" diameter x 5/16" thick. Six per car. Convertibles only. Set of 4 per vehicle. 1955-57 (except Sedan and wagon) upper window stop.
This felt pushes over the large rivet at the end of the regulator arm. It rides in the sash guide. 1 pair required per regulator. Replaces original leather pieces. Made in the USA!
For 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars and Trucks
This window regulator repair kit is for 1939-1946 Chevrolet & GMC Trucks. One kit per window. Kits include: handle shaft, pivot gear, retainer housing and rivets.
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a window regulator repair kit for 1927-1928 Chevrolet passenger cars. Kits come with a new square-end handle shaft, gear tooth, retainer housing and rivets to repair one regulator.
This is a window regulator repair kit for 1929-1930 Chevrolet passenger cars. Kits come with a new splined shaft, gear tooth, retainer housing and rivets to repair one regulator.
This is a window regulator repair kit for 1931-1932 Chevrolet passenger cars. Kits come with a new splined shaft, gear tooth, retainer housing and rivets to repair one regulator.
This is an 5 ft. flexible stainless beaded window channel for sides and top of door windows in 1933-1960 Chevrolet passenger cars. Dimensions - 5/8 wide x 9/16 overall height. Exact replacement. Most closed models. Replaces GM# 4045914 THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO OVERSIZED SHIPPING.
This is an 8 ft. flexible stainless beaded window channel for sides and top of door windows in 1933-1960 Chevrolet passenger cars. Dimensions - 5/8 wide x 9/16 overall height. Exact replacement. Most closed models. Replaces GM# 4075477 THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO OVERSIZED SHIPPING.
This is the Lower Vent Window Post Channel for 1933-1960 Chevrolet Passenger Cars. This channel has no beading because it is down inside the door and is not seen. The channel is 1/2" deep x 1/2" wide x 15" long. It is designed to drop into the original vent window post and be riveted or glued in place. NOTE: 1940 Models may have a narrow channel that will not accept this replacement piece. If so, contact us and we can send CV-73, which is slightly narrower.
UPPER Vent Window Division Bar Channel for 1933-1960 Chevrolet passenger cars. Stainless beaded edge - mohair-lined. Exact replacement for rear side UPPER section of the vent window division bar. Fastens in place by small screws or rivets - top and bottom. Must be cut to length.