72 Items Found
Convertible Top Bumpers
1946-50 Mounting cushion, hydraulic pump. Used on models with hydraulic convertible top. Two (2) to three (3) required per car. Replaces #4149788. Convertibles only.
For 1946 1947 1948 1949 1950 Chevrolet Cars
Cements to original metal core. One or two pair per car required as follows: 1941-48: Top of folding pillar into groove roof rail - rear. 1941-52: Folding post rest on female post rest on female hinge of folding top.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
1953-57 Bumper, folding top, side roof rail slat iron. Replaces #4615046. Steel core as original. Two (2) or four (4) per car as required for front and center. All convertibles
For 1953 1954 1955 1956 1957 Chevrolet Cars
1949-52 Bumper, folding top rear bow in top compartment. Replaces #4565772. Two (2) required per car. Steel core as original. All convertibles.
For 1949 1950 1951 1952 Chevrolet Cars
1941-48 Pad, top folding post. Fastens on lower end of post with two (2) screws. Metal core. Close copy. Convertible coupes
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1942-48 Pad, convertible top folding post. Fastens on lower end with 2 screws. Replaces #4134969. Metal core. Cabriolets.
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1950-52 Pad, convertible top rest. Full molded with metal core. Replaces #4579174-5. Used on convertibles.
For 1950 1951 1952 Chevrolet Cars
1937-38 Pads for bottom of folding post or body. Steel core as original. Screw held in place. Convertibles.
For 1937 1938 Chevrolet Cars
1940 Pads, folding post. Replaces #4101880 (molded as H72069). Steel core. Good copy. All convertibles.
For 1940 Chevrolet Cars
1950 Bumper/Cap, Convertible Folding Pillar to Side Roof Rail Link. Excellent copy made out of gray rubber. Replaces #4662358. Four (4) piece set only. A faithful copy of the original part. Made in the USA by Steele Rubber Products, Inc.
For 1950 Chevrolet Cars
Convertible Top Grommets
1951-75 Grommet, folding top hydraulic pump mount. Special design to hold pump mounting bracket to floor pan. Replaces #3698109. Four (4) needed per car for all convertibles
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 Chevrolet Cars
1946-61 Spacer. Folding top power cylinder support. Four (4) used per car. Replaces #4149726 1946-61: All convertibles. 1957-61: Corvette convertibles
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars
Convertible Top Seals
1932-1935 Roadster & Phaeton Windshield Header Seal (May fit 1931 also) Fine grain sponge rubber. A replacement seal, this is sold by the foot. Fits Roadster & Phaeton convertible tops only. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1931 1932 1933 1934 1935 Chevrolet Cars
This is the side roof rail weather strip for 1933-1941 Chevrolet Convertibles. Will other GM Makes like Buick, Cadillac, Pontiac, Oldsmobile, Oakland & Durant. It fits into metal channel retainer. See 70-1172 for cloth covering. This is the original type roof rail weather strip used on all GM convertibles for these years. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 Chevrolet Cars
1931-1932 Front Bow Seal Weatherstrip, windshield header-to-front-roof rail. Fine grain sponge rubber. A replacement seal, requires minor trimming to install. Replaces #4009225. Cabriolets and Landau Phaetons - Styles 568 and 571. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1931 1932 Chevrolet Cars
This convertible top rubber seal is used on 1931-1932 Chevrolet Cabriolet & Landau Phaeton models. It is a dense rubber located around the upper window openings to seal against the door window when it is raised. The "T" shaped rubber replaces the original, however, it does NOT have a metal core. The original pieces had metal core insert so it could be screwed in place. Sold by the foot, as needed. Probably used on other GM makes from 1930-1932. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1930 1931 1932 Chevrolet Cars
This convertible top to front bow seal fits all 1955-1957 Chevrolet convertibles. Fits the front bow to windshield, rear center section. Top quality sponge as original. Approximately forty six (46) inch strip for one car. Replaces GM# 4211195.
For 1955 1956 1957 Chevrolet Cars
This is the convertible top front bow-to-windshield outer seal that fits all 1955-1957 Chevrolet Convertibles. Extruded section of exact profile. Approximately four (4) foot nine (9) inches long. One (1) strip per car. Replaces GM# 4650077
For 1955 1956 1957 Chevrolet Cars
1955-57 Seal, roof rail, outer at 1/4 window. Replaces #4650269 & 4650270. Fits Sport Coupes.
For 1955 1956 1957 Chevrolet Cars
1955-57 Filler, side roof rail. Front corner just in front of flipper seal. Replaces #4659971-72. Right and left. Solid brass core with molded screw holes. Sport Coupes.
For 1955 1956 1957 Chevrolet Cars
13/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
3/4" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
3/4" Wide x 3/4" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 5/8" Tall.
For All Chevrolet Cars and Trucks
15/16" Wide x 11/16" Tall.
For All Chevrolet Cars and Trucks
13/16" Wide x 27/32" Tall.
For All Chevrolet Cars and Trucks
1" Wide x 7/8" Tall.
For All Chevrolet Cars and Trucks
1941-48 Weatherstrip and pad, front bow-to-windshield, inner. Replaces #4084234 & #4114973. Approx. 4 ft-10 inch strip for one car. All convertibles.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1 1/8" Wide x 7/8" Tall.
For All Chevrolet Cars and Trucks
1 1/4" Wide x 3/4" Tall.
For All Chevrolet Cars and Trucks
1940-52 Weatherstrip, front bow-to-windshield, outer. Correct style to be attached to your original metal strip. Replaces #4563765 & 4563766 and other #s. (The metal strips changed in 49 but the rubber cross-section remained the same.) Approx. 4 ft-10 in long. All convertibles.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
1958 Close cell sponge w/clips. Two ea. 38 long. Impala except convertible
For 1958 Chevrolet Cars
1949-52 Filler, folding top front roof rail to side roof rail. Replaces #4564058-59. All convertibles.
For 1949 1950 1951 1952 Chevrolet Cars
1952 Weather-strip, roof rail at hinge pillar. Replaces #4616479-80 for Bel Air.
For 1952 Chevrolet Cars
1941-48 Rubber fillers, side roof rail to front roof rail at front corners. Right and left. Replaces #4115405-6. Metal core, threaded for original screws. Convertible coupes.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1937-38 Weatherstrip, front bow-to-windshield, inner, right and left. Convertible.
For 1937 1938 Chevrolet Cars
1937-38 Weatherstrip, front bow-to-windshield, outer, right and left. Molded with end hook, screw holes and clearances. Convertibles.
For 1937 1938 Chevrolet Cars
1965 W/molded ends. Impala 2-door hardtop.
For 1965 Chevrolet Cars
1962-64 Chevrolet Impala Sport Coupe. With molded ends. Replaces #4871258 & 4871259.
For 1963 1964 Chevrolet Cars
1936 Seal, convertible top front bow-to-windshield with integral end pads. Made to fit Cadillac convertibles but can be adapted to other GM convertibles.
For 1936 Chevrolet Cars
1965-66 With molded ends. Replaces #7647766-7. Full-size Sport Sedans only
For 1965 1966 Chevrolet Cars
1931-35 Weatherstrip, front bow to-windshield. Soft rubber, hollow body, proper screw holes, hinged flaps front and back. 1931: Landau Phaeton 1932-35: Most convertibles.
For 1931 1932 1933 1934 1935 Chevrolet Cars
1961-62 with molded ends. Full-size hardtop Coupes except 62 Impala.
For 1961 1962 Chevrolet Cars
1961-62 With molded ends. All full-size hardtop sedans With molded ends. All full-size hardtop sedans
For 1961 1962 Chevrolet Cars
With molded ends. 1963-64 Chevrolet Impala Sport Sedan 4-door hardtop.
For 1963 1964 Chevrolet Cars
With molded ends. Full-size Impala HT coupes
For 1963 Chevrolet Cars
1958 Sport sedan 4-door hardtop
For 1958 Chevrolet Cars
1959-60 Replaces #4783153 & 4783154. Four (4) pc. set incl. right and left molded section for body hinge pillar and r. & l. sponge strips with inserted clips for over door and rear quarter window. Sport Coupe.
For 1959 1960 Chevrolet Cars
1959-60 Sport Sedan 4-door hardtop ROOF RAIL RUBBERS
For 1959 1960 Chevrolet Cars
Fits metal retainer. Six piece set for one car. For windshield post weather-strip see 60-84 in next section. For cloth covering see 70-1172.
For 1949 1950 1951 1952 Chevrolet Cars
1942-48 Convertible. Eight piece set for right and left sides including windshield post strip rubber only. Sold in full sets only. See 70-1172 for cloth covering.
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1950-51 With attached hinge pillar strip. Bel-Air 1037, second type used in 50 and all of 51. Stops at front window CAUTION: THERE ARE TWO VERSIONS OF THIS PART. THIS ONE STOPS AT FRONT WINDOW-COMPARE TO 60-272
For 1950 1951 Chevrolet Cars
This is a 9 piece set for 1953-1954 Chevrolet Convertible Top Seals. Set includes all seals for the folding top, including front bow weatherstrip that seals the convertible top to the windshield header. Cloth covering sold separately - see 70-1172.
For 1953 1954 Chevrolet Cars
1961-64 Full-size With metal core and studs. Perfect, correct detail.
For 1961 1962 1963 1964 Chevrolet Cars
1959-60 Impala Front bow and roof rail with metal core and studs.
For 1959 1960 Chevrolet Cars
1950 With attached hinge pillar strip. Bel-Air, 1st type, style 1037. Continues over rear window. CAUTION: THERE ARE TWO VERSIONS OF THIS PART. THIS CONTINUES OVER THE REAR WINDOW-COMPARE TO 60-274
For 1950 Chevrolet Cars
1955-57 (8) pieces Convertible Right/left. Folding top side roof rail.
For 1955 1956 1957 Chevrolet Cars
Quarter Drain Stop Bumper
Removable Top Seal
This is the Outer Windshield Header Seal for 1973-1975 Blazer & Jimmy. Specific Applications: 1973-1974 Chevrolet Blazer; 1973-1975 GMC Jimmy
For 1973 1974 1975 Chevrolet Trucks
This is the Outer Header Seal for 1976-1991 Chevrolet Blazer & GMC Jimmy. Mounts on the front of the shell with weatherstrip adhesive glue (not included) and presses against the cab weatherstrip. This single piece is for the double wall models. It's made from high quality ozone resistant EPDM rubber from the original specifications. Specific Applications: 1976 - 1986 Chevrolet - K5 Blazer 1976 - 1991 GMC - Jimmy 1987 - 1991 Chevrolet - Blazer
For 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This is the Inner Header Seal for 1976-1991 Chevrolet Blazer & GMC Jimmy. Mounts on the rear of the cab with weatherstrip adhesive glue (not included) and presses against the shell weatherstrip. This is sold as a single piece. It's made from high quality ozone resistant EPDM rubber from the original specifications. Specific Applications: 1976 - 1986 Chevrolet - K5 Blazer 1976 - 1991 GMC - Jimmy 1987 - 1991 Chevrolet - Blazer
For 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This is the UPPER Tailgate Glass Seal for 1976-1991 Chevrolet & GMC Blazer or Jimmy. The glass run channel simply presses into the channel in the rear of the shell, the glass then rolls up into this piece. Our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle.
For 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 Chevrolet Trucks
This is a Pair of Roof Side Weatherstrips for 1973-1975 Blazer & Jimmy. Mounts on the driver and passenger side body rail of the shell with weatherstrip adhesive glue (not included). They are sold as a pair and made from high quality ozone resistant EPDM rubber using the original specs.
For 1973 1974 1975 Chevrolet Trucks
This is the Tailgate Glass Window Channel for 1973-1975 Chevrolet Blazer & GMC Jimmy. The glass run simply presses into the channel in the rear of the shell, the glass then rolls up into this piece. Protect your vehicles interior from the outside elements and reduce noise level while driving simply by replacing your dried-out or cracked door weatherstrip with a proven product thats accepted in the industry. Made from the OEM specs to install and fit for an authentic appearance. Specific Applications: 1973 - 1974 Chevrolet - Blazer 1973 - 1975 GMC - Jimmy 1975 - 1975 Chevrolet - K5 Blazer
For 1973 1974 1975 Chevrolet Trucks
Roof Header Weatherstrip
This is the Outer Windshield Header Seal for 1969-1972 Blazer & Jimmy. Mounts on the front of the shell with weatherstrip adhesive glue (not included) and presses against the cab weatherstrip. This single piece is for the double wall models. It's made from high quality ozone resistant EPDM rubber from the original specs. Specific Applications: 1969-1972 Chevrolet Blazer; 1970-1972 GMC Jimmy
For 1969 1970 1971 1972 Chevrolet Trucks
Roof Side Body Seal
1969-72 BLAZER ROOF SEAL-SINGLE-LF
For 1969 1970 1971 1972 Chevrolet Trucks
1969-72 BLAZER ROOF SEAL-SINGLE-RT
For 1969 1970 1971 1972 Chevrolet Trucks
DOUBLE WALL CONSTRUCTION
For 1969 1970 1971 1972 Chevrolet Trucks
Roof Water Deflector
BLAZER ROOF PANEL WATER DEFL.
For 1969 1970 1971 1972 Chevrolet Trucks
72 Items Found