18 Items Found
Passenger Floor Mats
This is a Rubber Front Floor Mat for 1937-1939 Chevrolet Passenger cars - DRIVER QUALITY. It has the Fisher Body emblem in it and a small Chevy Bowtie. Dimensions: FRONT WIDTH = 37-1/2"; BACK WIDTH = 46"; FRONT TO BACK LENGTH = 32-1/4". NOTE: This mat has a hump in the center. The mat does not have any cut outs in it, so it may be able to be modified for other years. Made in the USA! Replaces GM# 4083666, 4083667, 4092712, 4092713 NOTE: THIS IS NOT A FIRST QUALITY MAT. THE MOLD FOR THE MAT IS VERY OLD AND HAS CRACKS IN IT. THIS CAUSES LINES TO SHOW UP IN THE SURFACE OF THE MAT. THESE ARE NOT CRACKS BUT AREAS WHERE THE MOLD ITSELF IS CRACKED. THERE ARE NO OTHER MATS AVAILABLE. SEE CLOSE-UP IMAGE.
For 1937 1938 1939 Chevrolet Cars
This is a reproduction of the original style rubber DRIVER QUALITY Front Floor Mat for 1929-1932 Chevrolet closed cars. The mat has the Bowtie emblem pattern with the Fisher Body Emblem in the center. It is UNCUT and must be trimmed to fit 1927-1928 Chevy passenger cars and 1929-1932 Roadster & Phaeton. Dimensions: 42" Long x 43" Wide - TRIM TO FIT. NOTE: THIS IS NOT A FIRST QUALITY MAT. THE MOLD FOR THE MAT IS VERY OLD AND HAS CRACKS IN IT. THIS CAUSES LINES TO SHOW UP IN THE SURFACE OF THE MAT. THESE ARE NOT CRACKS BUT AREAS WHERE THE MOLD ITSELF IS CRACKED. THERE ARE NO OTHER MATS AVAILABLE. SEE CLOSE-UP IMAGE.
For 1927 1928 Chevrolet Cars
This is a reproduction of the original rubber DRIVER QUALITY Front Floor Mat for 1929-1932 Chevrolet closed cars, including Landau Phaeton & Sedan Delivery. The mat has the Bowtie emblem pattern with the Fisher Body Emblem in the center. Not used for open cars: Roadster or Phaeton. Pre-punched for clutch, brake, steering column, accelerator, starter, and foot rest. Dimensions: 33-1/4" Wide at front; 39-1/2" Wide at rear; 30-3/16" Overall Length, front to rear. Replaces GM# 4101217, 4003054, 4006286, 4025596, 604554 NOTE: There is no reproduction of the open car floor mat but the 1927-1928 Mat M-12 can be used as it is uncut and must be trimmed down. This mat also has the Fisher Body emblem which is not correct for open cars. NOTE: THIS IS NOT A FIRST QUALITY MAT. THE MOLD FOR THE MAT IS VERY OLD AND HAS CRACKS IN IT. THIS CAUSES LINES TO SHOW UP IN THE SURFACE OF THE MAT. THESE ARE NOT CRACKS BUT AREAS WHERE THE MOLD ITSELF IS CRACKED. THERE ARE NO OTHER MATS AVAILABLE. SEE CLOSE-UP IMAGE.
For 1929 1930 1931 1932 Chevrolet Cars
This is a Replacement Rubber Floor Mat for 1949-1954 Chevrolet & Pontiac passenger cars. Dimensions: 34 1/4" X 63". This is a molded mat that is made to fit the contours of the original floor and cover both sides of the front floor. A quality mat Made in the USA! Replaces GM# 4618147, 4567665, 3699176, 4618827, 4636644
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
1941-1948 Chevrolet Passenger Front Floor Mat. This is a taupe colored (brown) rubber mat that comes with an attached jute backing and two carpet inserts molded into the rubber mat. A beautiful reproduction that you will be proud to put into your restored car. Dimensions: Front 42-1/2" Wide; Back 56-1/4" Wide; Front to Back 36-1/2" Long Carpet insert is 2-3/4" from Left edge. Carpet insert is 1-3/4" from Right edge. Made in the USA! Replaces GM# 4133494
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Truck Floor Mats
NO CURRENT SOURCE 06/13/11
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
Replacement.
For 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 Chevrolet Trucks
No shifter cut out. All except 4x4.
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
NO CURRENT SOURCE 06/13/11
For 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is a Heavy Black Rubber Floor Mat for 1947-1955 (1st Series) Chevrolet & GMC trucks (exc. COE). Mat will work for both 3-speed and 4-speed models. For 4-speed cut out for shift tower. Mat comes die cut for clutch & brake pedals, accelerator pedal, dimmer switch and steering column. High quality - Best on the Market! Replaces GM# 3695053, 3695051, 3698173, 3698181, 3698177, 3698175, 3709659 Dimensions: Width at Top: 54-1/4"; Width in Middle: 54"; Width at Bottom: 55"; Overall Height: 34-1/4".
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a Heavy Black Rubber Floor Mat for 1955-1959 (2nd Series) Chevrolet & GMC trucks with 3-Speed or Hydramatic. Dimensions: 34" front to back; 52-3/8" wide at the firewall; 63" mid way at the widest point; 58" wide at the back. High quality - Best on the Market! Replaces GM# 3737401, 3749145, 3788799 Specific Applications: 1955-1959 (2nd Series) Chevrolet & GMC Trucks (exc. 4-speed)
For 1955 1956 1957 1958 1959 Chevrolet Trucks
This High Quality Rubber Floor Mat fits all 1941-1946 Chevrolet & GMC trucks with conventional cabs. For 1937-1940 Trucks, it requires trimming to fit. This replacement fits the original floor. The markings on the back side show where the holes can be added if you are creating an original truck with floor shift. Add your own holes if the truck is to be modified or use as is. Fits 3 or 4 speed transmissions. Replaces GM#'s 3681259, 3681271, 3681457. Dimensions: Width at Top: 41"; Width in Middle: 41-3/4"; Width at Bottom: 46-1/4"; Overall Height: 35-3/8".
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
In 1955, used on 1st Series Only.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a Rubber Floor Mat for 1967-1972 Chevrolet & GMC trucks with Large Floor. The mat comes with tails that go along the side of the seat, as was original. Large floor models were 4-Speed transmission or 4X4 trucks. Replaces GM# 3948427
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Rubber Floor Mat for 1967-1972 Chevrolet & GMC Trucks with SMALL Floor - 3-speed or Automatic transmission. Mat is an OEM style with tails on either side of the the seat. Order SA-58 Backing separately.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
18 Items Found