FAX: (541) 258-6968
 
21 Items Found
Drive Gear Bushings
Chevrolet Parts -  1925-53 COUNTERSHAFT/REVERSE IDLER BUSHING
FS-313
$6.50 EA
CHEVROLET 1925-53 COUNTERSHAFT/REVERSE IDLER BUSHING
This transmission reverse idler and countershaft bushing fits 1925-1953 Chevrolet cars & trucks. This bushing is very often worn badly. Check whenever rebuilding your transmission. Replaces GM #590236. Specific Applications: 1929-1947 Chevrolet trucks with 4-speed transmission reverse idler gear bushing. Dimensions: OD = 1.003" X ID .878" X OL 1.50 "

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-68 CAR/PU W/3-SPEED, REAR TRANS. BUSHING
GR-572
$6.50 EA
CHEVROLET 1955-68 CAR/PU W/3-SPEED, REAR TRANS. BUSHING
This bushing is very often worn badly. Check whenever rebuilding your transmission. This bushing keeps the front yoke of the U-joint tight. Originally, GM did not service this part as a bushing only, but made you purchase the entire rear casting. Dimensions: 1.630" OD, 1.512" ID, .930 Wide

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 Chevrolet Cars and Trucks


Chevrolet Parts -  1925-31 TRANS MAIN DRIVE BUSHING
FS-183
$24.50 EA
CHEVROLET 1925-31 TRANS MAIN DRIVE BUSHING
For 3-speed transmissions. This bushing is very often worn badly. When installing new bushing, be sure to line up the oil groove in bushing with the oil feed hole in gear.After installation of the bushing, drill a hole for oil feed, using the existing hole in the gear as a guide.

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1948-54 CAR/PU REAR TRANS. BUSHING
AF-257
$35.00 EA
CHEVROLET 1948-54 CAR/PU REAR TRANS. BUSHING
This rear transmission bushing fits 1948-1954 Chevrolet passenger cars & Chevy & GMC trucks with 3-Speed transmissions. It is often worn badly. Check it whenever rebuilding your transmission. If the clearance exceeds .010", the bushing should be replaced. This bushing keeps the front yoke of the U-joint tight and prevents vibration. Originally, GM did not service this part as a bushing only, but required that you purchase the entire rear casting. This part is precision machined in brass. Dimensions: 1.565" OD X 1.445" ID X .083" THICK X .885" WIDE. Proudly Made in the USA!! Specific Applications: 1949-1954 Chevrolet Passenger cars with 3-Speed Transmission

For 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Main Drive Gear Bearings
Chevrolet Parts -  1925-31 TRANS MAIN DRIVE BEARING
FS-184
$19.50 EA
CHEVROLET 1925-31 TRANS MAIN DRIVE BEARING
This is a Transmission Main Drive Bearing for 1925-1931 Chevrolet 3-speed transmissions. The bearing is double sealed and the inner seal should be removed before installation. The outer seal will help prevent leaks. Bearing OD 2.834" Also used for Front Propeller Shaft Bearing on 1929-1940 3/4, 1 & 1-1/2 Ton Trucks - Models L, M, N, O, P, Q, R, GD, GE, S, HD, HE, T, JD, JE, V (exc. VE, VF), KD, KE, KF, W (exc WD) Replaces GM# 903207, ND 3207

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1932-36 TRANS. MAINSHAFT PILOT BEARING
B-38
$21.50 EA
CHEVROLET 1932-36 TRANS. MAINSHAFT PILOT BEARING
Transmission main shaft pilot bearing for all 1932-1936 Master Chevrolet cars & trucks with Syncromesh 3-speed transmissions. Replaces GM# 142638, Hyatt 93322

For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1932-36 TRANS MAIN DRIVE BEARING
FS-264
$39.95 EA
CHEVROLET 1932-36 TRANS MAIN DRIVE BEARING
Transmission main drive gear bearing for all 1932-1936 Master Chevrolet cars & trucks with 3-speed transmissions. Replaces GM# 590545 and ND 3208 bearings.

For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STD TRANS. MAINSHAFT PILOT BEARING
B-12
$45.00 EA
CHEVROLET 1933-36 STD TRANS. MAINSHAFT PILOT BEARING
This is a transmission main shaft pilot bearing for 1933-1936 Chevrolet Standard passenger cars - Models CC, DC, EC, FC. Replaces GM# 136312, Hyatt 99014

For 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-1936 STD 3-SPD MAIN DRIVE GEAR BEARING
B-11
$69.95 EA
CHEVROLET 1933-1936 STD 3-SPD MAIN DRIVE GEAR BEARING
This is a Transmission Main Drive Gear Bearing for 1933-1936 Chevrolet Standard Passenger Cars. This is a shielded bearing on one side and open on the other. Dimensions: ID - 1.575"; OD 2.834"; Thick .628". Bearing has a groove for snap ring. Replaces GM# 954111, ND 47106 Specific Applications:1933-1936 Standard Passenger Cars - Models CC, DC, EC, FC - with 3-Speed Transmission

For 1933 1934 1935 1936 Chevrolet Cars and Trucks

Main Shaft Rear Bearings
Chevrolet Parts -  1932-36 MAINSHAFT & FREEWHEELING BEARING
FS-266
$9.95 EA
CHEVROLET 1932-36 MAINSHAFT & FREEWHEELING BEARING
Transmission bearing for Chevrolet cars & pickups with 3-speed transmissions. Fits 1932-1936 Rear Main Drive Gear and 1932-1933 Freewheeling Rear Bearing. Replaces GM# 907506 & ND 7506.

For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1925-31 TRANS MAIN SHAFT REAR  BEARING
FS-204
$21.50 EA
CHEVROLET 1925-31 TRANS MAIN SHAFT REAR BEARING
This is a Transmission Rear Bearing for 1925-1931 Chevrolet 3-speed transmissions & 1929-1931 1-1/2 Ton Trucks 4-Speed Main Shaft Rear Bearing. The bearing is double sealed and the inner seal should be removed before installation. The outer seal will help prevent leaks. Dimensions: Bearing OD 2.825". NOTE: THIS BEARING SITS IN A METAL REMOVABLE SLEEVE. THE SLEEVE MUST BE REUSED. OD OF BEARING AND SLEEVE IS ROUGHLY 2.880". Replaces GM# 903306, ND 3306

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1941-1954 TRUCK DRIVESHAFT CARRIER BEARING
B-49
$32.95 EA
CHEVROLET 1941-1954 TRUCK DRIVESHAFT CARRIER BEARING
This is a drive shaft center carrier bearing for 1941-1954 Chevrolet & GMC Trucks. Dimensions: OD 2.833" x ID 1.378" x Wide .985". Replaces GM# 954257, X-88107 Specific Applications: 1946-1953 3/4 & 1 Ton Trucks (exc. DS, ES); 1948-1954 2 Ton SBC, TY, UY, VY, X - INTERMEDIATE BEARING

For 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1935-36 STD MAIN SHAFT REAR BEARING - 3 SPEED
954140
$54.50 EA
CHEVROLET 1935-36 STD MAIN SHAFT REAR BEARING - 3 SPEED
This is a Transmission Main Shaft Rear Bearing for 1935-1936 Chevrolet Standard Passenger Cars. Dimensions: ID - .985"; OD 2.047"; Thick .664". Bearing has a groove for snap ring. Replaces GM# 954140, ND 42108 Specific Applications:1935-1936 Standard Passenger Cars - Models EC, FC - with 3-Speed Transmission

For 1935 1936 Chevrolet Cars

Transmission Bearing Retainer
Chevrolet Parts -  1935-36 MASTER&P/U MAIN DRIVE BEAR. RET.-3SPEED
475995
$25.00 EA
CHEVROLET 1935-36 MASTER&P/U MAIN DRIVE BEAR. RET.-3SPEED
FOR NON-SYNCHROMESH TRANSMISSIONS

For 1932 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1931-37 MAIN DRIVE BEAR. RET.-4SPEED EXC-LT
590481
$25.00 EA
CHEVROLET 1931-37 MAIN DRIVE BEAR. RET.-4SPEED EXC-LT
NORS LIMITED STOCK

For 1932 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1932-36(EXC STD) MAIN DRIVE BEARING RETAINER
590550
$35.00 EA
CHEVROLET 1932-36(EXC STD) MAIN DRIVE BEARING RETAINER
This is the transmission main drive gear bearing retainer for all 1932-1936 Chevrolet passenger cars (except Standard). Replaces GM# 590550. NOTE: This part is an old stock (NORS) item and is LIMITED SUPPLY. Availability is subject to stock on hand.

For 1932 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1937 3-SPD MAIN DRIVE BEARING RETAINER
590851
$39.50 EA
CHEVROLET 1937 3-SPD MAIN DRIVE BEARING RETAINER
This transmission main drive bearing retainer fits all 1937 Chevrolet 3-speed transmissions for passenger car & pickups. Dimensions: 4-3/16" OD x 45/64" length, with 6 holes 1/4" diameter. This part is a NORS (New Old Replacement Stock) item - LIMITED SUPPLY - availability is subject to stock on hand. Replaces GM# 590851

For 1937 Chevrolet Cars and Trucks


Chevrolet Parts -  1940-54 MAIN DRIVE BEARING RETAINER-3 SPD
604932
$45.00 EA
CHEVROLET 1940-54 MAIN DRIVE BEARING RETAINER-3 SPD
1940-54 PASSENGER AND 1941-47 COMMERCIAL.

For 1941 1942 1944 1945 1946 1947 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STD MAIN DRIVE BEARING RETAINER
473217
$45.00 EA
CHEVROLET 1933-36 STD MAIN DRIVE BEARING RETAINER
This is a Transmission Main Drive Bearing Retainer for 1933-1936 Chevrolet Standard Passenger Cars. Dimensions: 3-13/16" OD x 3/4" High - 4-Holes 1/4" Diameter. Replaces GM# 473217

For 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1938-40 3SPD MAIN DRIVE BEARING RETAINER
607406
$49.00 EA
CHEVROLET 1938-40 3SPD MAIN DRIVE BEARING RETAINER
Transmission Bearing Retainer for All 1938-39 Chevrolet cars & trucks and 1940 Chevrolet trucks with 3-Speed Transmissions. REPLACES GM #590907, #604227 & #607406. Limited Supply NORS (New Old Replacement Stock) Subject to stock on hand. OD 4.125", ID 1.125"

For 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1925-31 MAIN DRIVE BEARING RETAINER
RW-289
$79.50 EA
CHEVROLET 1925-31 MAIN DRIVE BEARING RETAINER
This retainer has been updated with an elastomer seal to prevent leakage.

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars

21 Items Found
Copyright ©2021 The Filling Station, LLC
E-mail: fssales@fillingstation.com