FAX: (541) 258-6968
 
86 Items Found
Axle Bumpers
Chevrolet Parts -  1952-1972 TRUCK FRONT & REAR AXLE BUMPER
FS-989
USD $7.95 EA
CHEVROLET 1952-1972 TRUCK FRONT & REAR AXLE BUMPER
This is a rubber Front & Rear Axle Bumper for 1952-1972 Chevrolet & GMC trucks. Dimensions: 1-3/4" x 2-1/4" x 5". Up to four required per vehicle. See applications below. Note: Bolt centers are 4" and may differ from some applications. Check before ordering. Replaces GM# 3700034 Specific Applications: 1952 1 Ton (exc. D-D) - REAR; 1952 1-1/2 Ton - FRONT; 1953-1955 (1st Series) 3/4 & 1 Ton - FRONT & REAR; 1955-1959 (2nd Series) Series 3 - FRONT & REAR; 1957 Series 3A 4WD - REAR; 1960-1962 D-D 4WD - FRONT; 1960-1966 4WD - REAR; 1960-1969 Series 30 - REAR; 1963-1966 Series 20 & 30 (D-D) - FRONT; 1968-1969 Series 20 w/133" Wheelbase (Exc. D-D) - REAR; 1970-1972 Series 20 & 30, D-D (exc. aux. 15,000 or 17,000 springs - REAR

For 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1932-55 TRUCK FRONT SPRING BUMPER
CV-393
USD $9.95 EA
CHEVROLET 1932-55 TRUCK FRONT SPRING BUMPER
This bumper fits on top of the front spring and is mounted in a cast housing. Correct for all 1932-1942 Chevrolet & GMC Utility trucks; 1940-1952 All Commercial (except Dubl-Duti); 1953-1955 (1st Series) 1/2 Ton trucks. Replaces GM#'s 368400 & 3653084

For 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1963-72 PU REAR AXLE BUMPERS-2WD-W/COIL SPRINGS
CV-394
USD $18.95 PR
CHEVROLET 1963-72 PU REAR AXLE BUMPERS-2WD-W/COIL SPRINGS
W/COIL SPRINGS

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1939-1954 UPPER CONTROL ARM BUMPER
C-329
USD $19.95 PR
CHEVROLET 1939-1954 UPPER CONTROL ARM BUMPER
1939-1954 Chevrolet Passenger Car Suspension Bumpers - Upper Control Arm. Sold in a pai4r. Replaces GM# 1298323, 3708834, 3687670 Specific Applications: 1939-52: All passenger (except JB & KB) 1953-54: Corvette & all passenger 1955-62: Corvette

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars


Chevrolet Parts -  1955-1957 CAR REAR AXLE LOWER BUMPER
DC-862
Wait List
CHEVROLET 1955-1957 CAR REAR AXLE LOWER BUMPER
1 PAIR

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1955-1957 CAR REAR AXLE UPPER BUMPER
DC-861
USD $29.95 EA
CHEVROLET 1955-1957 CAR REAR AXLE UPPER BUMPER
One required in center of car.

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1955-57 PASS AXLE BUMPER RETAINER
TN-152
USD $36.95 PR
CHEVROLET 1955-57 PASS AXLE BUMPER RETAINER
AXLE BUMPER RETAINER

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1941-54 REAR SPRING/FRAME BUMPER PLATE
60-425C
USD $69.50 EA
CHEVROLET 1941-54 REAR SPRING/FRAME BUMPER PLATE
REAR SPRING/FRAME BUMPER PLATE

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Axle Hardware
Chevrolet Parts -  1925-32 REAR AXLE SHAFT THICK WASHER
AF-176
USD $2.95 EA
CHEVROLET 1925-32 REAR AXLE SHAFT THICK WASHER
This thick rear axle washer is used on all 1925-1932 Chevrolet Passenger cars & 1/2 Ton trucks (except 1932 models with large axles). Replaces GM# 341705. Two washers required per vehicle. Dimensions: ID .812" x OD 1.460" x .214" Thick.

For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1916-23 AXLE SHAFT NUT 5/8" -18
AF-137
USD $4.50 EA
CHEVROLET 1916-23 AXLE SHAFT NUT 5/8" -18
This axle shaft nut fits all 1916-1923 Chevrolet cars and light trucks. Castle nut - hex OD 15/16", height 11/16".

For 1916 1917 1918 1919 1920 1921 1922 1923 Chevrolet Cars and Trucks


Chevrolet Parts -  1941-54 PASS & 1/2TON REAR AXLE OVERHAUL MANUAL
DG-51
USD $10.95 EA
CHEVROLET 1941-54 PASS & 1/2TON REAR AXLE OVERHAUL MANUAL
Details the rebuilding of a closed driveshaft to differential assembly.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

Axle Seals
Chevrolet Parts -  1930-33 1-1/2 TON AXLE SEAL - INNER
RW-500
USD $6.95 EA
CHEVROLET 1930-33 1-1/2 TON AXLE SEAL - INNER
This is a replacement rear axle INNER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Designed for 2" OD at seal surface on axle shaft. Part of assembly GM# 359526 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks


Chevrolet Parts -  1946-81 3/4-1TON REAR AXLE SEAL
RW-531
USD $6.95 EA
CHEVROLET 1946-81 3/4-1TON REAR AXLE SEAL
This is a REAR Inner Bearing Wheel Hub Oil Seal for 1946-1981 3/4 & 1 Ton Chevrolet & GMC trucks with floating rear axle. Dimensions: ID 2.843" (72.210mm), OD 3.944" (100.180mm). Replaces GM# 3686563, 3828916

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks


Chevrolet Parts -  1925-29 REAR AXLE OUTER FELT SEAL
AF-370
USD $7.50 EA
CHEVROLET 1925-29 REAR AXLE OUTER FELT SEAL
Passenger & 1/2 Ton models.

For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks


Chevrolet Parts -  1958-64 PASSENGER REAR AXLE SEAL
RW-240
USD $9.95 EA
CHEVROLET 1958-64 PASSENGER REAR AXLE SEAL
This Rear Axle Seal fits 1958-1964 Chevrolet passenger cars. Includes seal and O-ring. Dimensions: ID 1.915" or 48.640mm; OD 2.548" or 64.720mm; 0.250" thick or 6.350mm. Replaces GM# 3749981, 3772999

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1932 REAR AXLE OUTSIDE SEAL-LG AXLE
RW-183
USD $11.50 EA
CHEVROLET 1932 REAR AXLE OUTSIDE SEAL-LG AXLE
-

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-32 REAR AXLE OUTSIDE SEAL
RW-41
USD $11.50 EA
CHEVROLET 1930-32 REAR AXLE OUTSIDE SEAL
This Rear Axle Seal fits all 1930-1931 Chevrolet passenger cars & 1/2 ton trucks. It also fits Early 1932 models with Small Taper. Large axle diameter at hub is 1.375, with 13/16" nut. Small axle diameter at hub 1.275 with 3/4" nut. Hub diameter at outer end: Large axle = 1.127"; Small axle = 1.033". Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1951-63 NAPCO 4X4 FRONT KNUCKLE FELT SEALS
TR-663
USD $12.50 SET
CHEVROLET 1951-63 NAPCO 4X4 FRONT KNUCKLE FELT SEALS
NAPCO 4X4 FRONT KNUCKLE FELT SEALS

For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1933-1954 CAR REAR AXLE SEAL; TRUCK PINION SEAL
FS-219
USD $15.95 EA
CHEVROLET 1933-1954 CAR REAR AXLE SEAL; TRUCK PINION SEAL
This Rear Axle Seal fits 1933-1954 Chevrolet passenger cars. Also fits 1941-1942 3/4 & 1 Ton Trucks as a Differential Pinion Seal. Dimensions: ID 1.578" or 40.08mm; OD 2.408" or 61.16mm; .500" thick or 12.70mm. Replaces GM# 3663166 Specific Applications: 1933-1936 Standard Passenger Models(CC,DC,EC,FC) - Rear Axle Seal; 1937-1954 All Passenger Models - Rear Axle Seal; 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks - Differential Pinion Seal

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-56 PASSENGER REAR AXLE SEAL
RW-218
USD $15.95 EA
CHEVROLET 1955-56 PASSENGER REAR AXLE SEAL
This Rear Axle Seal fits 1955-1956 Chevrolet passenger cars. Includes seal and o-ring. Dimensions: ID 1.880" or 47.75mm; OD 2.414" or 61.320mm; 0.250" thick or 6.350mm. Replaces GM# 3717671, 3730317

For 1955 1956 Chevrolet Cars


Chevrolet Parts -  1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
RW-499
USD $17.95 EA
CHEVROLET 1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
This is a replacement rear axle OUTER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Part of assembly GM# 359326 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks


Chevrolet Parts -  1937-1959 1-1/2 & 2 TON AXLE SEAL - HUB SEAL
FS-294
USD $19.95 EA
CHEVROLET 1937-1959 1-1/2 & 2 TON AXLE SEAL - HUB SEAL
This REAR Axle Hub Seal fits 1937-1959 Chevrolet Utility trucks (1-1/2 & 2 Ton models). Dimensions: OD 4.630 (117.62mm); ID 3.173 (80.59mm), Width .438". Replaces GM# 3681195, 3686537 Specific Applications: 1937-1953 Utility: 1952-1959 Utility (exc. 2-Spd Axle)

For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Trucks


Chevrolet Parts -  1933-1963 PICKUP/'1933-1942 CAR  REAR AXLE SEAL
FS-220
USD $22.95 EA
CHEVROLET 1933-1963 PICKUP/'1933-1942 CAR REAR AXLE SEAL
This rear axle seal fits 1933-1963 Chevrolet cars & trucks. Dimensions: Thickness: .500" or 12.70mm; OD: 2.782" or 70.66mm; ID: 1.875" or 47.63mm. Replaces GM# 592441. Specific Applications: 1933-1936 Passenger Models (Except Standard CC,DC,EC,FC); 1933-1942 All Commercial; 1946-1963 1/2 Ton Models

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks


Chevrolet Parts -  1939-1949 UTILITY FRONT WHEEL SEAL
AF-216
USD $29.95 EA
CHEVROLET 1939-1949 UTILITY FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1939-1949 Chevrolet & GMC Utility trucks. This seal is a felt wheel seal with metal casing. Hole in center is 2-7/64" ID with 3.192" OD. The seal has four metal tabs on one side. This is a LIMITED SUPPLY New Old Replacement Stock (NORS) item. Availability is subject to stock on hand. Replaces GM# 3650735, National 5991, Victor 49389, Standard 43-877 Specific Applications: 1939 COE Truck; 1940-1942 1-1/2 Ton & 2 Ton Utility; 1946-1949 SBC, 2 Ton (1st Design)

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks


Chevrolet Parts -  1925-31 REAR AXLE INNER SEAL ASSY.
AF-82
USD $64.50 EA
CHEVROLET 1925-31 REAR AXLE INNER SEAL ASSY.
The inner axle seal does the most to prevent oil leaks on early cars & pickups. It is likely that 80-90 year old seals are not doing what they need to do to prevent leaks. Replace this vital seal before you need to replace your brake linings from being oil soaked. Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on 1925-1931 Chevrolet passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing. Also see the outer seal replacement RW-41.

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE INNER SEAL ASSY.
AF-506
USD $69.50 EA
CHEVROLET 1932 REAR AXLE INNER SEAL ASSY.
Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1925-1929 REAR AXLE SEAL KIT
AF-370K
USD $152.00 KIT
CHEVROLET 1925-1929 REAR AXLE SEAL KIT
This kit replaces all of the rear axle seals and gaskets for 1925-1929 Chevrolet Passenger & 1/2 Ton Light Duty models. Each kit has two inner neoprene seal assemblies (AF-82); two outer felt seals (AF-370) and two rear axle bearing retainer gaskets (G-3725). Kit will replace seals for both sides.

For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks


Chevrolet Parts -  1930-1931 REAR AXLE SEAL KIT
AF-82K
USD $159.50 EA
CHEVROLET 1930-1931 REAR AXLE SEAL KIT
This seal kit includes two inner neoprene seal assemblies (AF-82); two outer neoprene seals that replace the felt (Use with the original seal housing); and two outer seal retainer gaskets. This kit gives you all the components necessary to replace the 85 year old original axle seals in a 1930-1931 Chevrolet passenger car & 1/2 ton truck differential. Kit will do both sides.

For 1930 1931 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE SEAL KIT - SMALL AXLE
AF-506SM
USD $169.50 KIT
CHEVROLET 1932 REAR AXLE SEAL KIT - SMALL AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-41 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH SMALL TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 REAR AXLE SEAL KIT - LARGE AXLE
AF-506LG
USD $169.50 EA
CHEVROLET 1932 REAR AXLE SEAL KIT - LARGE AXLE
This seal kit includes two inner neoprene seal assemblies (AF-506); two outer neoprene seals that replace the felt (RW-183 - Use with the original seal housing); and two outer seal retainer gaskets (G-5547). This kit gives you all the components necessary to replace the 80+ year old original axle seals in a 1932 Chevrolet passenger car & 1/2 ton truck differential WITH LARGE TAPER AXLE. Kit will do both sides. NOTE: In 1932 there were two different size axles used. The small diameter axle has 3/4" diameter threads at the outer end and measures 1.033" OD. The large diameter axle has 13/16" diameter threads at the outer end and measures 1.127". MEASURE YOUR ORIGINAL BEFORE ORDERING THIS KIT.

For 1932 Chevrolet Cars and Trucks

Drop Axle
Chevrolet Parts -  1947-55 1ST SERIES PICKUP 3" DROP AXLE
47-DA
Wait List
CHEVROLET 1947-55 1ST SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. MADE OF 2" SEAMLESS STEEL TUBING WITH CNC MACHINED ENDS. INCLUDES TIE PLATES. USE CAUTION WITH LOWERED LEAF SPRINGS, MAY RESULT IN BUMP STEER. NOTE: YOU MUST PURCHASE THE FS-255 (1955-59TRUCK) KING BOLT SET WHEN YOU PURCHASE THIS DROP-AXLE! THE 47-54 KING BOLT SET WILL NOT WORK WITH THIS AXLE. ALSO YOU WILL NEED TO UPGRADE TO A MODERN TIE ROD AND ENDS, SEE PART NUMBER 47-TRK.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1955-59 2ND SERIES PICKUP 3" DROP AXLE
55-DA
Wait List
CHEVROLET 1955-59 2ND SERIES PICKUP 3" DROP AXLE
LOWERS THE TRUCK 3" WHILE RETAINING STOCK SUSPENSION TRAVEL. MADE OF 2" SEAMLESS STEEL TUBING WITH CNC MACHINED ENDS. INCLUDES TIE PLATES. USE CAUTION WITH LOWERED LEAF SPRINGS, MAY RESULT IN BUMP STEER. NOTE: YOU WILL NEED TO SWITCH TO MODERN STYLE TIE ROD & ENDS - SEE PART NUMBER 55-TRK.

For 1955 1956 1957 1958 1959 Chevrolet Trucks

Dust Caps
Chevrolet Parts -  1933-60 CAR & 1/2 TON DUST CAP - CHROME
FS-431C
USD $10.50 PR
CHEVROLET 1933-60 CAR & 1/2 TON DUST CAP - CHROME
Fits 1933-42 passenger cars & commercial (except CC,DC,EC,FC,GA & HA), AND 1946-60 passenger & 1/2 ton. This dust cap is a replacement for the original. While not looking exactly like the original - it does an excellent job. CONFIRM 2.07 OD ~ WILL NOT FIT EVERY APPLICATION

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks

Hub Puller Tool Rental
Chevrolet Parts -  1930-1932 HUB PULLER RENTAL
AF-600
USD $35.00 EA
CHEVROLET 1930-1932 HUB PULLER RENTAL
This tool is used to pull the rear brake drum on 1930-1932 Chevrolet cars & trucks. Specially designed for this purpose - this tool is an absolute necessity during this procedure. There is a $250.00 deposit on this rental item. You will be charged $35.00 for the rental & $250.00 deposit. Return the tool - in good condition and receive a refund of $250.00 - if returned in good condition within 30 days. Rental is $25.00 per week after 30 days.

For 1930 1931 1932 Chevrolet Cars and Trucks

Rear Axle Conversion Kit
Chevrolet Parts -  1955-59 PU REAR AXLE CONV. KIT
55-RCK
USD $106.00 KIT
CHEVROLET 1955-59 PU REAR AXLE CONV. KIT
THIS CONVERSION KIT ALLOWS THE INSTALLATION OF ANY 3" DIAMETER REAR END, INCLUDING GM 10 BOLT, GM 12 BOLT, F-BODY 7.5" OR FORD 9". CAN ALSO BE USED AS A FLIP KIT FOR A 4" TO 5" DROP. WELDING IS REQUIRED. THIS KIT ALSO PROVIDES PROVISIONS FOR MODERN SHOCK ABSORBER MOUNTING, A VAST IMPROVEMENT OVER THE ORIGINAL LEVER-ACTION SHOCKS.

For 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1947-55 PU REAR AXLE CONV. KIT
47-RCK
USD $166.00 KIT
CHEVROLET 1947-55 PU REAR AXLE CONV. KIT
THIS CONVERSION KIT ALLOWS THE INSTALLATION OF ANY 3" DIAMETER REAR END, INCLUDING GM 10 BOLT, GM 12 BOLT, F-BODY 7.5" OR FORD 9". WELDING IS REQUIRED. THIS KIT ALSO PROVIDES PROVISIONS FOR MODERN SHOCK ABSORBER MOUNTING, A VAST IMPROVEMENT OVER THE ORIGINAL LEVER-ACTION SHOCKS.

For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Rear Axle Shafts
Chevrolet Parts -  1930-1931 CAR/PICKUP REAR AXLE SHAFT
CV-712
USD $395.00 EA
CHEVROLET 1930-1931 CAR/PICKUP REAR AXLE SHAFT
This is a direct replacement axle for all 1930 & 1931 Chevrolet passenger cars & 1/2 ton trucks. These are newly manufactured axles that have been machined from Tempered Chrome Moly. Dimensions: Length - 30.812" , Thread Size - 3/4-16, Spline Dia. 1.225". Made in the USA! Replaces GM# 357497 This part is oversize and additional delivery charges will apply. Call or email us for a freight quote.

For 1930 1931 Chevrolet Cars and Trucks

Seals
Chevrolet Parts -  1963-81 3/4T-1 TON FRONT WHEEL SEAL
RW-565
USD $3.95 EA
CHEVROLET 1963-81 3/4T-1 TON FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1963-1981 Chevrolet & GMC 3/4 & 1 Ton Trucks. This seal is a neoprene replacement for the front wheel seal. Dimensions: Outside Diameter 3.005" (76.330mm); Inside Diameter 2.180" (55.370mm), Width 0.495" (12.57mm) Replaces GM# 3857731 Specific Applications: 1963-1969 Series 20-30 (exc. D-D, 4WD); 1968-1969 Series 20-30 (D-D); 1970 Series 10 w/H.D. Front Brakes; 1970 Series 20-30 (Conv., D-D) G-20-30; 1972-1972 G-20 w/Disc Brake; 1971-1972 G-30; 1971-1972 Ser. 20-30 (Conv., D-D); 1973-1981 G-3; 1973-1981 CP-2, #, M.H.C.

For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks


Chevrolet Parts -  1961-68 CAR FRONT WHEEL SEAL
AF-133
USD $9.50 EA
CHEVROLET 1961-68 CAR FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1961-1968 Chevrolet passenger cars. This seal is a neoprene replacement for the front wheel seal. Dimensions: Outside Diameter 2.405" (61.090mm); Inside Diameter 1.875" (47.630mm), Width 0.0240" (6.100mm) Replaces GM# 3828585 Specific Applications: 1961-1968 Chevrolet Passenger Cars

For 1961 1962 1963 1964 1965 1966 1967 1968 Chevrolet Cars


Chevrolet Parts -  1955-57 PASSENGER FRONT WHEEL SEAL
RW-219
USD $9.95 EA
CHEVROLET 1955-57 PASSENGER FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1955-1957 Chevrolet passenger cars. This seal is a factory type felt seal. Dimensions: Outside Diameter 2.633" (66.880mm); Inside Diameter 1.875" (47.630mm), Width 0.347" (8.810mm). Replaces GM# 3725850 Specific Applications: 1955-1957 Chevrolet Passenger Cars

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1960-72 1/2 TON W/4WD FRONT WHEEL SEAL
AF-580
USD $9.95 EA
CHEVROLET 1960-72 1/2 TON W/4WD FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1960-1972 Chevrolet & GMC 1/2 Ton 4WD Trucks, including Blazer. This seal is a replacement neoprene seal for the original felt front wheel seal. Dimensions: Outside Diameter 3.256" (82.700mm); Inside Diameter 2.500" (63.500mm), Width 0.312" (7.920mm) Replaces GM# 6273948 Specific Applications: 1960-1972 Chevrolet & GMC 1/2 Ton 4WD Trucks, including Blazer & Jimmy

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1960-1961 1/2 TON FRONT WHEEL SEAL
AF-557
USD $9.95 EA
CHEVROLET 1960-1961 1/2 TON FRONT WHEEL SEAL
This is a FRONT Wheel Seal for 1960-1961 Chevrolet & GMC 1/2 Ton Trucks (exc. 4WD, D-D). Dimensions: Outside Diameter 2.968" (75.390mm); Inside Diameter 2.000" (50.800mm); Width 0.500" (12.70mm). Replaces GM# 3766493

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1958-60 CAR FRONT WHEEL SEAL
AF-129
USD $12.75 EA
CHEVROLET 1958-60 CAR FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1958-1960 Chevrolet passenger cars. This seal is a replacement for the factory type felt seal. Dimensions: Outside Diameter 2.71875"; Inside Diameter 2". Replaces GM# 3770169 Specific Applications: 1958-1960 Chevrolet Passenger Cars

For 1958 1959 1960 Chevrolet Cars


Chevrolet Parts -  1941-1959 FRONT WHEEL SEAL
FS-213
USD $12.95 EA
CHEVROLET 1941-1959 FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1941-1959 Chevrolet & GMC cars & trucks. This seal is a correct felt seal as original for the front wheel seal. Dimensions: Outside Diameter 2.969" (75.410mm); Inside Diameter 1.875" (47.630mm), Thickness .025" (6.350mm) Replaces GM# 3656536, National 6064 Specific Applications: 1941-1942 All Passenger & Truck; 1946-1954 All Passenger; 1946-1959 All 1/2 Ton Truck

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STANDARD FRONT WHEEL SEAL
RW-719
USD $14.95 EA
CHEVROLET 1933-36 STANDARD FRONT WHEEL SEAL
This is a FRONT Inner Wheel Seal for 1933-1936 Chevrolet Standard passenger cars. This seal is a neoprene replacement seal for the original felt wheel seal. Replaces GM# 472687 Specific Applications: 1933-1936 Standard Passenger Only

For 1933 1934 1935 1936 Chevrolet Cars


Chevrolet Parts -  1949-54 CAR FRONT WHEEL OIL DEFLECTOR
3687629
USD $14.95 EA
CHEVROLET 1949-54 CAR FRONT WHEEL OIL DEFLECTOR
This is the part that fits between the Front Wheel Grease Seal and the Spindle for 1949-1954 Chevrolet passenger cars & 1953-1962 Corvette. This part is a replacement for worn or damaged part. Dimensions: 1-17/32" ID x 3-7/16" OD. Replaces GM# 3687629.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1935-1959 LARGE TRUCK FRONT WHEEL SEAL
RW-458
USD $17.95 EA
CHEVROLET 1935-1959 LARGE TRUCK FRONT WHEEL SEAL
This is a Front Wheel Seal for 1935-1959 Chevrolet & GMC large trucks. Dimensions: 2.04" ID, 3.16" OD. Replaces GM# 379654 Specific Applications: 1935-1942 1-1/2 Ton Utility (exc. COE, H.D., MT, MY); 1946-1955 1-1/2 Ton Utility (exc. UJ, UK, VJ, VK, SBC, H.D.); 1946-1959 3/4 ton & 1 ton (exc. H.D.); 1960-1966 D-D (exc. 102" WB)

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks


Chevrolet Parts -  1925-54 MODIFIED FRONT WHEEL SEAL
FS-213M
USD $17.95 EA
CHEVROLET 1925-54 MODIFIED FRONT WHEEL SEAL
This is a Modified Front Wheel Seal designed for our Tapered Roller Bearing kits FS-178K & FS-216K. Dimensions: Thickness - .368"; OD - 3.130". Hub lip OD 2.975"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-1940 CAR/TRUCK FRONT WHEEL SEAL
FS-202
USD $23.95 EA
CHEVROLET 1923-1940 CAR/TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1916-1940 Chevrolet & GMC cars & trucks. This seal is a felt or neoprene replacement seal. Dimensions: 1.77" ID, 2.97" OD. Replaces GM# 335448, 352488, National 5070 Specific Applications: 1923-1930 All Passenger & Truck; 1931-40 Passenger and Commercial (exc Utility or 1933-1936 Standard Passenger)

For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT WHEEL SEAL
FS-202T
USD $34.50 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks. This seal is a NORS replacement for the original felt wheel seal. Dimensions: ID = 1.97 (50mm); OD = 3.16 (80mm) Replaces GM# 365277 Limited Supply. Specific Applications: 1931-1935 Chevrolet & GMC 1-1/2 & 2 Ton Trucks - Series: LT, M, N, O, P, Q. In 1935, fits early production trucks through Feb. 1, 1935.

For 1931 1932 1933 1934 1935 Chevrolet Trucks

Wheel Bearings
Chevrolet Parts -  1955-1964 WHEEL BEARING RETAINER GASKET
G-4345
USD $1.95 EA
CHEVROLET 1955-1964 WHEEL BEARING RETAINER GASKET
This is a wheel bearing retainer gasket for 1955-1964 Chevrolet passenger cars. 4-1/8" x 4-11/32" - four holes. Replaces GM# 3772374

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1933-1940 REAR AXLE BEARING INNER RACE
FS-315R
USD $29.00 EA
CHEVROLET 1933-1940 REAR AXLE BEARING INNER RACE
This is a Rear Axle Shaft Bearing INNER RACE for 1933-1940 Chevrolet cars & trucks. Check the condition of this part each time that removal of the rear axle is required. Replaces GM# 111122, Hyatt IR-1502. Specific Applications: 1933-1936 Passenger cars (exc. Standard - CC,DC,EC,FC); 1933-1940 All Truck (exc. Utility, KD,KE,KF)

For 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-1961 FRONT WHEEL BALL BEARING - OUTER
FS-177
USD $29.95 EA
CHEVROLET 1923-1961 FRONT WHEEL BALL BEARING - OUTER
This is a complete OUTER FRONT BALL bearing assembly for 1923-1961 Chevrolet & GMC cars & trucks. Dimensions: OD 2 5/64" (2.078"), ID 3/4" (.722"). Replaces GM# 909567, 909667, 909767, 909067, 909501, 909601, 909701, 909001, B-01, B-67 Specific Applications: 1923-1930: All Passenger & Truck - Replacement; 1931-1942: All (exc. Utility & 1933-36 Standard) - Replacement; 1946-1954: Passenger & 1/2 Ton Trucks - Replacement; 1955-1960: Passenger; 1955-1961: 1/2 Ton Truck (exc. 4WD)

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-1961 FRONT WHEEL TAPERED BEARING-OUTER
FS-177R
USD $32.95 EA
CHEVROLET 1923-1961 FRONT WHEEL TAPERED BEARING-OUTER
See also FS-178K, FS-216K or FS-66K for tapered roller bearing kit to replace all four inner and outer ball bearings with tapered roller type bearings. Bearing ID is .75" and OD is 2.08", Thick - 0.67"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars and Trucks


Chevrolet Parts -  1923-1940 FRONT WHEEL BALL BEARING - INNER
FS-178
USD $39.95 EA
CHEVROLET 1923-1940 FRONT WHEEL BALL BEARING - INNER
This is a complete INNER Front Ball Bearing assembly for all 1925-1940 Chevrolet & GMC cars & trucks (Exc 1933-1936 Standard & 1931-1940 Utility trucks). Dimensions: OD 2.961"; ID inner race 1.179". Replaces GM# 909502, 909602, 909702, 909002 See also FS-178K tapered roller bearing replacement kit.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1957 PASSENGER REAR WHEEL BEARING
FS-704
USD $39.95 EA
CHEVROLET 1957 PASSENGER REAR WHEEL BEARING
This is a REAR Wheel Bearing for 1957 Chevrolet Passenger Cars. Bearing comes with retaining ring. Replaces GM# 3799123, ND 904262, 904278

For 1957 Chevrolet Cars


Chevrolet Parts -  1955-1957 CAR FRONT WHEEL BEARING - INNER
FS-66
USD $39.95 EA
CHEVROLET 1955-1957 CAR FRONT WHEEL BEARING - INNER
This is an INNER wheel bearing assembly for all 1955-1957 Chevrolet passenger cars. Replaces GM# 909040, ND 909040

For 1955 1956 1957 Chevrolet Cars


Chevrolet Parts -  1935-1952 TRUCK FRONT BALL BEARING-OUTER
B-25
USD $39.95 EA
CHEVROLET 1935-1952 TRUCK FRONT BALL BEARING-OUTER
This is a complete OUTER FRONT WHEEL BALL Bearing Assembly for 1935-1952 Chevrolet & GMC Trucks. Dimensions: ID .8435"; OD 2.250". Replaces GM# 909525, 909625, 909725, 909025 Specific Applications: 1935-1942 Utility (exc. COE, MT, MY); 1946-1950 3/4 - 1-1/2 Ton (exc. SBC); 1951-1952 3/4 & 1 Ton

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STD FRONT WHEEL BEARING-OUTER NORS
FS-34
USD $49.00 EA
CHEVROLET 1933-36 STD FRONT WHEEL BEARING-OUTER NORS
This is a NORS wheel bearing - FRONT OUTER for 1933-1936 Chevrolet Standard Models Only. Dimensions: OD 1.873", ID .657". Replaces GM # 909021, 909521, 909621, 909721 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.

For 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-36 STD FRONT WHEEL BEARING-INNER
FS-37
USD $49.00 EA
CHEVROLET 1933-36 STD FRONT WHEEL BEARING-INNER
This is a NORS wheel bearing - FRONT INNER for 1933-1936 Chevrolet Standard Models Only. Replaces GM # 909022, 909522, 909622, 909722 NOTE: This is a LIMITED SUPPLY item. Availability is subject to stock on hand.

For 1933 1934 1935 1936 Chevrolet Cars and Trucks


Chevrolet Parts -  1932 PASS-1/2TON REAR WHEEL BEARING
RW-456
USD $49.50 EA
CHEVROLET 1932 PASS-1/2TON REAR WHEEL BEARING
This bearing is for the rear axle on all 1932 Chevrolet passenger cars & 1/2 ton trucks. Two required per vehicle. Dimensions: OD - 3.151" (80.09 mm), ID - 1.571" (39.90 mm). Replaces GM# 901208, ND 1208.

For 1932 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-41PASS. REAR WHEEL INNER RACE
FS-316R
USD $49.50 EA
CHEVROLET 1933-41PASS. REAR WHEEL INNER RACE
This Inner Rear Axle Bearing Race fits 1933-1941 Chevrolet passenger cars. Replaces GM# 111120, Hyatt IR-1500 Specific Applications: 1933-1936 Standard Passenger Models (CC,DC,EC,FC only); 1937-1941 All passenger & Sedan Delivery

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 Chevrolet Cars


Chevrolet Parts -  1941-59 FRONT BALL BEARING-INNER
FS-216
USD $49.95 EA
CHEVROLET 1941-59 FRONT BALL BEARING-INNER
This is the INNER Front Wheel Ball Bearing assembly for 1941-1959 Chevrolet & GMC cars & trucks. The inner bearing is 1.280" ID and 2.961" OD. Replaces GM# 909052, 909552, 909602, 909702 Specific Applcations: 1941-1942: All Cars & Trucks (exc. Utility); 1946-1954: Passenger, including Sedan Delivery; 1946-1959: 1/2 Ton Trucks Also see FS-216K for a tapered roller bearing replacement kit for the original ball bearings.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-1954 CAR REAR WHEEL BEARING
FS-316
USD $49.95 EA
CHEVROLET 1933-1954 CAR REAR WHEEL BEARING
This is a new Rear Axle Bearing that fits 1933-1954 Chevrolet passenger cars. Dimensions: OD 2.405 - (61.09mm); ID 1.588 (40.35mm); Thick .751 (19.08mm). Replaces GM# 111119, Hyatt OR1500 Specific Applications: 1933-1936 Standard Passenger Models(CC,DC,EC,FC); 1937-1954 All Passenger Models

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1958-1964 PASSENGER REAR AXLE BEARING
RW-241
USD $49.95 EA
CHEVROLET 1958-1964 PASSENGER REAR AXLE BEARING
This is a rear axle bearing for 1958-1964 Chevrolet Passenger Cars. It is a ball bearing and two are required per car. Replaces GM# 907294, ND RW607SY12

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1955 PASSENGER FRONT WHEEL BEARING - OUTER
FS-63
USD $49.95 EA
USD $29.95 EA ON SALE
CHEVROLET 1955 PASSENGER FRONT WHEEL BEARING - OUTER
This FRONT OUTER Wheel Bearing Assembly fits 1955 Chevrolet passenger cars. Replaces GM# 909041, ND 909041

For 1955 Chevrolet Cars


Chevrolet Parts -  1955-1956 PASSENGER REAR WHEEL BEARING
FS-661
USD $49.95 EA
CHEVROLET 1955-1956 PASSENGER REAR WHEEL BEARING
This is a REAR Wheel Bearing for 1955-1956 Chevrolet Passenger Cars. Bearing comes with retaining ring. Replaces GM# 3799122, ND RW507BSY-1BC

For 1955 1956 Chevrolet Cars


Chevrolet Parts -  1958-1960 PASS FRONT BALL BEARING-INNER
B-70
USD $49.95 EA
CHEVROLET 1958-1960 PASS FRONT BALL BEARING-INNER
This is a complete INNER FRONT BALL bearing assembly for 1958-1960 Chevrolet Passenger Cars. Replaces GM# 909070, ND 909070 Specific Applications: 1958-1960 Passenger, exc. Taxi

For 1958 1959 1960 Chevrolet Cars


Chevrolet Parts -  1925-1959 FRONT TAPERED WHEEL BEARING-INNER
FS-216R
USD $59.95 EA
CHEVROLET 1925-1959 FRONT TAPERED WHEEL BEARING-INNER
This is an INNER TAPERED ROLLER FRONT wheel bearing 1925-1959 Chevrolet & GMC cars & trucks. This bearing replaces the original ball bearing type with tapered roller type bearing. Dimensions: OD 2.966" (75.33mm) x ID 1.281" (32.53mm). Replaces GM# 909052, 909552, 909602, 909702 Specific Applications: 1925-1940 All Passenger & Trucks (exc. 1931-1940 Utility or 1933-1936 Standard Passenger) - requires adapter - see notes below; 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenge; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: To use this bearing on 1925-1940 passenger & 1/2 ton models (except 1933-35 Standard & Utility), you must also purchase and install FS-178RA bearing adapter.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1933-63CAR/PU REAR WHEEL BEARING
FS-315
USD $59.95 EA
CHEVROLET 1933-63CAR/PU REAR WHEEL BEARING
This is a new REAR AXLE SHAFT Bearing for 1933-1963 Chevrolet & GMC cars & trucks. Dimensions: OD: 2.781" x ID: 1.878" x Thick: .885". Replaces GM# 111121, Hyatt OR1502 Specific Applications: 1933-1936: Passenger (exc. 1933-36 Standard models:CC,DC,EC,FC); 1933-1939: All Trucks (except Utility); 1940-1963 1/2 Ton trucks

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks


Chevrolet Parts -  1935-1952 TRUCK FRONT BALL BEARING-INNER
B-26
USD $59.95 EA
CHEVROLET 1935-1952 TRUCK FRONT BALL BEARING-INNER
This is a complete INNER FRONT WHEEL BALL Bearing Assembly for 1935-1952 Chevrolet & GMC Trucks. Dimensions: ID 1.405"; OD 3.150". Replaces GM# 909526, 909626, 909726, 909026 Specific Applications: 1935-1942 Utility (exc. COE, MT, MY); 1946-1950 3/4 - 1-1/2 Ton (exc. SBC); 1951-1952 3/4 & 1 Ton

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks


Chevrolet Parts -  1946-1972 CARRIER & INNER REAR WHEEL BEARING
188930
USD $67.50 EA
CHEVROLET 1946-1972 CARRIER & INNER REAR WHEEL BEARING
This is a Differential Carrier Bearing and Inner Rear Wheel Bearing for 1946-1972 Chevrolet & GMC trucks. Bearing and Race together. Replaces GM #188930, Hyatt D11786, 11786Y Specific Applications: 1946-1967 3/4 & 1 TON (EXC. 11,000# AXLE); 1957-1959 Series 3E-3G with 4WD; 1968-1969 Series 20 (D-D, 4WD); 1968 Series 20 (exc. leaf springs, D-D, 4WD, 396; 1968-1969 Series 30; 1969 Series 20 (exc. D-D, 4WD, LPG, 396); 1971-1972 Series. 20-30, G-30 (EXC. 11,000# AXLE)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1916-32 WHEEL,  PINION & PROP. SHAFT BEARING
RW-455
USD $69.95 EA
CHEVROLET 1916-32 WHEEL, PINION & PROP. SHAFT BEARING
This bearing fits 1916-1932 Chevrolet cars & trucks as a REAR wheel bearing, REAR differential pinion bearing and REAR propeller shaft bearing. Dimensions: OD - 3.151" (80.09 mm); ID - 1.371" (34.8 mm); Thick .834" (21.18mm). It is a single row bearing. Replaces GM# 901307 & ND 1307 Specific Applications: 1916-1929 passenger cars & 1/2 ton truck - REAR PROPELLER SHAFT BEARING; 1916-1931 Passenger cars & 1/2 ton truck - REAR WHEEL BEARING; 1929-1932 Passenger cars & 1/2 ton truck - REAR DIFFERENTIAL PINION BEARING

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 Chevrolet Cars and Trucks


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT INNER BEARING
B-24
USD $79.50 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT INNER BEARING
This is a complete INNER FRONT WHEEL BALL Bearing Assembly for 1931-1935 Chevrolet & GMC Trucks. Dimensions: ID .750"; OD 1.310". For 1-1/2 Ton models. In 1935, fits early production trucks through Feb. 1, 1935. Limited Supply. Replaces GM# 909024 Specific Applications: 1931-1935 Utility Models LT, M, N, O, P, Q - 1-1/2 Ton Trucks

For 1931 1932 1933 1934 1935 Chevrolet Trucks


Chevrolet Parts -  1953-1967 TRUCK FRONT BALL BEARING-INNER
B-44
USD $79.95 EA
CHEVROLET 1953-1967 TRUCK FRONT BALL BEARING-INNER
This is an INNER FRONT Wheel Bearing for 1953-1967 Chevrolet & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks. Replaces GM# 909044, 909546, 909648, 909726, ND 909648 Specific Applications: 1953-1955 (1st Series) 1-1/2 Ton, exc. SBC, HD; 1953-1959 3/4 & 1 Ton, exc. HD; 1960-1966 D-D (exc. 102" W.B.) 1967 Series 20 & 30(D-D) exc. 11,000 lb. Axle

For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 Chevrolet Cars and Trucks


Chevrolet Parts -  1931-35 UTILITY TRUCK FRONT OUTER BEARING
B-23
USD $79.95 EA
CHEVROLET 1931-35 UTILITY TRUCK FRONT OUTER BEARING
This is a complete OUTER FRONT WHEEL BALL Bearing Assembly for 1931-1935 Chevrolet & GMC Trucks. Dimensions: ID .750"; OD 1.310". For 1-1/2 Ton models. In 1935, fits early production trucks through Feb. 1, 1935. Limited Supply - availability is subject to stock on hand. Replaces GM# 909023, 909523, 909623, 909723 Specific Applications: 1931-1935 Utility Models LT, M, N, O, P, Q - 1-1/2 Ton Trucks

For 1931 1932 1933 1934 1935 Chevrolet Trucks


Chevrolet Parts -  1946-72 3/4 & 1TON OUTER REAR WHEEL BEARING
188932
USD $79.95 EA
CHEVROLET 1946-72 3/4 & 1TON OUTER REAR WHEEL BEARING
This is an OUTER REAR Wheel Bearing for 1946-1972 Chevrolet & GMC 3/4 & 1 Ton Trucks. Wheel Bearing and Race set. Dimensions: Cone Bore=2.0312", Cone Length=0.875", Cone Radius=0.078", Cup Outer Diam=3.5433, Cup Length=0.625", Cup Radius=0.078". Replaces GM# 188932, HY B11630, HY 11630Z Specific Applications: 1946-1966 3/4 & 1 TON (exc. 11,000# AXLE) - Series 20 & 30; 1967-1972 Series 20 & 30, G-30 (exc. 11,000# AXLE)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks


Chevrolet Parts -  1956-57 FRONT ROLLER BEARING - INNER
FS-66R
Wait List
CHEVROLET 1956-57 FRONT ROLLER BEARING - INNER
Also see FS-66K for a tapered roller bearing replacement kit for the original ball bearings.

For 1956 1957 Chevrolet Cars


Chevrolet Parts -  1923-1940 FRONT WHEEL TAPERED BEARING - INNER
FS-178R
USD $99.00 EA
CHEVROLET 1923-1940 FRONT WHEEL TAPERED BEARING - INNER
This is an INNER Tapered Roller Bearing for 1923-1940 Chevrolet passenger cars & 1/2 ton trucks, except 1933-36 Standard & Utility. Replaces GM# 909002, 909502, 909602, 909702. NOTE: Requires using FS-213M Wheel Seal.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1960-61 1/2 TON FRONT BALL BEARING-INNER
B-66
USD $99.95 EA
CHEVROLET 1960-61 1/2 TON FRONT BALL BEARING-INNER
This is the INNER Front Wheel Bearing assembly for 1960-1961 Chevrolet & GMC 1/2 Ton trucks. Replaces GM# 909066, ND 909566, ND 909762, ND 909666 Specific Applcations: 1960-1961 Chevy & GMC 1/2 Ton Trucks (exc 4WD)

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1960-61 SER. 20-40 (EXC 4WD) FRONT INNER WHEEL BEARING
B-48
USD $129.95 EA
CHEVROLET 1960-61 SER. 20-40 (EXC 4WD) FRONT INNER WHEEL BEARING
This is the INNER Front Wheel Bearing assembly for 1960-1961 Chevrolet & GMC 3/4, 1 & 1-1/2 Ton trucks. Replaces GM# 90948 Specific Applcations: 1960-1961 Chevy & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks (exc 4WD, DD) - Series 20, 30 & 40

For 1960 1961 Chevrolet Trucks


Chevrolet Parts -  1941-1959 FRONT WHEEL TAPERED BEARING KIT
FS-216K
USD $139.50 KIT
CHEVROLET 1941-1959 FRONT WHEEL TAPERED BEARING KIT
This is a TAPERED ROLLER FRONT wheel bearing kit for 1941-1959 Chevrolet & GMC cars & trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 INNER and 2 OUTER tapered roller bearings with 2 Front Wheel Seals, made especially for this installation. Dimensions: INNER Bearing - OD 2.966" (75.33mm) x ID 1.281" (32.53mm); OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm). Replaces GM# 909001, 909052, 909501, 909601, 909701, 909552, 909602, 909702 Specific Applications: 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenger; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: Check your original bearing numbers BEFORE ordering!

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks


Chevrolet Parts -  1953-1967 TRUCK FRONT BALL BEARING-OUTER
B-47
Wait List
CHEVROLET 1953-1967 TRUCK FRONT BALL BEARING-OUTER
This is an OUTER FRONT Wheel Bearing for 1953-1967 Chevrolet & GMC 3/4 Ton, 1 Ton & 1-1/2 Ton Trucks. Replaces GM# 909047, ND 909547, ND 909725, ND 909673 Specific Applications: 1953-1955 (1st Series) 1-1/2 Ton, exc. SBC, HD; 1953-1959 3/4 & 1 Ton, exc. HD; 1960-1966 D-D (exc. 102" W.B.) 1967 Series 20 & 30(D-D) exc. 11,000 lb. Axle

For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 Chevrolet Cars and Trucks


Chevrolet Parts -  1956-57 Passenger  TAPERED BEARING KIT
FS-66K
Wait List
CHEVROLET 1956-57 Passenger TAPERED BEARING KIT
This kit fits 1956-1957 Chevrolet passenger cars. They replace the original ball bearings with tapered roller bearings. Replaces GM# 909040, 909067

For 1956 1957 Chevrolet Cars


Chevrolet Parts -  1923-1940 FRONT TAPERED WHEEL  BEARING KIT
FS-178K
USD $199.50 SET
CHEVROLET 1923-1940 FRONT TAPERED WHEEL BEARING KIT
This is a tapered FRONT wheel bearing kit for 1923-1940 Chevrolet car & Chevy & GMC trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 each INNER and 2 each OUTER tapered roller bearings with 2 each front wheel seals, made especially for this installation. Replaces GM# 909001, 909002, 909501, 909601, 909701, 909502, 909602, 909702 Specific Applications: 1923-1930: All Passenger & Trucks; 1931-1940: All (except 1933-36 Standard Passenger or Utility Truck) NOTE: 1937-1939 Canadian manufactured cars & trucks used different inner wheel bearings and we do not have bearings for that application. Most foreign export Chevrolets were made in Canada. Check your original bearing numbers and dimensions BEFORE ordering! Dimensions: INNER Bearing - OD 2.966" (75.33mm) x ID 1.1885" (30.18mm); OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm)

For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks


Chevrolet Parts -  1955-64 CAR FRONT TAPERED BEARING CONV KIT
FS-1028
USD $225.00 KIT
CHEVROLET 1955-64 CAR FRONT TAPERED BEARING CONV KIT
Kit comes complete with new forged aluminum hubs, studs, inner bearings, outer bearings, races, grease seals, hub caps, and spindle nut washers. Easy to install, fits with stock brake drums.

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars

86 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com