This is a replacement CHROME Oil Breather & Fill Cap for 1954-1963 Chevrolet 6-cylinder engines. Mounts on top of the valve cover with a twist to lock it in place. Vented cap functions for crankcase breathing as well as oil fill.
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
This is a NORS (New Old Replacement Stock) oil filler cap for all 1931-1948 Chevrolet cars & trucks. LIMITED SUPPLY ITEM - availability is subject to stock on hand. Replaces GM# 838022
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Cars
This is an all new Oil Filter Attachment for 1929-1930 Chevrolet engines. This unit replaces the stock oil distributor valve and provides for the attachment of a full-flow oil filter! All of the oil from the pump passes through the filter before being directed to the various bearings in the engine. All modern cars use full-flow filters to prolong engine life. Carefully designed to replace the existing oil distributor valve, this fixture fits snugly just forward of the carburetor. It does not interfere with the generator, the horn, the dipstick or the oil filler tube. This "Original Billy Possum Brand" filter attachment requires no modification to the engine whatsoever except for the requirement of an "Original Billy Possum Brand" gear-type oil pump, which your car ought to have anyway. Don't jeopardize your investment by using the old vane pump and no oil filter. Even General Motors eventually upgraded the oil pumps for these early 6 cylinder engines to gear-type pumps. Purchase oil filter separately - SEE AF-87X. RECOMMENDED ONLY WITH A GEAR TYPE OIL PUMP!
The purpose of the "Original Billy Possum Brand" full-flow oil filter attachment is to filter all of the oil that is pumped throughout the engine. Whereas the early 6-cylinder Chevrolet engines had no oil filter at all, all modern engines provide continuous filtering of all of the oil. Clean oil means prolonged engine life. Non-filtered oil pumped to the bearings and other moving parts in an engine carry abrasive particles just where you do not want them. Our filter attachment also replaces the original oil distributor valve. In addition to providing oil to the main and connecting rod bearings, oil is also pumped to the rocker arm shafts which distribute oil to all of the rocker arm bushings. One further purpose of the oil distributor valve is to provide the pressure indicated on the instrument panel oil pressure gauge. Purchase oil filter separately.
The filter dimensions are 4-1/8" dia. by 4-7/8" overall height. Two neoprene gaskets are provided to accommodate most filter applications. This filter can be used on Fram, AC, Beehive and other early add-on filters that use replaceable filter cartridges. COMPARE THE SIZE, EARLY FILTERS WERE AN ACCESSORY
The filter dimensions are 4-1/8" dia. by 5-1/4" overall height and comes with a gasket for the lid of the housing. The neoprene gasket is 5-3/16" OD and 4-3/8" ID. Filter has a built-in seal in the center that has a 9/16" ID. COMPARE DIMENSIONS, EARLY FILTERS WERE AN ACCESSORY
This oil filter assembly is a correct reproduction for all 1927-1928 Chevrolet cars & trucks. The overall length is 8" x 3-1/2" diameter. Inlet - Male at top; Outlet - Female at bottom. Replaces GM# 851307
This Main Bearing Oil Line Cupped Soft Plug or Expansion Plug is used on Chevrolet engines for All 1932-1935 cars & trucks. Dimensions: 29/64" OD Cup Type. Replaces GM# 836754
This is a Rocker Arm Oil Line Kit from the Oil Distributor to the Rocker Arms on 1929-1936 Chevrolet cars & trucks. Kit consists of 3/16" copper line, two compression nuts & two compression sleeves.
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This oil distributor to rocker arm oil line kit fits all 1937-1953 Chevrolet 216 CID engines, also 1941-1949 235 CID engines. Kit comes with 30" of 3/16" copper tubing and all fittings. Replaces GM # 609912
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a Flexible Oil & Gas Hose for Chevrolet & GMC cars & trucks with accessory oil filters. This hose is 15" long. Fixed end of hose has 7/16"-27 thread. Adjusting end of hose has 7/16"-24 flare end. Hose comes with multiple fittings to adapt to most applications. Also see FS-84 for a 19" long hose.
This is a Flexible Oil & Gas Hose for Chevrolet & GMC cars & trucks with accessory oil filters. This hose is 19" long. Hose comes with multiple fittings to adapt for most applications. Also see FS-82 for a 15" long hose.
This Oil Pan Plug Gasket fits all 1929-1972 Chevrolet & GMC cars & trucks. It is a copper-bestos crush type gasket with a 1/2" ID hole, 13/16" OD. Made in the USA! Replaces GM# 344690
This is an Oil Pan Plug for all 1929-1972 Chevrolet & GMC cars & trucks. Thread is 1/2-20, Length under head is 1/2". It comes with nylon gasket. Replaces GM# 839079, 344690
This is a MAGNETIC Oil Pan Plug for all 1929-1972 Chevrolet & GMC cars & trucks. Thread is 1/2-20, Length under head is 43/64". It comes with nylon gasket.
This BASIC Lisle 27000 rope seal installation kit includes everything needed to speed up a long, slow job. Cork screw puller makes it easy to remove old seal. To install new seal, 27000 includes a pulling wire with a removable T-handle and spring steel clip that grips the seal firmly as it is pulled into position. Two extra clips are furnished. Saves many times its cost every time it is used. Use for G-1011 or G-5144 rope seal installation.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This PREMIUM KD Tools rope seal installation set includes everything needed to speed up a long, slow job. This kit works for both work and neoprene type seals. This set includes a wick seal remover, installer, guide funnels, pusher, offset trimmer and neoprene seal punches. Use for G-1011 or G-5144 rope seal installation.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a NORS (New Old Replacement Stock) gear type oil pump that fits all 1937-1939 Chevrolet cars & trucks. It is a direct replacement for the original. It is recommended that the pickup and screen be replaced when changing the oil pump. Order RW-533 oil pump pickup and screen separately. Replaces GM# 838440. This is a LIMITED SUPPLY item. Availability is subject to stock on hand.
This oil pump fits all Chevrolet car & truck engines in 1935. It is a gear type oil pump and has a male stud that mates to the female slot on the distributor. This is a limited supply item New Old Replacement Stock (NORS). Replaces GM# 604171, 604509 & 837753. Shaft OD 1.061" Note: This pump requires the use of a 1937-39 oil pump pickup & screen (or order our number RW-533 or RW-533R).
This is a replacement Gear Type Oil Pump for 1933-1934 Master passenger & truck engines (will not fit 1933-1934 Standard passenger). Replaces GM# 837201, 604508. This part has been discontinued by our supplier and is a LIMITED SUPPLY item. Availability is subject to stock on hand. Note: This pump requires the use of a 1937-39 oil pump pickup & screen (or order our number RW-533 or RW-533R).
This oil pump fits all Chevrolet engines in 1936. It is a gear type oil pump and has a female slot that mates to the male stud on the distributor shaft. This is a limited supply item New Old Replacement Stock (NORS). Replaces GM# 604510. Shaft OD 1.064" Note: This pump requires the use of a 1937-39 oil pump pickup & screen (or order our number RW-533 or RW-533R).
This is a new oil pump assembly for 1955-1962 Chevrolet cars & trucks with 6-cylinder engines, including 235 & 261 CID. Replaces GM# 3815635 Specific Applications: 1955-1962 All Passenger & Truck
For 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a new oil pump for all 1940-1952 (both 216 & 235 CID engines) Chevrolet cars & trucks. It also fits all Chevy engines in 1953 (Except passenger cars with Powerglide transmissions). Replaces GM# 839157 & 839277.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a replacement gear type oil pump that fits all 1930-1934 Chevrolet cars & trucks. Replaces GM# 604507, 473730 Specific Applications: 1930-1932 All Cars & Trucks; 1933-1934 Standard Passenger Only Note: This pump requires the use of a 1937-39 oil pump pickup & screen (or order our number RW-533 or RW-533R). Order also FS-435 Oil Pump Thrust Washer.
For 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
This is a NORS (New Old Replacement Stock) oil pump pickup & screen assembly that fits 1929-1939 Chevrolet gear type oil pumps. Will not work on original vane oil pumps. Each assembly comes with the housing, screen, wire retainer and oil pickup. Also see RW-533R. LIMITED SUPPLY ITEM - availability is subject to stock on hand. Replaces GM#'s 838458, 838457, 838803, 838452
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This oil pick up housing and screen assembly can be used with reproduction or original gear type oil pumps for 1927-1939 Chevrolet cars & trucks. Each assembly comes with the housing, screen, wire retainer and oil pickup. Replaces GM#'s 838458, 838457, 838803, 838452.
For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
