This is a New Old Replacement Stock (NORS) Ammeter Gauge for all 1928-1932 Chevrolet cars & trucks. Replaces GM# 857053. Limited Supply Item - availability is subject to stock on hand. Specific Applications: 1928 Passenger models - Series AB 1929-1932 All Cars & Trucks
For 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
This is a New Old Replacement Stock (NORS) ammeter gauge that fits 1936 Chevrolet Master passenger cars and 1936-1939 Chevy trucks. This is a Limited Supply item and availability is subject to stock on hand. Replaces GM# 857807.
This is a New Old Replacement Stock (NORS) Ammeter Gauge for all 1933 Chevrolet Master Passenger cars & 1933-1935 Chevrolet Trucks. Replaces GM# 857585. Limited Supply Item - availability is subject to stock on hand.
This is a Battery or Ammeter Gauge for 1947-1951 GMC Truck. It has a Red Needle. Correct for GMC Trucks, but will fit Chevy truck. Color of face is different than Chevy.
This is a Dash Gauge Bezel Gasket for 1940-1946 Chevrolet & GMC cars & trucks. Replaces GM# 1565309 Specific Applications: 1940 Chevrolet Passenger Cars; 1940-1946 Chevrolet & GMC Trucks
For 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a 6-Volt Fuel Gauge with in the dash for 1947-1951 GMC trucks. It is correct for GMC Trucks, but will fit Chevy truck. Color of face is different than Chevy. Needle is Red. Replaces GM# 1517015. THIS IS A NEGATIVE GROUND GAUGE. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly.
This is a 12-Volt Fuel Gauge in the dash for 1947-1951 GMC trucks. It is correct for GMC Trucks, but will fit Chevy truck. Color of face is different than Chevy. Needle is Red. Replaces GM# 1517015. THIS IS A NEGATIVE GROUND GAUGE. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly.
This is a Fuel Gauge in the Dash for 1951-1952 Chevrolet passenger cars. For 6 volt systems or use with fuel gauge resistor for 12 volt. Replaces GM# 1517255
This is a CHROME gauge bezel for 1933-1942 Chevrolet and GMC cars & trucks. Made in brass then chrome plated. Two required per vehicle. Replaces GM# 858992 Specific Applications: 1933-1935 All Passenger cars; 1934-1939 Chevrolet & GMC Trucks 1940-1942 Chevy & GMC Trucks with Flat Face Cowl
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 Chevrolet Cars and Trucks
This is a CHROME Speedometer bezel for 1933-1942 Chevrolet and GMC cars & trucks. Made in brass then chrome plated. Part of AC# 867978, 868720 Specific Applications: 1933-1935 All Passenger cars; 1934-1939 Chevrolet & GMC Trucks 1940-1942 Chevy & GMC Trucks with Flat Face Cowl
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 Chevrolet Cars and Trucks
This BLACK Instrument Bezel fits 1964-1966 Chevrolet trucks, Suburbans and Panel trucks. This stamped steel bezel is manufactured to original specifications and is pre-drilled with holes to accommodate original dash accessories. Approximately 19" X 7".
This is a beautiful reproduction of the Chrome Dash Instrument Bezel for 1940-1946 Chevrolet & GMC trucks. The all chrome finish comes without the original brown paint highlights. Replaces GM# 1565472
For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a 1975-1977 Chevrolet Truck Dash Bezel - Black with Silver Trim for trucks without Air Conditioning. Will fit 1978-80 if TN-201 1973-77 lower cover is used.
This CHROME Instrument Bezel fits 1964-1966 Chevrolet trucks, Suburbans and Panel trucks. This stamped steel bezel is manufactured to original specifications and is pre-drilled with holes to accommodate original dash accessories. Approximately 19" X 7".
This dash bezel fits 1981-1983 Chevy & GMC Pickups with air conditioning. This bezel comes in black with chrome highlights and includes the lower steering column cover.
This dash bezel fits 1984-1987 Chevy GMC Pickups with air conditioning and NO Wiper Switch. This bezel comes in black with chrome highlights and includes the lower steering column cover.
This reproduction dash bezel fits 1978-1980 Chevrolet trucks with Air Conditioning. Bezel is black and aluminum. Note: This bezel will fit 1975-1977 if used with TN-202 1978-1980 lower steering column cover.
Includes chrome instrument bezel, chrome speaker bezel with black insert, and 2 piece steering column bezels. Order L-82 "Bel Air" speaker emblem or RW-123 "Chevrolet" speaker emblem separately.
Includes chrome instrument bezel, chrome speaker bezel with black insert, and 2 piece steering column bezels. Order L-82 "Bel Air" speaker emblem or RW-123 "Chevrolet" speaker emblem separately.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 6-VOLT, 6-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-30 lbs., Temperature 100-220 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 12-VOLT, 8-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-60 lbs., Temperature 100-220 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1950-1953 Chevrolet Trucks & 1952-1953 GMC Trucks. 6-VOLT, 6-CYLINDER, with White needles. Gauges included: Oil 0-30 lbs., Temperature 100-220 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1950-1953 Chevrolet Trucks & 1952-1953 GMC Trucks. 12-VOLT, 8-CYLINDER, with White needles. Gauges included: Oil 0-60 lbs., Temperature 100-220 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 6-VOLT, 6-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-30 lbs., Temperature 100-212 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 12-VOLT, 8-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-60 lbs., Temperature 100-212 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 12-VOLT, 6-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-30 lbs., Temperature 100-212 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1947-1949 Chevrolet Trucks. 12-VOLT, 6-CYLINDER, with Red needles. Correct for Chevy Trucks but will fit GMC - color is different than GMC. Gauges included: Oil 0-30 lbs., Temperature 100-220 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1950-53 Chevrolet Trucks and 1952-1953 GMC Trucks. 6-VOLT, 6-CYLINDER, with White needles. Gauges included: Oil 0-30 lbs., Temperature 100-212 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.
This is a Complete Gauge Cluster Assembly for 1950-53 Chevrolet Trucks and 1952-1953 GMC Trucks. 12-VOLT, 8-CYLINDER, with White needles. Gauges included: Oil 0-60 lbs., Temperature 100-212 Degrees, Battery (Ammeter), and Fuel Gauge. Assembly comes with chrome rim and glass, complete and ready to install. NOTE: Before installing into vehicle, check that the fuel gauge is well grounded to the housing on the back side. Add solder to the back side to insure good contact. Electronic gauges must have a good ground to operate properly. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, ORMD GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.