This is a neoprene replacement seal for the original cork shackle seals for 1934-1959 Chevrolet cars & trucks. Seal outside diameter is 15/16". Compare to 70-1124 Cork seal. Specific Applications: 1934-39:FRONT - All with straight axle; 1934-35 REAR - 1934-35 Master Passenger & truck Series DA, DB, P, EA, EB; 1936-59 FRONT & REAR - All passenger & pickup with steel bushings Replaces GM# 593705.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks
This spring shackle tension washer fits all 1930-1932 Chevrolet passenger cars & 1/2 ton trucks; also 1933-1935 Standard passenger models on the front & rear shackles. One tension washer required per shackle. Refer to shop manual for procedure to adjust the shackle. Do not over-tighten! When adjusted properly, install the lock plate AF-96 to hold the adjustment. Replaces GM# 359469 NOTE: This is a LIMITED SUPPLY ITEM - availability is subject to stock on hand.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
This shackle pin fits 1930-1935 Chevrolet cars & trucks. These tapered pins are subject to extreme wear and often need to be replaced. They must be pressed into place in the end of the spring and into the bracket on the frame. This will take a special tool, like a Porta-Power, to install them. Dimensions: 2-15/16" long x .762" OD. Replaces GM# 358326. Up to 8 pieces required per vehicle. Specific Applications: 1930-33: All Passenger & Truck - FRONT, 1930-33: All Passenger & 1/2 Ton Truck - REAR, 1934-35: Standard Passenger - FRONT & REAR.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
This is a Tapered & Threaded Spring Shackle Pin for 1934-1955 Chevrolet & GMC cars & trucks. Pin is 3-1/16" OL. Replaces GM# 373199 Specific Applications: 1934-1940 All Straight Axle Models (exc COE); 1941-1948 Passenger, 1/2 Ton, 3/4 Ton (exc. D-D); 1949-1955 (1st Series) 1/2 & 3/4 Ton Trucks (exc. D-D)
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a REAR Spring Pin & Bushing for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 & 3/4 Ton Trucks. Pin Dimensions: 3-7/8" x 11/16". Replaces GM# 3717034, 3713275
This is a REAR Spring Shackle Pin for 1933-1968 Chevrolet & GMC Trucks. Dimensions: 4-5/16" Long x 7/8" OD with flat keyway. Grease fitting 1/8-27 NPT. 6 pins required per vehicle. Replaces GM# 369722, 3656669 Specific Applications: 1933-1955 (1st Series) Chevrolet & GMC 3/4 Ton, 1 ton & Utility; 1955-1963 (2nd Series) Chevy & GMC Utility; 1955-1968 (2nd Series) 1 ton (exc Double Duty); 1960-1965 1/2 & 3/4 ton 4-Wheel Drive; 1968: 3/4 Ton
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1957 Chevrolet passenger cars that have 5-leaf rear springs. They replace GM# 3733993 Specific Applications: 1957 Chevrolet Convertible, Sedan Delivery, Nomad, Taxi; 1957 Chevrolet Passenger cars (Heavy Duty) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1955-1956 Chevrolet passenger cars that have 4-leaf rear springs. They replace GM# 3720952 Specific Applications: 1955-1956 Chevrolet Passenger cars (exc. Station Wagon or Sedan Delivery) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1957 Chevrolet passenger cars that have 4-leaf rear springs. They replace GM# 3733986 Specific Applications: 1957 Chevrolet Passenger cars (exc. Convertible, Station Wagon or Sedan Delivery) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1955-1956 Chevrolet passenger cars that have 5-leaf rear springs. They replace GM# 3721072 Specific Applications: 1955-1956 Chevrolet Sedan Delivery, Nomad, Taxi; 1955-1956 Chevrolet Passenger cars (Heavy Duty) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1967-1972 Chevrolet 4-Wheel Drive trucks that have 3-leaf Heavy Duty front springs. Replaces GM# 3916867 Specific Applications: 1967-1968 K-10 & K-20 4WD (with H.D.) - 1/2 & 3/4 Ton Trucks; 1969-1972 K-10, K-20, Blazer K-Series 4WD (with H.D.) - 1/2 & 3/4 Ton Trucks Features: * Spring Capacity = 1100 lbs. * Width = 2-1/2 * # of Leaves = 3 * Measures (A/B) = 22 x 22 * Pack Thickness = 1-5/16 * Includes front eye bushing only Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1937-1938 Chevrolet & GMC 1/2 Ton Trucks. They are an 8-leaf spring and are sold in pairs. Replaces GM# 594075 Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
This is a pair of FRONT leaf springs for 1947-1955 (1st Series) Chevrolet & GMC 1/2 & 3/4 Ton Trucks. Each spring assembly comes with a smooth bushing pressed into the spring hanger end and a threaded bushing pressed into the shackle end. These are 8-leaf springs. Replaces GM# 3693911, 3702793 This item will have special freight charges. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1934-1936 Chevrolet & GMC 1/2 Ton Trucks. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 376000 Specific Applications: 1934-1936 Chevrolet & GMC 1/2 Ton Models DB, EB, FB Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
This is a pair of rear leaf spring assemblies for 1934-1946 Chevrolet & GMC 1/2 Ton Trucks. New assemblies made in the USA. 8-Leaf Springs, 1-3/4" Wide x 54" Long. Ready to install. Dimensions: Width 1-3/4", Front Half 27-1/16", Rear Half 27-1/16", Bushings included. Made in the USA! Replaces GM# 374835, 599517, 599529, 3659368 Specific Applications: 1934-1946 Chevrolet & GMC 1/2 ton models DB,EB,FB,GC,HC,JC,KC,AK,BK,CK,DP. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a pair of REAR leaf springs for 1947-1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks. Each spring assembly comes with a smooth bushing pressed into the spring hanger end and a threaded bushing pressed into the shackle end. These are 8-leaf springs. Replaces GM# 3683317 This item will have special freight charges. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks
This is a pair of REAR leaf springs for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 Ton Trucks. Each spring assembly comes with a smooth bushing pressed into the spring hanger end and a threaded bushing pressed into the shackle end. These are 7-leaf springs, 2 inches wide. Replaces GM# 3712520 This item will have special freight charges. Call or email us for a freight quote.
This is a pair of FRONT leaf springs for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 Ton Trucks. Each spring assembly comes with a smooth bushing pressed into the spring hanger end and a threaded bushing pressed into the shackle end. These are 6-leaf springs. Replaces GM# 3732552 This item will have special freight charges. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1939-1946 Chevrolet & GMC 1/2 & 3/4 Ton Trucks. They are a 7-leaf spring and are sold in pairs. Dimensions: 1-3/4" Wide x 36" Long. Replaces GM# 599316 Specific Applications: 1939-1946 1/2 & 3/4 Ton Commercial Models (JC, JD, JE, KC, KD, KE, AK, AL, AM, BK, BL, BM, CK, DP, DR, DS) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a pair of Rear Leaf Spring Assemblies for 1941-1955 Chevrolet & GMC (1st Series) 3/4 Ton Trucks (exc. D-D). New assemblies made in the USA. 7-Leaf Springs - 2-Stage Spring (4/3). Ready to install. Replaces GM# 3656559 Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1957 Chevrolet 6-Passenger Station Wagons that have 5-leaf rear springs. They replace GM# 3734002 Specific Applications: 1957 Chevrolet 6-Passenger Station Wagon; 1957 Chevrolet Passenger cars (Heavy Duty) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
In 1955, used on 2nd Series only. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a pair of REAR leaf springs for 1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks. Each spring assembly comes with a smooth bushing pressed into the spring hanger end and a threaded bushing pressed into the shackle end. These are 8-leaf springs. Replaces GM# 3708462 This item will have special freight charges. Call or email us for a freight quote.
In 1955, used on 1st Series only. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1925-1927 Chevrolet Roadster & Coupe. They are a 7-leaf spring and are sold in pairs. Replaces GM# 349388 Specific Applications: 1925-1927 Roadsters & Coupes - Series K, V, AA NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
In 1955, used on 1st Series only. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
In 1955, used on 2nd Series. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
In 1955, used on 2nd Series only. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT Leaf Springs are for 1941-1946 Chevrolet & GMC 3/4 Ton Trucks. They are a 8-leaf spring, 2-stage spring and are sold in pairs. Dimensions: 1-3/4" Wide x 36" Long. Replaces GM# 3656610 Specific Applications: 1941-1946 3/4 Ton Commercial Models (AL, AM, BL, BM, DR) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
STANDARD EYE,4"DROP THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
REVERSE EYE,5-1/2"DROP THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
In 1955, used on 1st Series only. THESE MONO LEAF SPRINGS MEET OR EXCEED MULTI-LEAF SPECIFICATIONS AND ARE ONLY 3/4" THICK. THEY PROVIDE SUPERIOR RIDE AND IMPROVED HANDLING, AND WILL LOWER RIDE HEIGHT. THESE SPRINGS FIT INTO THE ORIGINAL SHACKLES AND ARE EASY TO INSTALL. SPRING KIT COMES WITH BUSHINGS AND U-BOLTS. NEW PINS AND SHACKLES NOT INCLUDED. THIS PART IS EXTRA HEAVY AND IS SUBJECT TO AN ADDITIONAL DELIVERY FEE.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1967-1972 Chevrolet 4-Wheel Drive trucks that have 2-leaf front springs. Replaces GM# 328790, 6272499 Specific Applications: 1967-1968 K-10 & K-20 4WD (exc. H.D.) - 1/2 & 3/4 Ton Trucks; 1969-1972 K-10, K-20, Blazer K-Series 4WD (exc. H.D.) - 1/2 & 3/4 Ton Trucks Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1929-1933 Chevrolet trucks that have 8-leaf front springs. Replaces GM# 358363 Specific Applications: 1929 Chevrolet Passenger (Heavy Duty) with 8 Leaf Springs; 1929-1933 All Trucks SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These rear leaf springs are for all 1940-1948 Chevrolet passenger cars. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 605383 Specific Applications: 1940-1948 Sedan, Town Sedan, Sport Sedan, Coupe & Coupe Pickup; 1940-1948 2 & 4 Pass. Coupe & Cabriolet w/18" Wheels or 16" Wheels with Heavy Springs Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1940 Chevrolet Master 85 passenger cars with straight axle including Sedan Delivery. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 3653541 Specific Applications: 1940 Master 85 Passenger Model KB including Sedan Delivery Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These REAR leaf spring assemblies fit all 1936 Standard Sedan & Coach, also fits Coupe with 19" wheels. This part is extra heavy and is subject to an additional delivery fee.
These are new replacement leaf springs, made to original specifications here in the USA! This set of springs fits 1938 & 1939 Chevrolet passenger cars. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 597143, 599986 Specific Applications: 1938 Coupe, Sport Coupe & Cabriolet - Series HA & HB; 1939 Coupe & 4-Pass Coupe - Series JA & JB Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of springs fits 1938 Chevrolet passenger cars. They are an 8-leaf spring (no covers) and are sold in pairs. Springs come with bushings installed in front and rear. Replaces GM# 597142 Specific Applications: 1938 Sedan, Coach, Town Sedan, Sport Sedan, Coupe Pickup - Series HA, HB - Master & Master Deluxe; 1938 Coupe, Cabriolet (with 18" Wheels) - Series HB - Master Leaf springs are extra heavy and special freight charges will apply. Call or e-mail us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These rear leaf springs are for all 1939 Chevrolet passenger cars and are made in the USA. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 599983 Specific Applications: 1939 Master Deluxe & Master 85 - Sedan, Coach (2dr. Sedan), Town Sedan, & Sport Sedan - Series JA, JB; 1939 Master 85 Coupe (8-leaf), Coupe Pickup Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These rear leaf springs are for all 1940-1948 Chevrolet Coupe & Cabriolet. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 604598, 605374 Specific Applications: 1940 Cabriolet w/16" Wheels - Series KA; 1940 Coupe & 4-Pass Coupe - Series KA; 1940 Coupe - Series KB, KH; 1941-1948 Coupe & Cabriolet (Exc. Coupe Pickup); 1948 Town Sedan; Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
These are new replacement leaf springs, made to original specifications here in the USA! These rear leaf springs are for all 1949-1953 Chevrolet Business Coupes. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 3692293, 3697914 Specific Applications: 1949-1953 Chevrolet Business Coupe Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These rear leaf springs are for all 1949-1954 Chevrolet Passenger cars (exc. Business Coupe, Sedan Delivery or Station Wagon). They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 3704154, 3697663. Specific Applications: 1949-1953 Passenger cars (exc. Business Coupe, Sedan Delivery, Station Wagon); 1954 Passenger cars (exc. Sedan Delivery, Station Wagon) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1936 Chevrolet Standard passenger cars (exc. Sedan Delivery). They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 476065 Specific Applications: 1936 Chevrolet Standard Passenger Model FC (exc. Sedan Delivery) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1939 Chevrolet Master 85 passenger cars with straight axle including Sedan Delivery. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 350225 Specific Applications: 1939 Master 85 Passenger Model JB including Sedan Delivery Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for all 1930-1935 Chevrolet passenger cars. They are an 7-leaf spring and are sold in pairs. Springs come with bushings installed in the frame end. Order tapered shackle pin RW-39 separately and these can be installed when the springs are manufactured. Replaces GM# 475017 Specific Applications: 1930 Sedan & Sedan Delivery, 1931-32 all passenger, 1933 Standard passenger, 1933 Master Phaeton, Roadster, Coupe & Cabriolet, 1934-35 Standard Phaeton, Roadster, Coupe, Coach & Sedan. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit all 1957 Chevrolet 9-Passenger Station Wagons that have 6-leaf rear springs. They replace GM# 3734010 Specific Applications: 1957 Chevrolet 9-Passenger Station Wagon; 1957 Chevrolet Passenger cars (Extra Heavy Duty) Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1930-1933 Chevrolet passenger cars that have 7-leaf front springs. Replaces GM# 366967. Dimensions: center bolt to center of eye is 19-1/16 & 17-1/16 inches following the arch of the spring. Height of arch is 2.75 inches. Specific Applications: 1930-1933 Passenger (exc. Special Sedan, Town Sedan, Coach with Fender Wells) - Models AD, AE, BA, CA SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for 1949-1954 Chevrolet Station Wagons that have 8-leaf REAR springs - REGULAR. Replaces GM# 3697926 Specific Applications: 1949-1954 Station Wagon with Regular Springs Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for 1949-1954 Chevrolet Station Wagons that have 8-leaf REAR springs - HEAVY DUTY. Replaces GM# 3697919 Specific Applications: 1949-1954 Station Wagon with Heavy Duty Springs Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1934-1936 Chevrolet Master Roadster, Coupe & Cabriolet. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 475259 Specific Applications: 1934 Master Sport Roadster (with Rumble Seat) - Model DA; 1934 Master Cabriolet, Coupe & Sport Coupe - Model DA; 1935-1936 Master Coupe & Sport Coupe - Models EA, ED, FA,FD Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1928-1929 Chevrolet Roadster & Coupe. They are a 6-leaf spring and are sold in pairs. Replaces GM#352454 Specific Applications: 1928-1929 Roadster & Coupe - Series AB, AC NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1928-1929 Chevrolet Touring & Cabriolet. They are a 7-leaf spring and are sold in pairs. Replaces GM#352453 Specific Applications: 1928-1929 Touring & Cabriolet - Series AB, AC NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for all 1930-1935 Chevrolet passenger cars that have 8-leaf rear springs. Eye-to eye measurement (along the curvature) is 54-1/8" O.C. Replaces GM# 357375, 369099 Specific Applications: 1930 Sedan, Club Sedan, Coach & Sedan Delivery; 1931-1932 Phaeton, Sedan, Special Sedan, Landau Phaeton, Cabriolet, Coupe, Coach & Sedan Delivery; 1933 Master: Phaeton, Sport Roadster, Sport Coupe, Cabriolet; 1933-1935 Standard passenger (except Sedan, Coach or Sedan Delivery) For 1931-1932 Models with Accessory Extension Trunk - See FS-828 for Heavy Duty Springs SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1937-1938 Chevrolet Master passenger cars with straight axle (exc. Sedan Delivery). They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 593688 Specific Applications: 1936 Chevrolet Standard Passenger Model FC (exc. Sedan Delivery); 1937-1938 Master Passenger Models GB, HB (exc. Sedan Delivery), including Cabriolet Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1930-1933 Chevrolet passenger cars & 1/2 ton panel trucks that have 8-leaf front springs. Replaces GM# 365172 Specific Applications: 1930-1932 Special Sedan, Town Sedan, Coach with Fender Wells - Models AD, AE, BA; 1930-1933 All models with Fender Mounted Spare Tires; 1932 De Luxe 1/2 Ton Models; 1933 1/2 Ton Panel Truck - Model CB SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of springs fits 1936 & 1937 Chevrolet passenger cars. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 594438. Specific Applications: 1936 Standard Coupe & Cabriolet; 1937 Coupes - Models GA & GB Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1934-1936 Chevrolet Master 4-Door Sedans. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 376123 Specific Applications: 1934-1936 Master Sedan & Sport Sedan - Models DA,EA,ED,FA,FD Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1937-1938 Chevrolet Sedan Delivery and Passenger models with 18" wheels. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 594551 Specific Applications: 1937-1938 Sedan Delivery, Also Passenger Models with 18" Wheels Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs fit 1934-1935 Chevrolet Standard passenger cars that have 8-leaf rear springs. They replace GM# 378474 Specific Applications: 1934-1935 Standard Sedan & Coach (2 & 4 Dr. Sedans) SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of springs fits 1934-1935 Chevrolet Master passenger cars. They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 376121 Specific Applications: 1934-1935 Master Sport Roadster, Coupes, Cabriolet Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of REAR springs fits 1934-1936 Chevrolet Master 2-Dr. Sedan (Coach). They are an 8-leaf spring (no covers) and are sold in pairs. Replaces GM# 376122 Specific Applications: 1934-1936 Master Coach & 2-Door Town Sedan - Models DA,EA,ED,FA,FD Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of FRONT springs fits 1935-1936 Chevrolet Master passenger cars without Knee Action suspension. They are a 7-leaf spring (no covers) and are sold in pairs. Replaces GM# 374967, 592475 SPECIAL NOTE WHEN ORDERING: Specify both spring eyes above #1 leaf (374967) OR front spring eye above and rear eye below #1 leaf (592475) Specific Applications: 1935-1936 Master models without Knee Action Shocks - Models ED,FD Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1928-1929 Chevrolet passenger cars & 1/2 Ton Trucks that have 7-leaf FRONT springs. Replaces GM# 352452 Specific Applications: 1928-1929 Passenger cars, Light Delivery & 1/2 Ton Trucks NOTE: Some early springs had small curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for 1928-1929 Chevrolet passenger cars that have 8-leaf REAR springs. Replaces GM# 352460 Specific Applications: 1928-1929 Coach, Sedan, Landau, Sedan Delivery NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! This set of FRONT springs fits all 1933-1935 Chevrolet Standard passenger cars. They are a 7-leaf spring (no covers) and are sold in pairs. Springs come with bushings installed in the frame end. Order tapered shackle pin RW-39 separately and these can be installed when the springs are manufactured. Replaces GM# 375181 Specific Applications: 1933-1935 Standard Passenger cars (exc. 19" Wheels) Dimensions: Center bolt to center of eye is 16.5 inches following the arch of the spring in both directions. Height of arch is 2.75 inches. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for all 1926-1933 Chevrolet 1/2 Ton Trucks that have 8-leaf rear springs. Eye-to eye measurement (along the curvature) is 54-1/8" O.C. Replaces GM# 344477 Specific Applications: 1926 Superior K & V - Light Delivery; 1927 Capitol - Light Delivery; 1928 National - Light Delivery; 1929-1933 1/2 Ton Trucks - Models AC, AD, AE, BB, CB 1931-1932 Passenger Models with Accessory Extension Trunk, which requires heavier springs. SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
This is a pair of rear leaf spring assemblies for 1953-1955 Chevrolet & GMC (1st Series) 3/4 Ton Trucks. New assemblies made in the USA. 8-Leaf Springs - 2-Stage Spring. Ready to install. Replaces GM# 3702624 Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
This is a pair of rear leaf spring assemblies for 1953-1955 Chevrolet & GMC (1st Series) 3/4 Ton Trucks. New assemblies made in the USA. 8-Leaf Springs - 2-Stage Spring. Ready to install. Replaces GM# 3693624 Specific Applications: 1941-1952 3/4 & 1 Ton Trucks; 1953-1954 1 Ton Trucks Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a slotted (castle) NUT for the FRONT & REAR spring bolt for 1925-1934 Chevrolet cars & trucks. Dimensions: 9/16"-18 X 7/8" Hex X .61" Tall. Use with FS-671 Bolt & FS-672 Bushing. 1925-1929 vehicles - 12 nuts required per vehicle. 1929-1935 vehicles - up to 4 nuts required per vehicle. Replaces GM# 119255 Specific Applications: 1925-1935 Passenger & Truck (exc. 1934-1935 Master) - FRONT; 1925-1935 Passenger & 1/2 Ton Truck (exc. 1934-1935 Master) - REAR
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
This is a REAR Spring Pin Lock for 1941-1968 Chevrolet & GMC Trucks. Dimensions: 5/16 x 24, 7/16" thick, 2" OL. Replaces GM# 3656671 Specific Applications: 1941-1955 (1st Series) 3/4 & 1 Ton Trucks; 1955-1959 (2nd Series) 1/2, 3/4 & 1 Ton Trucks - Series 3 Commercial; 1960-1966 4WD; 1960-1968 Series 20-30 (D-D); 1967-1968 Series 30 (exc. D-D)
This is a FRONT Spring, Rear Eye Bolt & Bushing for 1941-1959 Chevrolet & GMC Trucks. Bolt Dimensions: 11/16"-16 x 3-15/16". Replaces GM# 3657393. 593992, 3713064 Specific Applications: 1939-1955 COE - Front Spring, Front Hanger; 1941-1955 (1st Series) D-D Trucks - Front Spring, Front Hanger; 1941-1955 (1st Series) 1 Ton & Utility - Front Spring, Rear Hanger; 1955-1959 (2nd Series) 1/2, 3/4, & 1 Ton Trucks; 1960-1964 D-D Trucks (exc. 102 W.B.)
This is a FRONT Spring Bolt & Bushing Kit for one spring. It fits 1934-1936 Chevrolet & GMC cars & trucks. Kit comes with one spring bolt, bushing, lock washer and nut. Bolt Dimensions: 11/16"-16 x 3-1/2". Bushing Dimensions: OD .879" x ID .694" x 1-3/4" Long. Replaces GM# 373200, 379648 Specific Applications: 1934-1936 Chevy & GMC Trucks - All Commercial & Utility - Models DB, P, EB, Q, FD, R - FRONT; 1934-1936 Chevy & GMC 1/2 Ton Trucks - Models DB, EB, FB - REAR: 1935-1936 Master Passenger with Straight Axle - Models ED, FD
This is a spring bolt & bushing for all 1934-1955 (1st Series) Chevrolet & GMC trucks. In 1955, used on 1st Series Only. Bolt Dimensions: 11/16-16 x 3-3/8" for 1-3/4" wide spring. Bushing dimensions: 1.69" OL; .875" OD; .658" ID. Replaces GM#'s 373200 & 593990 Specific Applications: 1934-1940 All Trucks (exc. COE); 1941-1955 (1st Series) 1/2 & 3/4 Ton FRONT, 1941-1955 (1st Series) 1/2 Ton REAR
This is a spring bolt & bushing kit for all 1934-1954 Chevrolet passenger cars (except 1934-1935 Standard). Kit includes two spring anchor bolts and two inlox bushings for the front of the rear springs. Set of 4 pieces for one car. Replaces GM# 3690790, 751005 Specific Applications: 1934-35: All Master Series passenger; 1936-54: All passenger
This FRONT spring bolt fits all Chevrolet passenger cars with straight axles. It anchors the front of the front spring to the frame. Two required per car. See also TB-6 for the bushing in the spring. Replaces GM# 477258 Specific Applications: 1936-1940 Passenger - Models FC, GB, HB, JB, KB
This is a Spring Bushing for Front Spring Front Hanger & Rear Spring Rear Hanger - Screw Type for threaded shackle pins. Bushing is 1-3/4" Long. OL, OD .87", ID .59" with internal threads. Use with P-199 Spring Shackle Pin. Specific Applications: 1934-1948 Passenger; 1934-1955(1st Series) 1/2 Ton Trucks
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a Spring Eye Bushing for 1939-1967 Chevrolet & GMC Trucks. Bushing Dimensions: 0.875" OD x 0.685" ID x 1.940" Long. Replaces GM# 3707134 Specific Applications: 1939-1940 Cab Over Engine (COE) - FRONT; 1941-1955 (1st Series) D-D, 1 Ton & 1-1/2 Ton - FRONT; 1955-1959 (2nd Series) Series 3 - 1/2 thru 1 Ton - FRONT; 1955-1959 (2nd Series) 1/2 & 3/4 Ton (exc D-D) - REAR; 1960-1964 D-D (exc 102" WB) - FRONT; 1963 Series 30 (D-D) w. H.D. Springs - FRONT; 1967 Series 20-30 (D-D) - FRONT & REAR
This is a REAR Spring Eye Bushing for 1933-1955 (1st Series) Chevrolet & GMC Utility (1-1/2 & 2 Ton) trucks. 4 bushings required per vehicle. Dimensions: 1.000" OD (25.4mm) x .877" (22.27mm) ID x .877" (22.27mm) OL. Replaces GM# 369721 Specific Applications: 1933-1955 (1st Series) Chevrolet & GMC Utility
This spring bushing fits 1925-1935 Chevrolet cars & trucks. It is a bronze bushing 3/4" OD x 1-11/16" long. It is used to mount the leaf springs on front and rear. Note: 1925-1929 models use BOTH FS-639 (11/16" OD) & FS-672 (3/4" OD) - measure before ordering. Replaces GM# 344277. Specific Applications: 1925-1933 Passenger & Truck, 1934-1935 Standard - FRONT; 1925-1933 Passenger & 1/2 Ton Truck, 1934-1935 Standard - REAR; 1930-1933 & 1934-1935 Standard require 4 each. 1925-1929 models see also FS-639 for 11/16" OD bushing. See FS-671 for bolt and FS-510 for nut.
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
This bronze bushing is 9/16" ID x 11/16" OD x 1-11/16" long. 1925-1929 Chevrolet car & truck models use both FS-639 (11/16" OD) & FS-672 (3/4" OD) - measure before ordering; See FS-671 for bolt and FS-510 for nut. 1925-29 models see also FS-672 for 3/4" OD bushing.
For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks