This is a 12 Volt LED reflector for the tail light on 1949-1950 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). This assembly has a 5-LED red reflex lens with spring strap underneath. 2 wire hook up. Two required per vehicle. Replaces GM# 5938323
This is a 12 Volt red 5-LED reflector for the tail light on 1951-1952 & 1956 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). Two required per vehicle. Reflector comes with a threaded stud on the back for mounting and a two wire hook up. Dimensions: OD =1-7/16" (1.445î/36.7 mm). Replaces GM# 5943455
This is a Ford Teardrop Tail Light Assembly with red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
This is a plastic red LED tail light lens for all 1953 Chevrolet passenger cars - UPPER lens. 2 required per car. The 12-volt LED lens has 26 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 Plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Replaces GM# 5943403
This is a 12-Volt LED PLASTIC tail light lens for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs for Tail Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This plastic outer red LED tail light lens fits all 1956 Chevrolet passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5947161
This is a plastic LED CENTER tail light lens all 1953 Chevrolet passenger cars. 2 required per car. The 12-volt LED lens has 40 Super Bright Red LEDs. Stop - Tail - Turn Signal functions. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Replaces GM# 5943406
This is an LED tail light lens for all 1951-1952 Chevrolet passenger cars. It is a 12 volt unit with super bright LEDs. The lens electronics are fully sealed with epoxy coating. Each unit comes with #1157 plug to make installation easy. Solid state circuit boads are designed for 7.7-14.0 volts, DC. Replaces GM# 5940038
This is a plastic LED CENTER tail light lens 1962 Chevrolet Impala passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5953731
This is a RED plastic LED Tail Light Lens for 1963 Chevrolet Impala passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5954186, 5954191
This tail light lens fits all 1967-1972 Chevrolet & GMC Fleetside pickups. The 12-volt LED lens has 20 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 Plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per truck. Replaces GM# 5959111
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a plastic 12-Volt LED tail light lens for all 1949-1950 Chevrolet passenger cars. This lens is the 1949 design flat lens, but will fit all 1950 models as well. 2 required per car. Lens has 16 Super Bright Red LEDs, complete with Polycarbonate Lens. It is epoxy coated, fully sealed electronics with #1157 plug and play connection. Replaces GM# 5937861, 5939421 Features: * 16 Super Bright Red LED with high quality injection molded polycarbonate lens * Epoxy coated, fully sealed electronics * Easy wiring with hard wired 1157 double contact plug * Energy efficient solid-state circuit board engineered for 12V DC systems
This is a 12-Volt Polycarbonate LED Tail Light Lens for 1939-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920696. Features: * Super bright red LED with high quality injection molded polycarbonate lens * Epoxy coated, fully sealed electronics * Easy wiring with hard wired 1157 double contact plug * Energy efficient solid-state circuit board engineered for 12V DC systems Specific Applications: 1939 All Passenger Cars; 1940-1948 Sedan Delivery (with dual tail lights); 1947-1953 Panel Trucks & Suburban (with dual high mounted tail lights); 1949-1952 Station Wagon (with dual tail lights)
This 12 Volt LED tail light lens fits all 1940 Chevrolet passenger cars except, Sedan Delivery, and Coupe Pickup. It mounts into the original tail light housing and comes with 22 Super Bright Red LEDs. The lens is completely sealed Polycarbonate and is epoxy coated for fully sealed electronics. Wired with an 1157 plug for "plug & play" installation. Fits left or right. Replaces GM# 5930213, 5930214
This plastic red LED tail light lens fits all 1960-1961 Chevrolet passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5951078
This plastic outer red LED tail light lens fits all 1957 Chevrolet passenger cars. It has 51 Super Bright LEDs. It is Epoxy Coated, Fully Sealed Electronics with #1157 Plug. Solid State Circuit Board 7.7 to 14.0 Volts DC. Two required per car. Dimensions: 1-7/8" x 4-3/8". Replaces GM# 5948104
This is a SEQUENTIAL 12-Volt LED PLASTIC tail light lens for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs Features Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF as well as Sequential Once Brake Attention Function. Function. Recommended upgrade under dash flasher to FS-250A LED flasher. Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a 12-Volt replacement LED tail light lens for 1954-1959 Chevrolet & GMC Stepside Trucks. Simple to install, this lens has a plug & play end that mounts directly to your original tail light socket for the original #1157 bulb. The lens has 29 Super Bright Red LED's that are fully sealed, epoxy coated electronics. Lens is 3-1/2" outside diameter. Replaces GM# 5938745, 5947580 Note: Use as a replacement on 1954-1955 (1st Series) trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a plastic LED tail light lens for 1958-1959 Chevrolet & GMC Fleetside pickup trucks. It has 41 Super Bright LEDs. It is Epoxy Coated, Fully Sealed Electronics with #1157 Plug. Solid State Circuit Board 7.7 to 14.0 Volts DC. Two required per truck. Replaces GM# 5952686
This is a plastic LED tail light lens for all 1954 Chevrolet passenger cars. 2 required per car. Lens has 40 Super Bright Red LEDs, complete with Polycarbonate Lens. It is epoxy coated, fully sealed electronics with #1157 plug and play connection. Replaces GM# 5941679
This is a LED tail light lens for 1960-1966 Chevrolet & GMC Stepside pickups. Each lens comes with a plug that pushes into the original tail light bulb socket so there is no complicated wiring necessary. Replaces GM# 5952828 Features: 41 Super Bright Red LEDs with Red Lens Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics, 1157 Plug Solid State Circuit Boards are Designed for 7.7-14.0 VDC
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a red plastic LED tail light lens for 1960-1966 Chevrolet & GMC Fleetside pickup trucks. Also fits 1964-1966 G-10 Van. It has 40 Super Bright LEDs. It is Epoxy Coated, Fully Sealed Electronics with #1157 Plug. Solid State Circuit Board 7.7 to 14.0 Volts DC. Two required per truck. WITHOUT Chevy Bowtie. Replaces GM# 5952677
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This plastic outer red LED tail light lens fits all 1955 Chevrolet passenger cars. The 12-volt LED lens has 60 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 Plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5945878
This is a RED plastic LED Tail Light Lens for 1964 Chevrolet Full Size passenger cars (exc Station Wagon). The 12-volt LED lens has 41 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Comes with #1157 plug for quick and easy installation. Replaces GM# 5955333, 5955340
1967-1972 Chevrolet & GMC Stepside Pickup LED Tail Light Lens. Each lens comes with a plug that pushes into the original tail light bulb socket so there is no complicated wiring necessary. Replaces GM# 5956481 Features: 41 Super Bright Red LEDs with Red Lens Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics, 1157 Plug Solid State Circuit Boards are Designed for 7.7-14.0 VDC
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Ford Teardrop Tail Light Assembly with Blue Dot installed in the red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
LED Tail light lens with "CHEVROLET" script for all 1933-1936 Chevrolet passenger cars. Specific Applications: 1933-1935 Passenger - Fits Left or Right 1936 Passenger - Fits Right Only 30 Super Bright Red LEDs with Red Lens Easily Installs in Your Original Housing with 1156 Plugs Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Licensed by General Motors
This LED tail light lens with Blue Dot fits all 1937 & 1938 Chevrolet passenger cars, also 1940-1953 Chevrolet & GMC trucks. Left side lens comes with license lens with 6 white LED's. Right side has no license lens. The red lens is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 22 super bright red LED's with Blue Dot installed. SPECIFY RIGHT OR LEFT WHEN ORDERING. Features: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Solid State Circuit Boards are designed for 7.7-14.0 volts DC Replaces GM# 920626, 920696, 5937162
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a 12-Volt LED PLASTIC tail light lens - with CLEAR LICENSE LENS for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs for Tail 6 Super White LEDs for License Complete with Polycarbonate Lens Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 36 super bright red LED's with Blue Dot installed: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). * Will fit Left or Right
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks
This SEQUENTIAL LED tail light lens fits 1955-1959 Chevrolet and GMC Stepside trucks. In 1955 fits second series only. This 12 volt lens assembly includes 29 super bright red led bulbs on a fully sealed, epoxy coated solid state circuit board. This lens comes complete with a double connector with offset pins to plug into your existing tail light socket. Requires use of turn signal flasher FS-250A, sold separately.
This is a SEQUENTIAL 12-Volt LED PLASTIC tail light lens - with CLEAR LICENSE LENS for 1937-1953 Chevrolet & GMC cars & trucks. Replaces GM# 920626,, 920696, 5937162 Features: 27 Super Bright Red LEDs and 6 Super White LEDs for License light. Features Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF as well as Sequential Once Brake Attention Function. Function. Recommended upgrade under dash flasher to FS-250A LED flasher. Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach; 1939-1940 Station Wagon; 1939-1952 Coupe Pickup, Sedan Delivery; 1940-1946 All Trucks; 1947-1948 Trucks - Models EP,ER,QL,QX,FP,FR,RL,RX (exc. Panel); 1949-1953 All Commercial
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a SEQUENTIAL flashing tail light lens for all 1967-1972 Chevrolet & GMC Fleetside pickups. Replaces GM# 5959111 FEATURES: * 20 Super Bright LED's * Features Sequential Operation with Selector Switch for: Sequential LEFT, Sequential RIGHT or Sequential Function Off. * Features "Sequence" Brake Attention Function * Complete with Polycarbonate Lens and LED's Sealed Inside * Easy Electrical Connection with #1157 Plug * Lifetime Warranty NOTE: Requires use of FS-250A Electronic Flasher
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This complete LEFT SIDE LED Tail Light Assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Replaces GM# 927565. Comes with stainless rim and black housing . Specify right or left when ordering. LED units are 12 volt and have 39 Super Bright Red LED's. Each lens is epoxy coated and has fully sealed electronics. Solid state circuit boards are designed for 7.7-14.0 volts DC
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a 6-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! 6-Volt version has 60 Super Bright RED LEDs, plus two White LEDs for the license light. Bolts into original or our reproduction tail light housings. Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 60 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens & hooking up the wires! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. These will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This is a 12-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 56 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. They will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This complete RIGHT SIDE LED Tail Light Assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Replaces GM# 927566. Comes with stainless rim and black housing . Specify right or left when ordering. LED units are 12 volt and have 39 Super Bright Red LED's. Each lens is epoxy coated and has fully sealed electronics. Solid state circuit boards are designed for 7.7-14.0 volts DC
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a BLACK LED Tail Light Assembly for 1960-1966 Chevrolet & GMC Stepside Pickups. The 12-volt LED lens has Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per truck. Replaces GM# 910560
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a STAINLESS LED Tail Light Assembly for 1960-1966 Chevrolet & GMC Stepside Pickups. The 12-volt LED lens has Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics with #1157 plug. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per truck. Replaces GM# 910560
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a complete BLACK LED tail light assembly for 1955-1959 Chevrolet & GMC trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs. Replaces GM# 898199, 899914
This LED tail light lens with Blue Dot fits all 1937 & 1938 Chevrolet passenger cars, also 1940-1953 Chevrolet & GMC trucks. Left side lens comes with license lens with 6 white LED's. Right side has no license lens. The red lens is a new 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each lens has 22 super bright red LED's with Blue Dot installed. SPECIFY RIGHT OR LEFT WHEN ORDERING. Features: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Blue Dot with chrome rim looks exactly like originals from the '50's * Solid State Circuit Boards are designed for 7.7-14.0 volts DC Replaces GM# 920626, 920696, 5937162
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a 12 Volt LED Lens for 1938-1939 Ford tail lights. Features: *New lens design is same size and shape as original Ford lens. *Super bright LED with high quality injection molded polycarbonate lens. *Dual function with tail light and bright stop/turn signal. *Lens fits all original & reproduction 1938-39 Ford tail lights. *Easy electrical connection with 1157 plug, no modification to vehicle. *Fits L/H or R/H side.
This complete LED FLUSH MOUNT tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Comes with 12 volt LED Lens with BLUE DOT. Fits Left or Right side. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Stainless Steel Rim and mounting pad. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). FLUSH MOUNT FITS RIGHT OR LEFT.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This SEQUENTIAL tail light LED lens fits 1960-1966 Chevrolet and GMC FLEETSIDE trucks. This 12 volt lens assembly includes 40 super bright red led bulbs on a fully sealed, epoxy coated solid state circuit board. This lens comes complete with a double connector with offset pins to plug into your existing tail light socket. Requires use of turn signal flasher FS-250A, sold separately.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a complete STAINLESS LED tail light assembly for 1954-1959 Chevrolet & GMC trucks. Fits Left or Right. Correct for 1955-1959 but will fit 1954-1955 (1st Series). This light has 29 Super Bright LEDs. Replaces GM# 898199, 899914
This is a universal replacement LED tail light assembly for 1973-1987 Chevrolet & GMC Stepside trucks. Left side has LED license light, right side has no license light. 3-1/4" diameter, mounting studs with 2" triangular pattern. 29/35 diodes, combination stop, tail and back-up light with integral reflex. Specify Right or Left when ordering. Replaces GM# 370868
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This is a 1950's Pontiac RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. The lens has 41 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed for 12-VDC systems. It has a chrome plated bezel and mounts to a flat surface. Dimensions: Lens OD 3-5/16", Bezel OD 4-5/16". Flush Mount.
12 VOLT. BLACK HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
12 VOLT. BLACK HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A CLEAR LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
This is a complete LED tail light assembly - BLACK with CHROME RIM - for the RIGHT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 985608, 986299 Features: * 45 Super Bright Red LEDs for Tail * Complete with Polycarbonate Lens
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This complete LEFT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. Comes with 12 volt LED Lens with BLUE DOT. Specify right or left when ordering. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Black housing with stainless steel rim and mounting pad. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included).
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This complete RIGHT SIDE tail light assembly fits all 1941-1948 Chevrolet passenger cars (except Fleetline 4-door, Sedan Delivery and Station Wagon). Stainless rim with black housing. Comes with 12 volt LED Lens with BLUE DOT. Specify right or left when ordering. Replaces GM# 927117, 927565 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 36 super bright red LED's with Blue Dot. Complete assemblies include: * Polycarbonate, epoxy coated, sealed LED lens with Blue Dot installed. * Black housing with stainless steel rim and mounting pad. * Blue Dot with chrome rim looks exactly like originals from the '50's * Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included).
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This 12-VOLT LED Tail Light Assembly fits all 1940 Chevrolet passenger cars (exc Sedan Delivery or Coupe Pickup). It mounts into the original position on the body and comes with 17 Super Bright Red LEDs. The lens is completely sealed Polycarbonate and is epoxy coated for fully sealed electronics with #1157 plug. Ready to install with a 304 stainless rim, black housing, socket and mounting hardware. Fits left or right by reversing the lens. GM# 927067, 927068, 927069, 927070
This 12 Volt sequential LED tail light assembly fits all 1940-1953 Chevrolet and GMC trucks. BLACK housing with CHROME RIM - for the RIGHT side. Replaces GM# 985608, 986299 Features: * 27 Super Bright Red LEDs * 6 Super White LEDs for License Plate (Left Side Only) * Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF * Sequential Once Brake Attention Function * Available in Black, Stainless Steel or Chrome Housing * Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - RIGHT - BLACK housing with CHROME RIM. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
This is a complete BLACK SEQUENTIAL LED tail light assembly for 1955-1959 Chevrolet & GMC Stepside trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs and includes a selector switch to control sequential function off, direction left or direction right. This assembly also features a brake attention option with a sequential-once function. Replaces GM# 898199, 899914 Note: Can be used on 1954-1955 (1st Series) Stepside trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a complete LED tail light assembly - STAINLESS with STAINLESS RIM - for the RIGHT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 985608, 986299 Features: * 45 Super Bright Red LEDs for Tail * Complete with Polycarbonate Lens
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a universal replacement LED tail light assembly for 1973-1987 Chevrolet & GMC Stepside trucks. Left side has LED license light, right side has no license light. 3-1/4" diameter, mounting studs with 2" triangular pattern. 29/35 diodes, combination stop, tail and back-up light with integral reflex. Specify Right or Left when ordering. Replaces GM# 370868
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
This 12 Volt sequential LED tail light assembly fits all 1940-1953 Chevrolet and GMC trucks. STAINLESS housing with STAINLESS RIM - for the RIGHT side. Replaces GM# 985608, 986299 Features: * 27 Super Bright Red LEDs * 6 Super White LEDs for License Plate (Left Side Only) * Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF * Sequential Once Brake Attention Function * Available in Black, Stainless Steel or Chrome Housing * Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
1959 Cadillac Tail Light Assembly with Chrome Ring and Base. * 40 Super Bright LED's * Epoxy Coated, Fully Sealed Electronics with 1157 Plug * 3 Wires (1 Wire with Ring Terminal)
ITEM IS DISCONTINUED BY OUR SUPPLIER. AVAILABILITY IS LIMITED TO STOCK ON HAND. This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - LEFT - BLACK with CHROME RIM, LED LENS WITH BLUE DOT. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a complete 12-Volt LED tail light assembly - BLACK with CHROME RIM - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 Features: * 45 Super Bright Red LEDs for Tail * 6 Super White LEDs for License * Complete with Polycarbonate Lens
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
12 VOLT. BLACK HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
12 VOLT. BLACK HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete LED Tail Light Assembly - BLACK with CHROME RIM & BLUE DOT - for the RIGHT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 985608, 986299 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger vehicles. STAINLESS STEEL housing. RIGHT side. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
12 VOLT. CHROME HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
12 VOLT. CHROME HOUSING WITH A CHROME RIM. 16 RED LEDS WITH A RED LENS FOR THE TAILLIGHT AND 6 WHITE LEDS WITH A CLEAR LENS FOR THE LICENSE PLATE LIGHT. EPOXY COATED, FULLY SEALED ELECTRONICS.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete 12 Volt LED tail light assembly with STAINLESS Bezel for 1949-1950 Chevrolet passenger cars. The flat plastic lens is correct for 1949 but works as a replacement for 1950. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Stamped Stainless Steel Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
This is a complete 12 Volt LED tail light assembly with STAINLESS Bezel for 1949-1950 Chevrolet passenger cars. The flat plastic lens is correct for 1949 but works as a replacement for 1950. Specify Right or Left when ordering. Replaces GM# 927577, 927578, 927755, 927756 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Stamped Stainless Steel Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
This is a complete 12 Volt SEQUENTIAL LED tail light assembly - BLACK with CHROME RIM - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 Features: * 27 Super Bright Red LEDs * 6 Super White LEDs for License Plate (Left Side Only) * Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF * Sequential Once Brake Attention Function * Available in Black, Stainless Steel or Chrome Housing * Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete 12 Volt LED tail light assembly with CHROME bezel for 1951-1952 Chevrolet passenger cars (exc Sedan Delivery). The assembly includes a polycarbonate lens with sealed electronics and the stock round reflector mounted on the chrome bezel. Fits Right or Left side. Replaces GM# 927883, 927884 Features: * 16 Super Bright Red LED, Complete with Polycarbonate Lens * Epoxy Coated, Fully Sealed Electronics * Chrome Rim * Includes Housing, Mounting Hardware, Round Reflector, Socket and Wires
This is a complete tail light assembly for 1937-1948 Chevrolet passenger cars - RIGHT - STAINLESS with STAINLESS RIM, LED LENS WITH BLUE DOT. Replaces GM# 927511, 916832 Specific Applications: 1937-1938 All Passenger These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
This is a complete LED Tail Light Assembly - STAINLESS with STAINLESS RIM & BLUE DOT - for the RIGHT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 985608, 986299 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 12 Volt sequential LED tail light assembly fits all 1937-1938 Chevrolet passenger cars - LEFT - BLACK housing with CHROME RIM. Replaces GM# 927510, 916741 Specific Applications: 1937-1938 All Passenger; 1939 Sedan & Coach (without Trunks); 1939-1948 Sedan Delivery (with Single Lamp) Includes 27 super bright red LEDs and 6 super white LEDs for license plate light. Features sequential operation with selector switch to select sequential left, sequential right, or sequential function off as well as sequential once brake attention function. Recommended upgrade under dash flasher to FS-250A LED flasher.
This is a complete 12 Volt SEQUENTIAL LED tail light assembly - STAINLESS with STAINLESS RIM - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 Features: * 27 Super Bright Red LEDs * 6 Super White LEDs for License Plate (Left Side Only) * Sequential Operation with Selector Switch to Select Sequential Left, Sequential Right, or Sequential Function OFF * Sequential Once Brake Attention Function * Available in Black, Stainless Steel or Chrome Housing * Recommended upgrade under dash flasher to FS-250A LED flasher.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete 12-Volt LED tail light assembly -STAINLESS with STAINLESS RIM - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 Features: * 45 Super Bright Red LEDs for Tail * 6 Super White LEDs for License * Complete with Polycarbonate Lens * White wire is ground
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This 12-volt LED tail light assembly fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#'s 916877 & 916878. This light comes in chrome with 17 Super Bright LEDs in a polycarbonate lens & chrome rim. Also available in stock light & primer versions. Specify Right or Left when ordering. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
NOTE: THIS ITEM DISCONTINUED BY OUR SUPPLIER. ONLY STOCK ON HAND AVAILABLE. This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in primer with a RED LED with CLEAR lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in primer with a AMBER LED with AMBER lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in CHROME with a AMBER LED with AMBER lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in PRIMER with a AMBER LED with CLEAR lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This tail light fits all 1939 Chevrolet passenger Coupes & models with Trunks; also fits many other models with dual tail lamps. Replaces GM#' 916877, 916878. This light comes in CHROME with a AMBER LED with CLEAR lens & chrome rim. Also available in all chrome versions. Specific Applications: 1939 Passenger: Coupes & Trunk Models; 1940-1948 Sedan Delivery; 1947-1953 Panel Truck & Suburban; 1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a complete LED Tail Light Assembly - BLACK with CHROME RIM & BLUE DOT - for the LEFT SIDE for 1940-1953 Chevrolet & GMC Trucks. Replaces GM# 927074, 927874 These all new tail lights have a 12-volt LED lens with Blue Dot installed for that custom 50's look AND safety! Each tail light has 23 super bright red LED's with Blue Dot. Left side assemblies also have 6 super white LED's for license light. Complete assemblies include Polycarbonate sealed LED lens with Blue Dot installed. Blue Dot lighting can be controlled separately from the tail and stop light functions. In other words, the Blue Dot can be turned on or off independently from the tail light. (requires separate wiring and switch - not included). SPECIFY RIGHT OR LEFT and BLACK OR STAINLESS HOUSING when ordering.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a complete STAINLESS STEEL SEQUENTIAL LED tail light assembly for 1955-1959 Chevrolet & GMC Stepside trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs and includes a selector switch to control sequential function off, direction left or direction right. This assembly also features a brake attention option with a sequential-once function. Replaces GM# 898199, 899914 Note: Can be used on 1954-1955 (1st Series) Stepside trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks