42 Items Found
Exhaust Valves
CHEVROLET 1950-1970 EXHAUST VALVE 6 & 8 CYLINDER
This is an EXHAUST Valve for 1950-1970 Chevrolet passenger cars & trucks with 6 Cylinder & V-8 engines. Dimensions: Two Grooves - Head Dia. 1.500", Overall Length (margin to tip) 4.923", Stem Dia. .341", Seat Angle 45 degrees. Replaces GM# 3731212, 3835639
Specific Applications"
1950-1962 - 235 CID Engines;
1955-1956 - 265 V-8 with hydraulic lifters & 2BBL Carburetor;
1960-1967 - 153 CID Engines;
1962-1969 - 327 CID Engines;
1963-1979 - 292 CID Engines;
1967-1978 - 350 CID Engines
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
CHEVROLET 1941-1949 EXHAUST VALVE - 2-GROOVE STEM
This is an Exhaust Valve for all Chevrolet engines from 1941 thru 1949. It has a 30 degree valve angle and replaces GM# 3835318.
Dimensions:
Length (margin to tip): 4.796875
Seat Angle: 30
For 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Cars and Trucks
CHEVROLET 1935-40 EXHAUST VALVE - 6 CYL
This is an Exhaust Valve for 1935-1940 Chevrolet 206 & 216CID engines. Replaces GM# 838717, 839412
Uses "U" shaped key. These valves fit only 30 degree valve seats.
Head Diameter (inches): 1.46875
Stem Diameter (inches): 0.3402Seat Angle: 30
For 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
CHEVROLET 1934 MASTER/1935 ALL EXHAUST VALVES - 6 CYL
This is an Exhaust Valve for all Chevrolet cars & trucks. The valve has a single groove on the valve stem for the keeper. Replaces GM# 837317, 609380. For 45 degree valve seats.
Specific Applications:
1935 All Chevrolet early car & truck engines
Specifications:
Length (margin to tip): 4.625
Seat Angle: 45
For 1934 1935 Chevrolet Cars and Trucks
CHEVROLET 1941-1947 EXHAUST VALVE - SINGLE GROOVE STEM
This is an EXHAUST Valve for 1941-1947 Chevrolet passenger cars & trucks with 6 Cylinder engines. Dimensions: One Groove - Head Dia. 1.46875", Overall Length (margin to tip) 4.6875", Stem Dia. .3402", Seat Angle 60 degrees. Replaces GM# 839412
For 1941 1942 1944 1945 1946 1947 Chevrolet Cars and Trucks
CHEVROLET 1927-1928 INTAKE & EXHAUST VALVES - 4 CYL
Intake & Exhaust Valve for all Chevrolet cars & trucks from Late 1927-1928. In 1927, there was a early series valve used - See AF-404. Compare to your original before ordering.
Head Diameter (inches): 1.65625 (42mm)
Stem Diameter (inches): 0.31Seat Angle: 45
For 1927 1928 Chevrolet Cars and Trucks
CHEVROLET 1915-27 INTAKE & EXHAUST VALVE - 4 CYL
Intake & Exhaust Valve for all Chevrolet cars & trucks from 1915-Early 1927 are the same. In 1927, there was a late series valve used (See AF-405)
Head Diameter (inches): 1.5
Stem Diameter (inches): 0.31
For 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 Chevrolet Cars and Trucks
CHEVROLET 1933 ALL/1934 STD EXHAUST VALVE - 6 CYL
This is an EXHAUST Valve for 1933-1934 Chevrolet cars & trucks. Replaces GM# 836963
Specific Applications:
1934 Standard Model Passenger
Valve Specifications:
Length (margin to tip): 4.765625
Seat Angle: 45
For 1934 Chevrolet Cars and Trucks
CHEVROLET 1930-1931 EXHAUST VALVE - 6 CYL
This EXHAUST valve fits all 1930-1931 Chevrolet cars & trucks.
Head Diameter (inches): 1.34375
Stem Diameter (inches): 0.31Seat Angle: 45
For 1930 1931 Chevrolet Cars and Trucks
Intake And Exhaust Valves
CHEVROLET 1929 NOS INTAKE AND EXHAUST VALVE SET-6 CYL
This is a NOS set of intake and exhaust valves for a 1929 194 CI 6-cyl engine. Comes in original box. It is in very good condition. Only ONE available. These are a set of 12 GM original NOS Valves for both car & truck. GM# 835583
For 1929 Chevrolet Cars and Trucks
Intake Valves
CHEVROLET 1953-1962 235 & 261 INTAKE VALVE
This is an INTAKE Valve for 1953-1962 Chevrolet passenger cars & trucks with 235 & 261 CID engines. Dimensions: Two Grooves - Head Dia. 1.875", Overall Length (margin to tip) 6.281", Stem Dia. .341". Replaces GM# 3815082
Specific Applications"
1954-1962 - 261 CID Engines;
For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1950-1952 INTAKE VALVE - 235 CID ENGINE
This is an INTAKE Valve for 1950-1952 Chevrolet passenger cars & trucks with 235CID engines. Dimensions: Two Grooves - Head Dia. 1.9375", Overall Length (margin to tip) 6.3125", Stem Dia. .341", Seat Angle 30 degrees. Replaces GM# 3835519
For 1950 1951 1952 Chevrolet Cars and Trucks
CHEVROLET 1935-1940 INTAKE VALVE - 6 CYL
This is an Intake Valve for all 1935-1940 Chevrolet cars & trucks. Replaces GM# 838437
Manufacturer's Part#: 838437
Length (margin to tip): 6.015625
Seat Angle: 30
For 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
CHEVROLET 1941-1953 INTAKE VALVE - 2-GROOVE, FLAT HEAD
This is an Intake Valve - 2-Groove with Flat Head - for all Chevrolet engines from 1941 thru 1949. It also fits 1950-1953 All with 216CID engine. It replaces GM# 3688065.
Dimensions:
Length (margin to tip): 6.21875
Seat Angle: 30
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
CHEVROLET 1930-1931 INTAKE VALVE - 6 CYL
This INTAKE valve fits all 1930-1931 Chevrolet cars & trucks.
Head Diameter (inches): 1.453125
Stem Diameter (inches): 0.31Seat Angle: 45
For 1930 1931 Chevrolet Cars and Trucks
CHEVROLET 1934 MASTER/1935 ALL INTAKE VALVES - 6 CYL
This is an Intake Valve for all Chevrolet cars & trucks. The valve has a single groove on the valve stem for the keeper. Replaces GM# 609379. For 45 degree valve seats.
1934 Chevrolet Master passenger cars & trucks;
Manufacturer's Part#: 837316
Length (margin to tip): 5.828125
Seat Angle: 45
For 1934 1935 Chevrolet Cars and Trucks
CHEVROLET 1932 INTAKE VALVE - 6 CYL
This is an EXHAUST Valve for 1933-1934 Chevrolet cars & trucks. Replaces GM# 836963
Specific Applications:
1934 Standard Model Passenger
Valve Specifications:
Length (margin to tip): 4.59375
Seat Angle: 45
For 1932 Chevrolet Cars and Trucks
Pushrods
CHEVROLET 1937-1939 VALVE PUSH ROD - 12-7/8" LONG
This is a reproduction valve push rod for 1937-1939 Chevrolet cars & trucks. Overall length 12-7/8". 12 required per engine. Used on all 216 CID engines. Replaces GM# 838409
For 1937 1938 1939 Chevrolet Cars and Trucks
CHEVROLET USED 1929-1932 VALVE PUSHROD - USED
This is a used pushrod for 1931 & 1932 Chevrolet cars & trucks. It is a functional replacement for all 1929-1932 Chevy engines. Limited quantities available, subject to stock on hand. Overall length 12". Replaces GM# 836393
For 1929 1930 1931 1932 Chevrolet Cars and Trucks
Valve Guides
CHEVROLET 1941-1962 EXHAUST VALVE GUIDE - 6-CYLINDER
This is a replacement EXHAUST Valve Guide for all 1941-1962 Chevrolet cars & trucks with 6-cylinder engines - 216, 235 & 261 CID. Replaces GM# 3688761, 605231.
Dimensions:
Hole Diameter .3435"
IMPORTANT !!! To obtain proper valve stem clearance, valve guides must be finished with a hand reamer after installation in cylinder head.
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1934-1962 INTAKE VALVE GUIDE - 6 CYL
This is a replacement INTAKE Valve Guide for all 1934 Chevrolet Master Models and All 1935-1962 6-Cylinder Chevrolet cars & trucks. Replaces GM# 3688758, 3688760, 3708168
Dimensions:
Hole Diameter .3435"
IMPORTANT !!! To obtain proper valve stem clearance, valve guides must be finished with a hand reamer after installation in cylinder head.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1934-1940 EXHAUST VALVE GUIDE - 6 CYL
This is a replacement Exhaust Valve Guide for 1934 Chevrolet Master Models and All 1935-1940 Chevrolet cars & trucks. Replaces GM# 602978, 3688759
IMPORTANT !!! To obtain proper valve stem clearance, valve guides must be finished with a hand reamer after installation in cylinder head.
For 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
CHEVROLET 1929-33 ALL/1934 STD INT/EX VALVE GUIDE - 6 CYL
This valve guide fits all 1929-1933 Chevrolet cars & trucks; also 1934 Standard passenger models. Used on both intake and exhaust valves. GM# 348965
Fit Diameter: 0.5640"
IMPORTANT !!! To obtain proper valve stem clearance, valve guides must be finished with a hand reamer after installation in cylinder head.
For 1934 Chevrolet Cars and Trucks
Valve Keys
Valve Lifters (Tappets)
CHEVROLET 1929-62 MECHANICAL LIFTER RECROWNING SVC
This is a recrowning service for 1929-1962 Chevrolet mechanical valve lifters (tappets). This is a rebuilding service only. Send in your original lifters and allow 3-4 weeks.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
CHEVROLET 1956-1962 MECHANICAL VALVE LIFTER-6-CYL
This is a solid valve lifter or tappet for all 1956-1962 Chevrolet 235 & 261 CID engines for trucks with 6-cylinder engines. 12 required per engine, sold each. 2-piece - 2-3/16" long. Replaces GM# 5231880, 5231900
For 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1940-1953 VALVE LIFTER OR TAPPET - 216CID
This is a solid valve lifter or tappet for all 1940-1953 Chevrolet 216 CID engines for passenger car or trucks. 12 required per engine, sold each. Replaces GM# 839263
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
CHEVROLET 1929-39 VALVE LIFTERS (TAPPETS) -SET OF 12
These valve lifters (tappets) fit all Chevrolet car & truck engines from 1929-1939.Dimensions: OD = .990" OL 2.310", SINGLE HOLE AT BOTTOM.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
Valve Oiler Felt Pad
CHEVROLET 1926-28 VALVE OILER FELT PAD
This is a rocker arm valve oiler pad for 1926-1928 Chevrolet 4-cylinder engines. Mounts on top of rocker arms. Saturate the pad with engine oil initially, then add oil each time the vehicle is driven. This pad will help keep the rocker arm assembly lubricated properly. Made in the USA!
For 1926 1927 1928 Chevrolet Cars
Valve Spring Cap
CHEVROLET 1929-34 VALVE SPRING CAPS & KEYS
This is a 24 piece set of valve spring caps and flat retainer keys for all 1929-1933 Chevrolet cars & trucks. Also fits all 1934 Standard passenger models. Dimensions: 1.337" OD x .335" Deep. Replaces GM#'s 836117 & 836120.
For 1929 1930 1931 1932 1933 1934 Chevrolet Cars
Valve Springs
CHEVROLET 1954-1963 VALVE SPRING - 12 REQUIRED
This is a new Valve Spring for 1954-1963 Chevrolet cars & trucks with 6-cylinder engines. Sold Each, 12 pieces required. Dimensions: Uninstalled free height 2.210" OL x 1.336" OD, 7 Coils, Compress to 1.528", Pressure Max 168, Pressure Min 158. Replaces GM# 3704142, 3836640
Specific Applications:34
1954-1955 (1st Series) Truck with 261 CID;
1962-1963 All with 261 CID
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
CHEVROLET 1938-1953 VALVE SPRING - 12 REQUIRED
This is a new valve spring for 1938-1953 Chevrolet & GMC cars & trucks with 6-cylinder engines (Except Powerglide). Sold Each, 12 pieces required. Dimensions: Uninstalled free height 2.125" OL x 1.21875" OD, 7-1/2 Coils, Compress to 1.828", Pressure Max 59, Pressure Min 52. Replaces GM# 839304, 3835626
Specific Applications:
1939-1962 GMC with 228, 236, 248, 256, 270, 302 Engines;1953 Sedan Delivery, All Chevy Trucks
For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
CHEVROLET 1959-1962 6-CYL 235 VALVE SPRINGS - SET OF 12
This is a set of New Valve Springs for 1959-1962 Chevrolet cars & trucks with 6-cylinder engines. Sold in a set of 12 pieces. Dimensions: Uninstalled free height 2.235" OL x 1.350" OD, 7-1/2 Coils. Replaces GM# 3758492.
Specific Applications:1959-1962 6-Cylinder 235CID Engines
For 1959 1960 1961 1962 Chevrolet Cars and Trucks
CHEVROLET 1929-33 VALVE SPRINGS - SET OF 12
This is a new set of valve springs for all 1929-1933 Chevrolet cars & trucks. Set of 12 pieces. Dimensions: 1.285" OD x .955" ID x 2.055" Overall Height. Replaces GM# 364912
For 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
CHEVROLET 1916-28 4-CYLINDER VALVE SPRING-SET OF 8
This is a new set of valve springs for 1916-1928 Chevrolet cars & trucks. Set of eight pieces. REPLACES GM#'S 348679, 325684, 326584
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 Chevrolet Cars and Trucks
CHEVROLET 1934-1937 NOS/NORS VALVE SPRINGS
We have found that several aftermarket companies are selling valve springs for this application that are too stiff and can cause pushrods to bend. Our springs are correct for this application. Uninstalled free height: 2.225" OL, 0.975" ID, Wire diameter 0.162"
This is a NOS/NORS set of valve springs for all 1934-1937 Chevrolet cars & trucks (exc. 1934 Standard DC). Set of 12 pieces. Replaces GM# 837365. LIMITED SUPPLY - availability is subject to stock on hand.
For 1934 1935 1936 1937 Chevrolet Cars and Trucks
42 Items Found