This rubber seal is 2" OD x 1" High. It is the replacement seal for the floor under the gas tank on Chevrolet & GMC trucks. This seals the opening where the fuel line goes through the floor.
1947-55 Grommet, fuel filler neck. Through body, INNER, with retaining flange. Replace #3807278. Fits Panel Trucks, Suburbans & Canopy Express. In 1955, used on 1st Series models only. See 60-149 for the outer grommet.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is the OUTER fuel filler neck grommet for 1947-1955 (1st Series) Chevrolet & GMC Panel Trucks, Suburbans & Canopy Express. Oblong fully molded rubber with retaining flange. 3-7/8" outside width x 5-1/8" outside length x 1-1/8" height. 2-1/8" top hole width x 2-3/4" top hole length. 2-1/2" bottom hole width x 3- 9/16" bottom hole length. In 1955, used on 1st Series models only. See 70-1908 for the inner panel grommet. Replaces GM# 3807282
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This fuel filler neck grommet fits 1949-1955 (1st series) Chevrolet & GMC conventional cab trucks. Replaces #3690533. NOT for single unit bodies (panel, Suburban or canopy pickup). Top Quality - Made in the USA!
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
1939-1946 Grommet, fuel filler neck, with proper retaining flange. Oval style. 3-3/4” X 4-1/2” X 3/4. Chevrolet & GMC Pickups, Panels & Suburban's. Made in the USA by Steele Rubber, Inc. Replaces #3800461
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a rubber fuel filler neck grommet for 1934-1935 Chevrolet Passenger Cars. Dimensions: OD 3-5/8", ID 2-1/4". Made in the USA! Replaces GM #377661.
Specific Applications:
1935 Master Coupes only - Models EA, ED
This fuel tank mounting pad set fits 1955-1959 Chevrolet & GMC trucks with fuel tank inside the cab. It includes 4 foam pads as well as a fuel drain spacer. In 1955 fits 2nd series only.
These STAINLESS STEEL gas tank mounting straps fit 1961-1964 Chevrolet passenger vehicles and come with hardware. Does not fit Wagon or Sedan Delivery models.
This is a reproduction of the original type gas tank straps for all 1929-1932 Chevrolet passenger cars. Each set of straps has a threaded stud mounted to one end of the strap and hook end at the other side. Plain steel will require painting before installation. Overall Length is 20 inches.
This is a set of gas tank mounting straps for all 1937-1946 Chevy & GMC trucks that have the tank mounted under the seat in the cab. Not for Panel or Suburban models. Replaces GM# 476972
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is an OEM type reproduction of the gas tank straps for 1947-1948 Chevrolet & GMC trucks. For the tank that mounts under the bed. Replaces GM# 596678
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
These tanks fit in front of the rear axle and made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 Chevrolet Trucks
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
This is a mild steel Gas Tank for 1961-1964 Full Size Chevrolet Passenger Cars (exc. Station Wagon).
This item is Oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel Gas Tank for 1958 Chevrolet passenger cars (exc Station Wagon & Sedan Delivery). Capacity is 16 Gallons. Dimensions: 29-1/4" x 27-3/4" x 7-1/4". These tanks are made out of 16 gauge mild steel. Great replacements for that rusted out original. Replaces GM# 3745848 This item is Oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel Gas Tank for 1959-1960 Chevrolet passenger cars (exc Station Wagon, El Camino & Sedan Delivery). Capacity is 16 Gallons. Dimensions: 29-1/4" x 27-3/4" x 7-1/4". These tanks are made out of 16 gauge mild steel. Great replacements for that rusted out original. Replaces GM# 3775654 This item is Oversize and special freight charges will apply. Call or email us for a freight quote.
16 Gallon Capacity.
Great replacements for that rusted out original. This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.
These tanks are made in mild steel out of 16 gauge steel.This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
This Fuel Tank fits all 1967-1972 Chevrolet & GMC trucks EXCEPT 1970-72 models with Evaporative Emissions Control EEC). Dimensions: 59-3/8" x 7-1/4" x 16-3/4". These tanks are made in mild steel out of 16 gauge steel.
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Fuel Tank fits all 1970-1972 Chevrolet & GMC trucks models WITH Evaporative Emissions Control EEC). Dimensions: 59-3/8" x 7-1/4" x 16-3/4". These tanks are made in mild steel out of 16 gauge steel.
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel gas tank for 1949-1955 (1st Series) Chevrolet & GMC trucks with fuel tank inside the cab. Dimensions: 53" x 12 1/2" x 7". Replaces GM# 3691958, 3708971
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a mild steel fuel tank for 1941-1948 Chevrolet passenger cars. Fits cars that have the filler neck coming through the rear fender. Fuel outlet is 3/8" for newer engines and it comes with a 5/16" fitting for stock applications. Stock capacity of 16 gallons. Dimensions: 29 1/4" x 21 1/4" x 8". Replaces GM# 3847320
Specific Applications:
Does not fit Business Coupe, Coupe Pickup or Sedan Delivery This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a mild steel fuel tank for 1949-1952 Chevrolet passenger cars. Stock capacity of 16 gallons. Dimensions: 29 1/4" x 21 1/4" x 8". Replaces GM# 3694851
Specific Applications:
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel fuel tank for 1953-1954 Chevrolet passenger cars. Stock capacity of 16 gallons. Dimensions: 29 1/4" x 21 1/4" x 8". Replaces GM# 3702862
Specific Applications:
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
Fits only 2nd Series models in 1955. 53" x 12 1/2" x 7".This part is considered oversize (OS) by United Parcel Service and is subject to an additional delivery fee.
This is an 18 Gallon mild steel gas tank for 1960-1966 Chevrolet & GMC trucks. Mounts inside cab as original. Does not fit Panel Truck or Suburban. Replaces GM# 3882631 This part is oversize. Special freight charges will apply. Call or email us for a freight quote.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a mild steel Gas Tank for 1955-1956 Chevrolet Station Wagon & Sedan Delivery (exc. 9-Pass Wagon). Capacity is 17 Gallons. Dimensions: 34-1/8" x 17-1/2" x 13-1/2". These tanks are made out of 16 gauge mild steel. Great replacements for that rusted out original. Replaces GM# 3721643 This item is Oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel Gas Tank for 1957 Chevrolet Station Wagon & Sedan Delivery (exc. 9-Pass Wagon). Capacity is 17 Gallons. Dimensions: 34-1/8" x 17-1/2" x 13-1/2". These tanks are made out of 16 gauge mild steel. Great replacements for that rusted out original. Replaces GM# 3737096 This item is Oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel fuel tank for modified 1941-1948 Chevrolet passenger cars. Fits cars that have the filler neck coming through the rear fender. Larger than stock capacity of 18 gallons. This baffled tank includes steel mounting straps and hardware. This tank is made with street rod builders in mind. Comes with an opening for an optional in-tank fuel pump, internal reservoir tray for fuel injection, and large pickup tube for V-8 applications. Works great on 6-cylinder applications too. This tanks has a fuel drain plug. Dimensions: 29 1/4" x 21 1/4" x 9-1/4". Replaces GM# 3847320
Specific Applications:
Does not fit Business Coupe, Coupe Pickup or Sedan Delivery This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This street rod fuel tank fits all 1949-1952 Chevrolet passenger cars (except Station Wagon & Sedan Delivery). Includes steel mounting straps and hardware. Replaces GM# 3694851
*Alloy Coated Steel to protect against corrosion
*Includes mounting straps, gaskets and O-ring sealed screws
*Size is: 29-1/4" x 21-1/4" x 9-1/4" (18 Gallons)
*Tank has a fuel drain plug
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This street rod tank is a mild steel fuel tank for 1953-1954 Chevrolet passenger cars. This tank is made with street rod builders in mind. Comes with an opening for an optional in-tank fuel pump, internal reservoir tray for fuel injection, and large pickup tube for V-8 applications. Larger capacity of 18 gallons. Dimensions: 29 1/2" x 21 1/4" x 9-1/4". Replaces GM# 3702862
Features:
*This tank has a fuel drain plug
*Optional In-Tank Fuel Pumps - Bolt-in! No Cutting or Welding!
*Includes mounting straps, gaskets & O-ring sealed screws
1953-1954 Chevrolet passenger cars (except Station Wagon or Sedan Delivery) This part is oversize and special freight charges will apply. Call or email us for a freight quote.
Fits Blazer, Panel Truck & Suburban.
Comes with mounting straps and fuel tank sender. This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
Fits: 1935 Chevrolet Master & 1936 All Chevy Passenger Models (except coupes with tank behind the seat) Mild Steel Tank. Check the dimensions against your original tank:16.25" X 37.5" X 7.5". 14 Gallons.Comes with short bolt-on neck piece. Requires hose connection to original filler neck piece. This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.
This is a replacement mild steel gas tank for 1938-1939 Chevrolet passenger cars (except Business Coupe, Coupe Pickup or Sedan Delivery. 14 gallon capacity. Replaces GM# 3650116, 597128
Features:
*Alloy Steel for maximum rust protection
*14 Gallon Capacity
*Oversize 3/8" NPT Internal Pickup Tube in the Stock Location
Specific Applications:
This part is oversize and special delivery charges will apply. Call or email us for a freight quote.
This is a Gas Tank for 1937 Chevrolet Passenger cars. It has stock dimensions of the original tank. Check the dimensions against your original tank:16.25" X 37.5" X 7.5" - 14 Gallon capacity. Fits All Passenger Models except Business Coupe and Sedan Delivery. Replaces GM# 593537
Features:
* Alloy Coated Steel for maximum rust protection
* Overall Size: 37-1/2" x 16-1/4" x 7-1/2"
* Accepts Stock and Aftermarket 5-hole sending units
* Oversize 3/8" NPT Internal Pickup Tube in the Stock Location This part is oversize and special freight charges will apply. Call or email us for a freight quote.
Great replacements for that rusted out original. This is for an under-bed tank conversion. Comes with mounting straps and fuel tank sender. This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.
Note: this tank is made for Street Rod applications.
Fits all passenger models (except Business Coupe, Coupe Pickup or Sedan Delivery)
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This mild steel, die stamped gas tank is made to fit all 1937-1940 Chevrolet Business Coupes, Coupe Pickup & Sedan Delivery. It has galvanized steel for maximum rust protection and it is painted silver. Overall size is 42" x 21-1/2" x 5-3/4". It accepts stock and aftermarket GM pattern sending units. The two piece neck design comes with rubber connecting hose. Oversized 3/8" NPT fuel feed and drain plug are in the stock locations. Tank capacity is 18 gallons. This tank is made for Chevy cars with the tank inside the car. Replaces GM# 3653589
This is a 1934-35 Chevrolet Standard Passenger Car Steel Gas Tank (Will not fit the Chevy Master)
Features:
* Internally Baffled - Minimizes Sloshing
* Vented
* Alloy Coated Steel Gas Tank
* 15 Gallon Capacity
* Accepts All 5-Hole Senders - VDO, SW, Classic, etc.
* Universal Fuel Neck Grommet
* Remote Rollover Vent Valve
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a replacement Gas Tank for 1928-1932 Chevrolet passenger cars. The tank requires the RV-63 (0-30 OHM) or RV-90 (0-90 OHM) sending unit. These tanks are designed for Street Rod Use.
Features:
* Internally Baffled - Minimizes Sloshing
* Top Vented
* Overall Size: 36-3/4" x 10-1/4" x 10-1/4"
* Mounting Straps Included
* Remote Rollover Vent Valve
WILL NOT WORK WITH FUEL INJECTED VEHICLES
Note: This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a mild steel gas tank made for 1947-1948 1/2 ton Chevrolet & GMC trucks. Also fits 1949-1953 1/2 ton models except pickup. This includes Suburban, Panel and Canopy Express. Tank mounts under the bed like original. Dimensions: 29 x 22 x 18. Rep[laces GM# 3692400
This part is oversize and subject to special freight charges. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This mild steel gas tank is a stock replacement for 1949-1954 Chevrolet Station Wagons and Sedan Deliveries. Replaces GM# 3705975.
This part is oversized and special freight charges will apply. Call or email for a freight quote.
This is a Frame Rail Mounted Steel Fuel Tank. The tank is zinc plated and painted on the exterior.
NOT FOR THE ORIGINAL LOCATION - NOT BED SIDE FILL. MOUNTS TO LEFT AND RIGHT FRAME RAIL BEHIND THE AXLE - STREET ROD
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a mild steel gas tank for 1939-1946 Chevrolet & GMC trucks with fuel tank inside the cab. Dimensions: 41" x 17" x 8" Deep. Filler neck is 15-1/4" Long. Original design, just like GM made them sixty years ago. Replaces GM# 603373, 605240
This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This gas tank is made like the original 1931-1932 Chevrolet passenger car fuel tank. Customer must provide an original filler neck that will be soldered onto the new tank. Allow 3-4 weeks for assembly. Replaces GM# 366910, 366918. Made in the USA!I
Dimensions:36-7/8" x 11/1/4" x 7-1/4"
These tanks are made from impact-resistant cross linked polyethylene (the same material used in race car tanks). Use with stock sending unit only.
See also RW-44S for straps for this tank. This part is considered oversize by United Parcel Service and is subject to an additional delivery fee.
14 gallon POLY UNIVERSAL UNDER BED Fuel Tank. Dimensions: 27" x 17" x 9.5".
Features:
*14 gallon capacity
*Universal Mounting Straps
*Bolt-On 3" Threaded Neck with Billet Cap or 2" Neck with a 6" Connecting Hose
This part is oversized and special freight charges will apply. Call or email us for a freight quote.
This polyethylene fuel tank fits 1949-1952 Chevrolet passenger cars.
*High-Density Polyethylene - Heavy Wall Construction
*Top Mounted Pickup Tube & Vent
*Bolt-On Neck
*16 Gallon Capacity - 1-7/8" Deeper than Stock
*Mounting Straps Included
*Overall Size: 28" x 20" x 8-1/2"
These tanks are made from impact-resistant cross linked polyethylene (the same material used in race car tanks). Our exclusive baffle-tunnel adds even greater strength to the heavy wall construction and minimizes sloshing to protect the sending unit. The pickup tube outlet is mounted on the top of the tank for added safety. In addition the roll-over vent valve protects against fuel spillage in accident situations and also protects against splash-out during normal driving. These tanks are designed for street rod use. They come with threaded "blind" metal inserts for the fuel tank sender. They are set up for VDO Stewart Warner and other after-market senders.
This part is oversized and special freight charges will apply. Call or email us for a freight quote.
This polyethylene tank is made for 1935 Master Series & All 1936 Chevrolet passenger cars. 16-1/2 gallon tank.
Features:
*Patented Baffle-Tunnel - Minimizes Sloshing
*Remote Mounted Rollover Vent
*Neck in Stock Location - Does Not Require Trimming the Inner Fender
*Overall Size: 36-1/2" x 16" x 9"
*Mounting Straps Included
This part is oversized and special freight charges will apply. Call or email us for a freight quote.