This copper gasket is used on all Chevrolet & GMC cars & trucks between rubber brake hose to wheel cylinder. Dimensions: 7/16" ID x 11/16" OD x .032" Thick. Replaces GM# 231343
Specific Applications:
1951 All Truck (except 1/2 Ton);1952-1966 All Passenger & Truck
These brake drum gaskets fit 1949-1964 Chevrolet passenger cars with 5-lug wheels. Dimensions: 3-716" ID x 5-13/16" OD Made in the USA! Replaces GM# 3687628
Specific Applications:1949-1964 Chevrolet Passenger Cars
For 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars
These brake drum gaskets fit 1929-1966 Chevrolet & GMC cars & trucks. Dimensions: 4-1/16 ID x 6-9/16 OD. Made in the USA! Replaces GM# 476518
Specific Applications:1929-1948 Passenger (exc. HB,JB); 1929-1959 1/2 Ton Truck; 1960-1966 1/2 Ton Truck (exc. 4WD)
This is a new brake drum that fits Chevrolet & GMC 1/2 ton trucks. Dimensions: Center hub / hole = 3 1/2"; Hub plain depth = 2 15/16 (inside, face up); ID = 11"; Depth of braking surface = 2 5/16"; 6 on 5-1/2" bolt pattern. Replaces GM# 3696266, 3846271
Specific Applications:
1960-1963 1/2 Ton - FRONT & REAR;
This part is heavy and special freight charges will apply. Call or email us for a freight quote.
This is a new brake drum that fits 1959-1970 Chevrolet passenger cars. Dimensions: Drum Depth 3.20"; Diameter - ID 11.06"; OD 12.52"; Overall Height 3.810"; Bolt Pattern: 5 on 4-3/4". Replaces GM# 3830166
Specific Applications:
1963-1964 Corvette (exc. metallic linings) - FRONT
This part is heavy and special freight charges will apply. Call or e-mail us for a freight quote.
For 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars
This is a new brake drum that fits Chevrolet passenger cars. Dimensions: Center hub / hole = 2 3/4"; Hub plain depth = 3 1/16 (inside, face up); ID = 11"; Depth of braking surface = 2 1/2"; Bolt Pattern: 5 on 4-3/4". Replaces GM# 3717781, 3752622 & 3828686
Specific Applications:
1959-1970 All Passenger cars - REAR
This part is oversize and special freight charges will apply. Call or e-mail us for a freight quote.
For 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars
This is a replacement brake drum for 1936-1950 Chevrolet & GMC cars & trucks. Dimensions: 11" Drum ID; Shoe Surface 2-1/4" Wide; Bolt Pattern 6 on 5-1/2; Overall Height 3-1/8". Overall Diameter 12-5/8"; OD of Flange into Backing Plate 11-5/8". Replaces GM# 601985
Specific Applications:
1936 - 1939 Passenger & 1/2 Ton (Exc. 1936 Standard FC), W/11" Brakes - REAR;
1940 - 1950 1/2 Ton - REAR
This part is heavy and special freight charges will apply. Call or email us for a freight quote.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This is a replacement FRONT Brake Drum for 1936-1950 Chevrolet & GMC car & trucks with 6-lug wheels.
1936-1940 Passenger Models with Straight Axle - Models: FD, GB, HB, JB, KB (Will not fit 1936 Standard FC) - FRONT;
1946-1950 1/2 Ton Commercial - FRONT
This part is heavy and special freight charges will apply. Call or email us for a freight quote.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This is a new REAR Brake Drum for 1947-1970 3/4 Ton Chevrolet & GMC Trucks with 8-Lug 12" Drums. Replaces GM# 609807, 3703638, 3754300
Specific Applications:
This part is heavy and special freight charges will apply. Call or email us for a freight quote.
1924 (Late - Series F) thru 1926 (Early - Series K) Chevrolet passenger cars and light trucks.
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
1926 (Late - Series V) thru 1928 Passenger cars & light trucks.
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This brake drum is for 1916-1924 (Early - Series B) Chevrolet passenger cars & light trucks
This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 Chevrolet Cars and Trucks
This FRONT rubber brake hose fits 1960-1968 Chevrolet & GMC trucks. Dimensions: 7/16-20 External; 7/16-24 Internal; 12" Overall Length. For front only. Replaces GM# 3910704
Specific Applications:
1961-1966 Series 10 (D-D) 1/2 Ton - FRONT;
1968 Series 30 w/Brake Booster, 11,000 lb. axle (exc. D-D) - FRONT
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This FRONT rubber brake hose fits all Chevrolet passenger cars. Dimensions: 12-11/16" Overall Length. For front only. Replaces GM# 3736529
Specific Applications:1958-1967 Passenger - FRONT
For 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 Chevrolet Cars
This rubber brake hose fits all Chevrolet & GMC cars & trucks for FRONT & REAR. Dimensions: 7/16-20 Exterior; 3/8-24 Interior; 17" Overall Length. Requires 3 hoses - 2 front and 1 rear on most applications. Replaces GM# 3696551
Specific Applications:
1951-1959 1/2 Ton Truck - FRONT & REAR (1955-1956 Trucks - See also SA-468);1955-57 Passenger - REAR Only (See RW-224 for Front hose)
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This FRONT rubber brake hose fits all 1955-1957 Chevrolet passenger cars. Dimensions: 7/16-20 External; 38-24 Internal; 12-11/16" Overall Length. For front only. Replaces GM# 3714860
Specific Applications:1955-1957 Passenger - FRONT
THIS BRAKE HOSE FITS FOLLOWING SERIES TRUCKS,
GMC 1958-59 1/2 TON 123" WHEEL BASE
19-3/4" LONG Frame side is double threaded, inside threads are 3/8-24 threads, outside threads are 5/8-18. Wheel cylinder side threads are 7/16-20. COMPARE DIMENSIONS BEFORE ORDERING.
FITS FOLLOWING SERIES TRUCKS,
1955-57 GMC 1/2 TON W/123" WHEEL BASE
LENGTH IS 17.69"Frame side is double threaded, inside threads are 7/16-24 threads, outside threads are 5/8-18. Wheel cylinder side threads are 7/16-20
This is a new set of brake shoes (4 pieces for two wheels) that fit 1946-1952 Chevrolet and GMC 3/4 ton - 1 ton trucks. Replaces GM# 3681116.
NOTE:
For 1 Ton trucks fits FRONT ONLY.
For 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This new brake shoe set fits 1951-1969 Chevrolet cars & 1/2 ton trucks. It has 4 shoes and is complete for two wheels. Replaces GM# 3696177
Specific Applications:
1960-1964 1/2 Ton Truck - REAR
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This new brake shoe set fits 1951-1959 Chevrolet cars & Chevy & GMC 1/2 ton trucks. It has 4 shoes and is complete for two wheels. Shoes are 11" x 2"
Specific Applications:1964-70 1/2 ton (exc. HD) - FRONT; 1964-75 1/2 ton - REAR
For 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 Chevrolet Trucks
This is a new set of brake shoes for 1959-1970 Chevrolet Passenger Cars - FRONT. Set is four shoes for two wheels. Replaces GM# 3756256, 3756589, 3770690, 3794190
For 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars
This new brake shoe set fits 1960-1970 Chevrolet & GMC 3/4 & 1 ton trucks. It has 4 shoes and is complete for two wheels. Shoes are 11-5/32" x 2-3/4"
Specific Applications:1960-1970 3/4 ton - FRONT OR REAR; 1960-1970 1 ton - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This is a new set of brake shoes (4 pieces for two wheels) that fit 1936-1952 Chevrolet cars & trucks. Replaces GM# 3681129. Shoes are 11" x 1-3/4"
Specific Applications:
1936-1950 1/2 ton trucks - FRONT & REAR:
1937-1942 3/4 ton trucks (with 14" Brakes) - FRONT;
1946-1952 3/4 ton trucks (exc. Dubl-Duti D-D) - FRONT
For 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This new brake shoe set fits 1951-1959 Chevrolet cars & Chevy & GMC 1/2 ton trucks. It has 4 shoes and is complete for two wheels. Replaces GM# 3695709
Specific Applications:1951-1958 Passenger - REAR; 1951-1959 1/2 Ton Truck - REAR
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This kit fits all 1940-1954 Chevrolet passenger cars and is used when converting an original master cylinder with two shaft holes to a single shaft version for use with an automatic transmission car. Kit includes Clutch Pedal Shaft Plug, Pedal Shaft Locking Pin & End Plug. Use with original master cylinder for standard transmission cars. Also use with our new master cylinders: FS-275 for 1940-1952 or FS-276 for 1953-1954 passenger cars only.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This is a dual master cylinder mounting adapter for 1955-1959 Chevrolet & GMC light trucks. This bracket is designed as a frame mount for manual transmission. It will work with the original emergency brake handle.
This is a DUAL MASTER CYLINDER conversion for 1937-1954 Chevrolet passenger cars, including Sedan Delivery. It requires your original master cylinder housing which is then fitted with a Corvette dual master cylinder. This conversion bolts into the original position under the floor and uses your original brake & clutch pedals in the original housing. If running an automatic transmission, order AF-425 clutch shaft delete kit to mount the brake pedal shaft without the clutch pedal installed.
Remove the original master cylinder and send in to us for exchange. The master cylinder must have a 4 bolt top cover. Be sure to send BARE CYLINDER & PLUNGER ONLY. Labor for disassembly $70.00 per hour. Some master cylinder cores are available at additional cost. Call or email us for availability. SPECIFY YEAR, MODEL, TRANSMISSION, & TYPE OF FRONT & REAR BRAKES WHEN ORDERING.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This Universal Firewall Brake Booster Kit comes with pedal brackets (pedal is not included), master cylinder and brake booster to mount on the firewall for a custom car or truck. The bracketing is fully adjustable with different pedal ratios and adjustable dash support bracket. This unit is for vehicles that will be using automatic transmissions and do not need a clutch pedal. Brake booster is 7" diameter.
This is a new brake master cylinder for 1971-1972 Chevrolet & GMC 1/2 Ton Trucks with Bendix Brake System. The bore size is 1-1/8" diameter. Check against your original. Replaces GM# 3995845, 6273936
Specific Applications:1971-1972 Chevrolet & GMC 1/2 Ton Trucks - Both 2WD & 4WD - Fits Both Manual & Vacuum.
This is a new brake master cylinder for 1967-1970 Chevrolet & GMC 1/2 Ton Trucks. The bore size is 1" diameter. Check against your original. Replaces GM# 3912103
Specific Applications:
CAN BE USED ON 1947-1959 PICKUPS BY USING ADAPTERS NW-4754 OR FS-652.
This is a new brake master cylinder for 1967-1970 Chevrolet & GMC trucks. The bore size is 1-1/8" diameter. Check against your original. Replaces GM# 3912128
Specific Applications:
1968-1970 Chevrolet & GMC 3/4 & 1 Ton Trucks (D-D), (exc. 11,000# Axle) - Series 20 & 30
This is a new brake master cylinder that fits all 1960-1966 Chevy & GMC trucks with hydraulic clutch. Casting # 3769216. Replaces GM# 3769215. 1-1/8" bore. Dual bore type for use with hydraulic clutch slave cylinder.
1960-1962 1/2, 3/4, & 1 Ton Trucks - Series 10-30;
1963-1966 Trucks with Flat Faced Cowl
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a completely new brake master cylinder for 1947-1950 Chevrolet & GMC trucks. 1" Diameter Bore. Replaces GM# 5450927
Specific applications:1947-1950 Chevy & GMC All 1/2 Ton Models
This is a completely new brake master cylinder for 1952-1955 (1st Series) Chevrolet & GMC trucks. 1-1/8" Diameter Bore. Replaces GM# 5454459
Specific applications:1952 1/2 ton models; 1953-1955 (1st series) All Commercial (exc. Double Duti or Hydramatic Transmission)
This is a completely new brake master cylinder for 1955-1959 (2nd Series) Chevrolet & GMC trucks. 1-1/8" Diameter Bore. Replaces GM# 5454503 with Casting # 5454330
Specific applications:1955-1959 (2nd Series) 1/2. 3/4 & 1 Ton Trucks - Series 3
This is a new brake master cylinder that fits all 1938-1946 Chevrolet & GMC Trucks (except 1/2 Ton Models). This is an all new master cylinder, not a rebuilt unit. Bore size: 1-1/4". Replaces GM# 605010 with Casting Number 5450259.
Specific Applications:1938-1946 Chevrolet & GMC Trucks (except 1/2 Ton) - Models HD,HE,T,ID,JE,V,KD,KE,KF,W,AL,AM,AN,Y,BL,BM,BN,M,DR,DS,O,P - 3/4 Ton, 1 Ton, 1-1/2 Ton & 2 Ton Models
For 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a new brake master cylinder for 1951-1955 (1st Series) Chevrolet & GMC trucks. The bore size is 1-1/8" diameter. Check against your original. Replaces GM# 5454384 with Casting Number 5453838
Specific Applications:1951 1/2 ton truck 1953-1955 (1st Series) Double-Duty 1954-1955 (1st Series) with Hydramatic Transmission
This is a completely new brake master cylinder for 1947-1955 (1st Series) Chevrolet & GMC trucks. 1-1/4" Diameter Bore. Replaces GM# 5454382
Specific applications:
1952-1955 (1st Series) KT, KU, Utility (exc. VJ);1952-1955 (1st Series)VJ, N (hvy. duty)
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a completely new brake master cylinder for 1940-1952 Chevrolet passenger cars. 1" Diameter Bore. Replaces GM# 5453737 with Casting # 5450655
Specific applications:
1950-1954 Chevrolet cars with Powerglide Transmission - Replacement (must use adapter kit AF-425)
NOTE: 1940-1948 MUST RETAIN LARGE FITTING/NUT ON END OF OLD MASTER CYLINDER TO INSTALL ONTO NEW MASTER CYLINDER.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
This is a new brake master cylinder that fits all 1936 Chevrolet Standard passenger models and 1936-1946 Chevy & GMC 1/2 Ton Trucks. This is an all new master cylinder, not a rebuilt unit. Bore size: 1". Replaces GM# 5450257, 5450628, 605009 with Casting Number 5450256.
Specific Applications:
1937 Master Pass (Straight Axle Models GC Series);1936-1946 Chevrolet & GMC 1/2 Ton Trucks - Models FB,GC,HC,JC,KC,AK,BK,CK,DP
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a completely new brake master cylinder for 1953-1954 Chevrolet passenger cars. 7/8" Diameter Bore. Replaces GM# 5454126 with Casting # 5454137
Specific applications:
1953-1954 Chevrolet cars with Powerglide Transmission - Replacement (must use adapter kit AF-425)
This is a completely new brake master cylinder for 1937-1939 Chevrolet passenger cars. 1" Diameter Bore. Replaces GM# 5450248
Specific applications:1937-1939 Chevrolet Master & Master Deluxe - Models GA, GB, HA, HB, JA, JB
This is a complete rebuilding service for single action master cylinders. This is a REBUILDING SERVICE ONLY, send in your original master cylinder and allow 2-3 weeks for this service to be completed. We will install a stainless sleeve in the bore of the master cylinder, then install a rebuild kit. NOT FOR DUAL MASTER CYLINDERS.
This Master Cylinder Repair Kit is used to repair master cylinders for 1959-1966 Chevrolet passenger cars as well as 1963-1966 Chevrolet and GMC trucks. Some exclusions may apply, see vehicle listings below for specific details.
1959 Chevrolet Passenger Cars1963-1966 Chevrolet and GMC 1/2 Ton - 1 Ton Trucks ( Excluding Power Steering and 4WD)
For 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks
This master cylinder rebuild kit fits all 1960-1966 Chevy & GMC trucks with hydraulic clutch. Replaces GM# 5465469. 1-1/8" bore. Repairs dual bore master cylinder that uses hydraulic clutch slave cylinder. Note! This kit services only one side: either brake or clutch of the dual bore.
Specific Applications:
1963 1/2 Ton Series 10 trucks (Dubl-Duti);1963-1966 Trucks with Flat Faced Cowl
This is a brake master cylinder repair kit for all 1936-1952 Chevrolet & GMC cars & 1/2 Ton trucks. All parts are included to completely rebuild original the master cylinder assembly. Bore diameter is 1" ID Replaces GM# 5453950, 604645
Specific Applications:
1951-1952 All Passenger cars
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This Brake Master Cylinder Repair Kit fits 1951-1959 Chevrolet & GMC trucks with 1-1/8" bore master cylinders. Includes all parts necessary to rebuild original application master cylinders. Replaces GM# 5454427, 5450962 & 5465201
Specific Applications:
1953-1959 Commercial models (1/2 ton thru 1 ton);1960-1966 Dubl-Duti
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This Brake Master Cylinder Repair Kit fits 1953-1954 Chevrolet passenger cars (except Accessory Power Brake) Bore size is 7/8". Kit includes all parts necessary to rebuild original master cylinder. Replaces GM# 5454218
Specific Applications:1953-1954 Chevrolet Passenger Models (except Power Brake)
This is a Heavy Duty Master Cylinder Rubber Dust Boot for all 1936-1967 Chevrolet & GMC cars & 1/2 Ton Trucks. Made in the USA by Steele Rubber, Inc. Replaces GM# 5450551, 5456779
This is a sleeving service only. A kit is required in addition. Allow 2-3 weeks. Step-bore -add $20.00 Be sure to send the bare cylinder only! Labor charge for disassembly $40.00 per hour.
This is a sleeving service only - a kit is required in addition. Allow 2 to 3 weeks. Step bore - add $20.00 each. Be sure to send the bare cylinder only! Labor charge for disassembly $50.00 per hour. This service will install a stainless steel sleeve at the standard bore for your master cylinder.
This is a new, complete REAR wheel cylinder assembly for 1955-1970 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter and it fits left or right side (See Specific Applications below). Replaces GM# 5459918
Specific Applications:
1955-1959 (2nd Series) 1/2 Ton Trucks (exc. Positraction) - LEFT;
1960-1970 1/2 Ton Trucks - LEFT
For 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This is a new, complete REAR wheel cylinder assembly for 1955-1970 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter for RIGHT side (See Specific Applications below). Replaces GM# 5459917
1955-1958 Passenger - RIGHT;
1960-1970 1/2 Ton Trucks - RIGHT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits 1955-1963 Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5456944, 5456945, Casting# 5454525, 5454526
Specific Applications:
1959 Passenger - FRONT;1960-1963 1/2 Ton Truck (exc. 4WD) - FRONT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1955-1963 Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5456944, 5456945, Casting# 5454525, 5454526
Specific Applications:
1959 Passenger - FRONT;1960-1963 1/2 Ton Truck (exc. 4WD) - FRONT
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC 1/2 Ton, Series 10 trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5464560, 5464561
Specific Applications:1964-1970 1/2 Ton Series 10 (exc. 4WD) - FRONT
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC 1/2 Ton, Series 10 trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5464560, 5464561
Specific Applications:1964-1970 1/2 Ton Series 10 (exc. 4WD) - FRONT
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. NOTE; CARS & 1/2 TON TRUCKS ARE REVERSED FROM EACH OTHER - ORDER BY LISTING BELOW. Bore Diameter 1-1/8. Replaces GM# 5455479, 5453818, Casting# 5450822.
Specific Applications:
1951-1959 1/2 Ton Truck (exc. 4/WD) - RIGHT FRONT;
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits Chevrolet passenger cars & Chevy & GMC trucks. Specify left or right when ordering. NOTE; CARS & 1/2 TON TRUCKS ARE REVERSED FROM EACH OTHER - ORDER BY LISTING BELOW. Bore Diameter 1-1/8. Replaces GM# 5455478, 5453817, Casting# 5450821.
Specific Applications:
1951-1959 1/2 Ton Truck (exc. 4/WD) - LEFT FRONT
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a new, complete REAR wheel cylinder assembly for 1951-1955 Chevrolet passenger cars and Chevy & GMC trucks. The bore size of this cylinder is 1" diameter and it fits left or right side. Two required per vehicle. Replaces GM# 5453819, Casting # 5453820
Specific Applications:
1951-1955 (1st Series) 1/2 Ton Trucks
For 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This FRONT Brake Wheel cylinder assembly fits 1960-1964 Chevrolet passenger cars. Specify left or right when ordering. Bore Diameter 1-3/16. Replaces GM# 5459516, 5459517, Casting# 5459465, 5459466
Specific Applications:1960-1964 Passenger - FRONT
This FRONT Brake Wheel cylinder assembly fits 1960-1964 Chevrolet passenger cars. Specify left or right when ordering. Bore Diameter 1-3/16. Replaces GM# 5459516, 5459517, Casting# 5459465, 5459466
Specific Applications:1960-1964 Passenger - FRONT
This REAR Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC trucks. Specify left or right when ordering. For coil spring applications. Bore Diameter 1-1/8. Replaces GM# 5457168, 5457169
Specific Applications:
1967 3/4 Ton Truck Series 20 (exc. D-D, 4WD) - REAR;
1968-1969 3/4 Ton Truck Series 20 (exc. Leaf Springs, D-D, 4WD, LP Gas, 396) - REAR;
1972 3/4 Ton Series 20 (4WD)
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This REAR Brake Wheel cylinder assembly fits 1964-1970 Chevrolet & GMC trucks. Specify left or right when ordering. For coil spring applications. Bore Diameter 1-1/8. Replaces GM# 5457168, 5457169
Specific Applications:
1967 3/4 Ton Truck Series 20 (exc. D-D, 4WD) - REAR;
1968-1969 3/4 Ton Truck Series 20 (exc. Leaf Springs, D-D, 4WD, LP Gas, 396) - REAR;
1972 3/4 Ton Series 20 (4WD)
For 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This is a new FRONT wheel cylinder for all 1958 Chevrolet passenger cars. The bore size is 1-1/8" ID. Specify Right or Left when ordering. Replaces GM# 5456249 & 5456250, Casting # 5456253
This is a new FRONT wheel cylinder for all 1958 Chevrolet passenger cars. The bore size is 1-1/8" ID. Specify Right or Left when ordering. Replaces GM# 5456249 & 5456250
This is a complete wheel cylinder for 1953-1959 Chevrolet & GMC 3/4 & 1 Ton trucks (Series 3600 & 3800) 1-1/8" diameter bore. Fits left or right. Replaces GM# 5455480, Casting# 5453927
Specific Applications:
1953-1959 3/4 Ton (Series 3600, except D-D & 14" Brakes) - REAR;
1960-1963 3/4 Ton Series 20 (4WD, D-D)
For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1960-1970 Chevrolet & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5459221, 5459222
Specific Applications:
1963-1970 3/4 & 1 Ton Truck - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT Brake Wheel cylinder assembly fits 1960-1970 Chevrolet & GMC trucks. Specify left or right when ordering. Bore Diameter 1-1/8. Replaces GM# 5459221, 5459222
Specific Applications:
1963-1970 3/4 & 1 Ton Truck - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
This FRONT wheel cylinder fits 1936-1950 Chevrolet & GMC trucks. Cylinder bore is 1-1/4" diameter. Replaces GM# 5300869, Casting# 1074903
Specific Applications:
1936-1942 1 Ton Trucks;
1936-1952 3/4 Ton Trucks;1947-1950 2 ton Trucks
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is a new, complete REAR wheel cylinder assembly for 1936-1950 Chevrolet & GMC cars & trucks (exc. 1936 Standard FC models). The bore size of this cylinder is 1-3/16" and it fits left or right side. It will work for 1936 Standard FC models as a replacement on the Front and Rear. The Standard wheel cylinder original bore size was 1-1/8". This replacement is 1-3/16" ID. Made in USA! Replaces GM# 5300866
Specific Applications:
1936-1948 Passenger cars (exc. 1936 Standard FC);
1936-1942 3/4 Ton Trucks
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
This is a new, complete FRONT wheel cylinder assembly for 1936-1948 Chevrolet passenger cars. NOTE: on 1937 & 1938 GB, HB straight axle models where brake hose comes in from the front, order reverse of normal (for left, order right; for right, order left). Replaces GM# 5300953 & 5300954. Specify Right or Left when ordering.
Bore diameter is 1-1/4". Does not fit 1936 Standard passenger (Model FC with straight axle) - See FS-104 for 1936 Standard model wheel cylinders.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a new, complete FRONT wheel cylinder assembly for 1936-1948 Chevrolet passenger cars. NOTE: on 1937 & 1938 GB, HB straight axle models where brake hose comes in from the front, order reverse of normal (for left, order right; for right, order left). Replaces GM# 5300953 & 5300954. Specify Right or Left when ordering.
Bore diameter is 1-1/4". Does not fit 1936 Standard passenger (Model FC with straight axle) - See FS-104 for 1936 Standard model wheel cylinders.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a new, complete FRONT & REAR wheel cylinder assembly for 1937-1952 Chevrolet & GMC 3/4 & 1 Ton trucks. The bore size of this cylinder is 1-3/8" diameter - fits left or right. Replaces GM# 5450071, Casting# 5450072
Specific Applications:
1946-1952 3/4 Ton - REAR;1946-1952 1 Ton & Dubl-Duty - FRONT
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is a new, complete REAR wheel cylinder assembly for 1946-1952 Chevrolet & GMC 1 Ton trucks. The bore size of this cylinder is 1-3/8" diameter - fits left or right. Replaces GM# 5451615, Casting# 5450072
Specific Applications:1946-1952 Chevy & GMC 1 Ton Trucks - REAR (exc. 14" Brakes)
For 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks
This is an all new REAR wheel cylinder assembly for 1936-1950 Chevrolet & GMC 1-1/2 & 2 Ton Utility Trucks. The bore size is 1-1/2". Replaces GM# 5300885. Original casting number 5300892.
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Trucks
This is a FRONT & REAR brake wheel cylinder repair kit for 1951-1970 Chevrolet & GMC cars & trucks. Kit comes with two cups, two end boots and one spring. Bore size is 1-1/8". Wheel cylinder pistons are not included in this kit. Replaces GM# 5450969, 5455661
1951-1959 Passenger - FRONT;
1953-1970: 3/4 Ton Truck - REAR (1-1/8" bore)
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This is a REAR brake wheel cylinder repair kit for 1951-1970 Chevrolet & GMC cars & trucks. Kit comes with two cups, two end boots and one spring. Bore size is 1". Wheel cylinder pistons are not included in this kit. Replaces GM# 5450970, 5455660
1951-1967 Passenger - REAR;
1953 Utility Truck - FRONT
For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars and Trucks
This REAR wheel cylinder repair kit fits 1949-1950 Chevrolet passenger cars. Bore inside diameter is 1-1/8". Kit consists of two cups and one spring. Replaces GM# 5450427
This FRONT Brake Wheel cylinder repair kit fits 1960-1970 Chevrolet passenger cars. Bore Diameter 1-3/16. Replaces GM# 5459708
Specific Applications:1960-1964 Passenger (exc. HD Brake/Susp.) - FRONT
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Cars
This is a FRONT brake wheel cylinder repair kit for 1949-1950 Chevrolet passenger cars. Kit comes with two adjusters, two cups and one spring. Bore size is 1-5/16". Wheel cylinder pistons are not included in this kit. Replaces GM# 5453709
Specific Applications:1949-1950 All Passenger Models
This is a FRONT brake wheel cylinder repair kit for 1936-1952 Chevrolet & GMC cars & trucks. Kit comes with two adjusters, two cups and one spring. Bore size is 1-1/4. Cylinder pistons are not included. Replaces GM# 5450431
Specific Applications:
1949-1950 All Truck (Exc. 1 Ton, D-D);1951-1952 3/4 Ton Truck (exc. D-D)
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks
This is a REAR brake wheel cylinder repair kit for 1936-1950 Chevrolet & GMC cars & trucks. Kit comes with two adjusters, two cups and one spring. Bore size is 1-3/16. Wheel cylinder pistons are not included in this kit. Replaces GM# 5450429
Specific Applications:
1936-1950 1/2 Ton Truck;1936-1945 3/4 Ton Truck - Models with 11" brakes - GD, HD, JD, KD, AL, BL
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 Chevrolet Cars and Trucks
