This is a reproduction transmission indicator needle used on 1953-1967 Chevrolet cars & trucks with Powerglide or Hydramatic transmissions. Replaces GM# 3701576
Specific Applications:
1954-1962 Chevy trucks with Hydramatic transmissions(HT);
1963-1967 Series 20 (D-D) trucks
For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a Rubber Bellows Gearshift Lever Seal for 1948-1959 Chevrolet & GMC cars & trucks with 3-Speed Column Shifts. 1-1/4" long. Replaces GM# 3686796.
Specific Applications:
1949-1954 Passenger with 3-Speed
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This universal hot rod shift boot is made of genuine high-grade leather (no plastic faux stuff here), these Shift Boots are tailored for sharp looks and long life. A large polished stainless floor bezel and ample boot material are ideal for large shift patterns and the top shift lever bezel lends a subtle pinch of maturity that sets this Boot apart from the rest. Includes hardware.
*Made of genuine high-grade leather. Use the real stuff.
*Stainless floor bezel: 4-1/2 inch inside diameter x 5-1/2 inch outside diameter.
BLACK LEATHER BOOT, WITH MOUNTING HARDWARE, INCLUDES A MACHINED HOLE BEZEL FOR SHIFTERS UP TO 5/8" DIAMETER. FITS LOKAR, GENNIE SHIFTER, AND MANY OTHERS
This is a pair of Gearshift Lever Control Shaft Bushings for 1939-1965 Chevrolet & GMC cars & trucks with 3-Speed or Automatic Transmission. The bushings are the larger type with dimensions: 3/8" ID x 9/16" OD barrel. Replaces GM# 3652244
Specific Applications:
1948-1959 Truck with 3-Speed Column Shift;
1955-1957 Passenger (exc. Power Glide);1960-1965 Series 20-30 (D-D) with 3-Speed
This is a REAR Seal & Bushing Set for 1955-1973 Chevrolet Powerglide Transmission Tail Shaft. Dimensions: Outside Diameter 2.377" (60.3758mm); Inside Diameter 1.500" (38.100mm) Width 0.4530" (11.5062mm). Replaces GM# 3746212, 3932255, 3786292
Specific Applications:
1955-1959 1/2 & 3/4 Ton Truck;
1970-1972 All (exc. Vega);1971-1973 Vega
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 Chevrolet Cars and Trucks
This gear shift boot retainer fits 1968-1783 Chevrolet and GMC trucks with 4-speed transmissions.
Specific Applications:
1973-1983 4-Speed W/O Overdrive
For 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 Chevrolet Trucks
This column gearshift collar fits Chevrolet cars & trucks with 3-speed transmissions.
1948-1953 Chevrolet pickups;1949-1952 Chevy passenger cars except Powerglide
This is a NORS Gear Shift Lever Cover for 1937-1947 Chevrolet & GMC cars & trucks with 3-speed floor shift. Will help with sloppy gearshift levers and worn out shift seat. Seat dimensions: 11/32" ID x 1-3/8" OD. This is a LIMITED SUPPLY ITEM, availability is subject to stock on hand. Replaces GM# 598141
Specific Applications:
1937-1947 Chevrolet & GMC trucks with 3-speed
NOTE: Installation requires removal of the shift tower, but the transmission can remain in the vehicle.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Cars and Trucks
This is a repair kit to fix problems with column shift and automatic shift levers for 1947-1959 Chevrolet & GMC cars & trucks with 3-speed or automatic transmissions. The kit comes with main spring, two locking pins, wear collar and a replacement rubber bushing. The rubber bushing is used in place of the original coiled spring at the end of the shift rod. The bushing prevents noise and keeps the shift lever steady. Refer to drawing for installation assistance.
Specific Applications:
1949-1954 Passenger Cars
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Repair Kit - Seat & Spring - for 1937-1947 Chevrolet & GMC cars & trucks with 3-speed floor shift. Kit consists of the seat and tensioning spring and comes with instructions. Will help with sloppy gearshift levers and worn out shift seat. Seat dimensions: 11/32" ID x 1-3/8" OD. Replaces GM# 590868, 590869
Specific Applications:
1937-1947 Chevrolet & GMC trucks with 3-speed
NOTE: Requires removal of the shift tower, but the transmission can remain in the vehicle.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 Chevrolet Cars and Trucks
THIS STAINLESS STEEL SHIFT LINKAGE KIT TAKES CARE OF SHIFT LINKAGE PROBLEMS ENCOUNTERED WHEN A STEERING COLUMN AND TRANSMISSION SWAP IS DONE. THE LINKAGE ARM IS FULLY ADJUSTABLE TO MATCH ANY SHIFTING MECHANISM AND INDICATOR PERFECTLY. THIS KIT IS ADJUSTABLE BETWEEN 17" TO 23" LONG AND INCLUDES ALL MOUNTING HARDWARE.
This is a replacement gear shift ball seat for all 1932-1936 Chevrolet cars & trucks with 3-speed transmissions. This ball seat is very often badly worn because it is a pot metal piece. The lock ring that holds this piece in place can work loose and allow movement in the ball seat. This will prematurely wear out the seat. When that happens, shifting becomes difficult or impossible. Check whenever rebuilding your transmission. This is an NORS item, limited stock available. Replaces GM# 367407
For 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
THIS STAINLESS STEEL SHIFT LINKAGE KIT TAKES CARE OF SHIFT LINKAGE PROBLEMS ENCOUNTERED WHEN A STEERING COLUMN AND TRANSMISSION SWAP IS DONE.THE LINKAGE ARM IS FULLY ADJUSTABLE TO MATCH ANY SHIFTING MECHANISM AND INDICATOR PERFECTLY. THIS KIT IS ADJUSTABLE BETWEEN 10" TO 17" LONG AND INCLUDES ALL MOUNTING HARDWARE.
This repair kit fixes the most common problem with the gearshift box on the steering column of 1948-1954 Chevrolet & GMC cars & trucks. Prevents linkage from locking between two gears because of worn gearshift box. This is a New Old Replacement Stock (NORS) item - Limited Supply - availability is subject to stock on hand.
Specific Applications:
1949-1954 Chevy Passenger cars with Standard Transmission
For 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Gear Shift Knob for 3-Speed and Automatic transmissions on 1967-1987 Chevrolet & GMC Trucks. Black replacement knob.
Specific Applications:
1973-1991 Trucks
This plastic gearshift lever knob is correct for all 1940-1948 Chevrolet passenger cars. The knob is ivory in color. Must be heated in hot water to be installed. It has a 3/8" ID hole for installation. Replaces GM# 3665490.
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a NON-TRHEADED gearshift knob for 1929-1939 Chevrolet passenger cars & 1929-1954 Chevy & GMC trucks - Floor Shift Models Only. Replaces GM# 374993
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a TRHEADED gearshift knob for 1929-1939 Chevrolet passenger cars & 1929-1954 Chevy & GMC trucks - Floor Shift Models Only. This is a black knob that has a 3/8"-24 fine thread. Replaces GM# 374993
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This plastic gearshift lever knob fits all 1950-1952 Chevrolet passenger cars, with Powerglide transmissions. The knob color is ivory. Replaces GM# 3694310, 3699926