54 Items Found
Grommets
This is a License Light Grommet for 1939 Chevrolet passenger cars License light & hand brake cable through firewall grommet for various uses. GM 4089552 Sheet Metal Hole: 9/16" Center Hole: 5/16" Outside Diameter: 13/16" Slot Width: 1/16"
For 1939 Chevrolet Cars
BUCKET WIRE GROMMETS
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks
This is a headlight wire grommet through fender for 1939-1942 Chevrolet passenger cars. Two grommets required per vehicle. Replaces GM# 379457 Specific Applications: 1939-1942 All Passenger - Models JA, JB, KA, KB, KH, AG, AH, BG, BH
For 1939 Chevrolet Cars
1939 Grommet, license light wire through trunk lid liner. 5/16 I.D. for 5/8 sheet metal hole. As required. Car.
For 1939 Chevrolet Cars
This is a rubber headlight conduit grommet for 1933-1936 Chevrolet passenger cars & trucks. Two grommets required per vehicle - sold each. Dimensions: 1-5/8" OD x 1/2" ID x 5/16" Thick. Replaces GM #370730. Specific Applications: 1933-1934: All Passenger - Models CA, CC, DA, DC; 1934-1936 All Trucks - Models DB, EB, FB, P, Q, R; 1935: Standard Passenger only - Models EC
For 1933 1934 1935 1936 Chevrolet Cars and Trucks
1932 Grommet, headlight bar support through radiator shell. Two (2) per car and 1933 trucks
For 1933 Chevrolet Cars and Trucks
1937-38 Grommet,headlight & tail light loom through body sheet metal. Four (4) to six(6) per car. Most models, as required.
For 1937 1938 Chevrolet Cars
1942-48 Grommet or nipple, parking light wire from light body. Part of assembly. Replaces #5933167. For all passenger automobiles.
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1933-34 Grommet, headlight and horn wire conduit through radiator shell. Replaces #370731. Two holes for two separate conduits. 1933: All Eagle (CA) 1934: Sedan Delivery (CB) 1934-35 PICKUP
For 1934 1935 Chevrolet Cars and Trucks
Head and Park Light Wire Grommet
HEAD & PARK LIGHT FENDER GROMMETS
For 1956 1957 Chevrolet Trucks
Mounting Pads
This is a pair of headlight mounting pads for all 1938 Chevrolet & GMC trucks. Replaces GM# 597992
For 1938 Chevrolet Trucks
This is a pair of headlight mounting pads for all 1939-1940 Chevrolet & GMC trucks. Replaces GM# 350910
For 1939 1940 Chevrolet Trucks
This is a pair of Headlight Mounting Pads for 1936-1940 Chevrolet & GMC cars & trucks. Replaces GM# 476489 Specific Applications: 1936 Passenger; 1937 Chevrolet Truck; 1937-1940 GMC Truck
For 1937 1938 1939 1940 Chevrolet Trucks
This is a pair of Headlight Mounting Pads for 1941-1946 Chevrolet & GMC trucks.
For 1941 1942 1944 1945 1946 Chevrolet Trucks
Note: This is not an original item, but can be used to protect your paint job.
For 1932 Chevrolet Cars
1961 Passenger tail light mounting seals (4 pieces)
For 1961 Chevrolet Cars
Note: This is not an original item, but can be used to protect your paint job.
For 1929 1930 1931 1932 Chevrolet Trucks
Note: This is not an original item, but can be used to protect your paint job.
For 1931 Chevrolet Cars
1937-38 Pad, tail light bracket mounting. Replaces #594954. 2-5/16 x 3-3/8, inside bead. Coupe, Sport Coupe and Convertible.
For 1937 1938 Chevrolet Cars
These are headlight bucket mounting pads for 1940 Chevrolet passenger cars. Sold in pairs for one car, these are rubber pads to replace the originals.
For 1940 Chevrolet Cars
1934 Pad, headlamp support to radiator shell. Replaces #374342. 1935 All Standard pad, headlamp support to radiator shell. 1-1/4 OD x 3/8 ID
For 1934 1935 Chevrolet Cars
1935-36 Pad, tail light bracket to fender. Replaces #378661. 4 long. For series EA, ED, FA, FD and FC sedans, coaches and coupes. Compare with 60-172 and 60-545.
For 1935 1936 Chevrolet Cars
1958 Pass tail light mtg. seals (exc. Impala, wagon & SDL)
For 1958 Chevrolet Cars
1958 Pass. tail light mounting seals (wagon & SDL only)
For 1958 Chevrolet Cars
2-3/16" X 3-3/4" inside of bead. Can be used on right or left hand. Sedan and Sport Sedans only (humpback trunk). Order TWO each for cars with lamps on each fender.
For 1937 1938 Chevrolet Cars
This mounting pad is for fender mounted tail light arms for 1933-1935 Chevrolet passenger cars. Replaces GM# 474018 Specific Applications: 1933-1934 Passenger cars with fender mounted tail lights 1935 Standard Passenger cars with fender mounted tail lights.
For 1933 1934 1935 Chevrolet Cars
2-1/2" X 3-5/8" overall. 1 or 2 per car. Series GA GB HA JA JB. For flat-back coach sedan with rear mounted spare only. Replaces #594970.
For 1937 1938 1939 Chevrolet Cars
1935 Pad, bracket mounting to body for tail and license plate lamp. Replaces #378864 for Master Deluxe Town Sedan and Sport Coupe.
For 1935 Chevrolet Cars
1958 Pass. tail light mounting seals (Impala only) 6 pcs.
For 1958 Chevrolet Cars
Replaces #370889. Series CA DA (except Town Sedan and Sport Sedan).
For 1933 1934 Chevrolet Cars
This is a Rubber Teardrop Shaped Headlight Bracket Mounting Pad for 1934-1935 Chevrolet Standard passenger cars. Dimensions: 1-7/8" x 2-7/8" overall.
For 1934 1935 Chevrolet Cars
1947-59 Pad, tail lamp retainer. Replaces #3686479. 4-1/2 O.D. Suburban with end gate.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
1936 Pad, tail light bracket mounting. Replaces #477161. 5-1/2 long. Town Sedan, Sport Sedan, Coupe with pickup box only. Compare with 60-116.
For 1936 Chevrolet Cars
1941-48 Mounting pads, back up lights, elliptic, sharp beaded edge. 1-5/16 x 2-7/8. Some, as required.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
1933 car Bracket at fender. 1934-36 ½ ton models. headlight bracket at fender. See also our # 60-178. 2-1/8 x 3-7/16
For Chevrolet Cars and Trucks
This is a pair of Headlight Mounting Pads for 1936-1940 Chevrolet & GMC cars & trucks. Dimensions: 2-1/2" x 6-1/16". Made in the USA! Replaces GM# 476489 Specific Applications: 1936 Passenger; 1937 Chevrolet Truck; 1937-1940 GMC Truck
For 1936 Chevrolet Cars and Trucks
This is a tail light mounting pad for 1947-1956 Chevrolet & GMC panel trucks & Suburbans for the light on the left door. Dimensions: 4" x 5-1/2". A beautiful reproduction made by Steele Rubber in the USA! Replaces GM# 3676259
For 1947 1948 1949 1950 Chevrolet Trucks
1933 car headlight Bracket mounting pad all models. Replaces #370752. 2 x 3-5/8 overall 1934-35 Comm - pads, headlight bracket mounting. Replaces #370752. 1936 All except 1/2 ton - pads, headlight bracket mounting. Replaces #370752.
For 1936 Chevrolet Cars and Trucks
This fits only the 1935 Master (EA, ED) models mounting pad headlight bracket to fender only.
For 1935 Chevrolet Cars
1937-39 SDL only. Spacer, rubber, tail and license lamp bracket to body. Left hand only was used originally.
For 1937 1938 1939 Chevrolet Cars
This is a pair of headlight mounting pads for all 1937 Chevrolet passenger cars. Made in the USA by Steele Rubber, Inc. Replaces GM# 595397.
For 1937 Chevrolet Cars
Except Fleetline 4 door sedan.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
These fit the 1937-39 car parking light mounting pads for the GR-60. Perfect copy and fit.
For 1937 1938 1939 Chevrolet Cars
All passenger models (except Sedan Delivery and Station Wagon).
For 1951 1952 Chevrolet Cars
1950-52 Mounting pad, back up lamp. Fully molded left and right. Replaces #5939847-8. Fits all passenger models with optional back up lamps
For 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is the tail light rubber mounting pad for all 1949-1950 Chevrolet passenger cars (except Sedan Delivery or Station Wagon). Dimensions: 3 x 6-1/2. Proper lip design. Excellent copy. Made in the USA by Steele Rubber, Inc. Replaces GM# 3688069
For 1949 1950 Chevrolet Cars
1937-39 SDL only. Spacer, rubber, tail and license lamp bracket to body. Right hand side.
For 1937 1938 1939 Chevrolet Cars
Not listed in Master Parts Books but we have seen this part on several original cars. Molded with bead on both sides for use on right or left side. Sedan Delivery only.
For 1949 1950 1951 1952 Chevrolet Cars
1941-48 Pads, tail light body mounting. Replaces #3662259-60. Right and left. Fleetline 4-door Sedans only
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Seals
1958 Seal, headlamp outer rim to sealed beam retainer ring. Possible fit for models with dual headlamps
For 1958 Chevrolet Cars
1940-53 All incl. SDL & Corvette - Seals, headlight door to lens ring - no wire. Double lip for sealed beam headlights Double lip type for sealed beam headlights. For single lip type compare to C-389 or BA-261. 1940-53: All including Sedan Delivery & Corvette. 1954: Corvette only. 1955: All passenger models and Corvette.
For 1955 1956 1957 Chevrolet Cars and Trucks
54 Items Found