This bumper center bolt medallion is for single bar bumpers on 1931-1936 Chevrolet cars & trucks. Some bumpers require one medallion and some require two. Used on both front & rear bumpers. Compare to your original to be sure.
We were not happy with the quality of other medallions that were available on the market. The fit and finish were not up to our standards so we made our own. You will be pleased and impressed with how our medallion fits closely to the bumper face bar. Our bolts are polished to a show quality shine. Because they are stainless steel, they will never rust. Another fine quality product made by The Filling Station. Replaces GM# 363383
Specific Applications:
1935 Standard Passenger & Truck;1936 All Truck
For 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This is a universal flat head bumper bolt and nut. Has stainless steel cap on bolt head. Bolt measures 1/2" x 1-1/2". See also FS-12722 for OEM style nut.
For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
This is a slotted hex nut used commonly on Chevrolet & GMC bumper bolts. It is a 1/2"-20 thread with a zinc finish. This style of nut is correct for most GM car & truck applications.
This is a 1936-1946 oval bumper for Chevrolet & GMC cars & trucks. Highly Polished Solid Stainless Steel, each bolt comes with nut & lock washer. See also FS-12722 for OEM style nut. Dimensions: 7/16-20 x 1-1/4", Bolt Head: 1-1/2" Long x 3/4" Wide, Oval Head. Replaces GM# 594205, 476456
Specific Applications:
1937 Master Passenger (exc Cabriolet);1936-1946 Truck
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is the 1929-36 bumper bracket to frame bolt kit. Cadmium plated. Kit includes 4 bolts and 4 lock washers. Sold only in a set. Bolts and Nuts are 9/16"-12
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
This is the Bumper End Bolt for 1931-1936 Chevrolet cars & trucks that have SINGLE Bar Bumpers. We made our bolt in solid Stainless Steel and had the head of the bolt highly polished to a show winning shine. Each bolt comes with the spacer, lock washer and nut - all stainless! Dimensions: Head 1-5/16" diameter, Overall Length 3-3/8", Bolt diameter 7/16". Two required per bumper. Replaces GM# 363380
Specific Applications:
1935 All Standard Passenger & Truck;
We were not happy with the quality of other bumper end bolts that were available on the market. The fit and finish were not up to our standards so we made our own. You will be pleased and impressed with how the bolt head fits over the end of the bumper opening. It completely covers the opening as the originals did. It also has the locating cross formed into the bottom of the bolt head, just like the originals, to insure that the head stays centered in the opening. Our bolts are polished to a show quality shine. Because they are stainless steel, they will never rust. Another fine quality product made by The Filling Station.
These are the 1929 and early 1930 passenger car bumper end bolt set for double bar bumpers. Chrome plated over steel. Set includes 4 bolts that are 5-1/2" long and 2 bolts that are 4-5/8" long. Sold only in a set of 6.
This LEFT REAR bumper end bracket mounts to the bumper end and provides additional support to the center bumper piece on 1957 Chevrolet passenger vehicles. EDP coated steel.
This RIGHT REAR bumper end bracket mounts to the bumper end and provides additional support to the center bumper piece on 1957 Chevrolet passenger vehicles. EDP coated steel.
These INNER REAR bumper brackets fit 1957 Chevrolet passenger vehicles. These brackets are made of EDP coated steel and replace GM# 3746747 and GM# 3746748.
These extensions are required whenever installing a rear bumper on a 1934-1936 pickup. Used on both Chevy & GMC pickups. Four piece set for both sides. Made in USA!
This is a set of FRONT Bumper Brackets for 1947-1955 (1st Series) 1/2 & 3/4 Ton (exc D-D) Chevrolet & GMC Trucks. Replaces GM# 3683663, 3683664, 3683665, 3683666
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a set of REAR Bumper Brackets for 1963-1966 Chevrolet Stepside Pickups with coil spring rear suspension. The set is four pieces for Left & Right sides. Braces are cupped steel, as original for these trucks. Replaces GM# 3819979, 3819980, 3823089, 3823090
This set of rear bumper brackets is for 1973-1980 Chevrolet & GMC Fleetside pickups, Blazer, Jimmy & Suburbans. FITS FLEETSIDE PICKUP, JIMMY, BLAZER, AND, SUBURBAN.
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This is a set of REAR Bumper Brackets for 1958-1959 Chevrolet & GMC FLEETSIDE pickups. The four piece set is for the Left & Right sides. Replaces GM# 3751711, 3751712, 3751713, 3751714
This is a six piece REAR bumper bracket set for 1941-1946 Chevrolet & GMC 1/2 Ton pickups. Manufactured from hardened steel, laser cut. Exact as original. Fits 1/2 Ton pickups only. Replaces GM# 599382, 599384, 3658094
Installation Notes: The two brackets that have 90 degree bends mount on the top and bottom of the "C" channel. The shorter bracket is on top, longer on bottom. The curved brackets mount to the bumper face bar and bolt to the brackets on the frame. Leave all bolts loose until everything is aligned. Then tighten bolts evenly until tight.
This is a four piece FRONT bumper bracket set for 1941-1946 Chevrolet & GMC 1/2 & 3/4 Ton pickups. Manufactured from hardened steel, laser cut. Exact as original and Made in the USA! Replaces GM# 3658053, 3658054, 3658013, 3658014
This is a set of REAR Bumper Brackets for 1947-1955 (1st Series) 3/4 Ton & 1 Ton Chevrolet & GMC Trucks. Replaces GM# 3684833, 3684834, 3684835, 3684836
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a set of FRONT Bumper Brackets for 1937 Chevrolet pickups. Made in the USA! Replaces GM# 594711
Specific Applications:1937 Truck - Models GC, GD, GE - 1/2, 3/4 & 1 Ton
This is a 6-PIECE set of REAR Bumper Brackets for 1938-1939 Chevrolet pickups. Replaces GM# 597872
Specific Applications:1938-1939 Truck - Models HC, HD, HE, JC, JD, JE - 1/2, 3/4 & 1 Ton
These bumper brackets are designed for use with 1934-1936 REPRODUCTION bumpers RV-7, RV-7SS, RV-13, RV-13SS only. These brackets WILL NOT WORK WITH OEM BUMPERS.
Specific Applications:1934-1936 Chevrolet Pickup - FRONT reproduction bumper with or without hump in center
This is a 6-PIECE set of REAR Bumper Brackets for 1937 Chevrolet pickups. Made in the USA! Replaces GM# 594154
Specific Applications:1937 Truck - Models GC, GD, GE - 1/2, 3/4 & 1 Ton
This is a 6-PIECE set of REAR Bumper Brackets for 1940 Chevrolet pickups. Made in the USA! Replaces GM# 3653682
Specific Applications:1940 Truck - Models KC, KD, KE, KF - 1/2, 3/4 & 1 Ton
This is a single bar type used in late 1931 through 1932 Chevrolet passenger cars & 1934-1936 Chevy pickups. NOTE: When used on 1934-1936 pickups, extension brackets RV-91 will be required.
For 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
These FRONT bumper brackets replace left and right on all 1938-1939 Chevrolet passenger cars (except Sedan Delivery). Replaces GM# 597863, 597864, 597865, 597866, 350509, 350510, 350511, 350512
Fits: 1933-34 Master; 1933-35 Standard
These bumper brackets are specially made for the RV-77 street rod bumper for the 1933-1935 models and must be used together. These will not fit an original application!
This bumper brace is for Single Bar Front Bumpers used in late 1931 through 1933. Made to fit all Chevrolet passenger cars and pickups. Bumper bolt hole centers are 58-5/8".