This Door Check Strap fits all 1949-1952 Chevrolet passenger cars on the front door. A common problem with these cars is that the strap will break and the door will open too far and dent the door trim or front fender. Check yours to prevent damage. This is a quality spring steel part Made in the USA! Replaces GM# 4600309.
This is a Door Check Anchor Bracket IN THE DOOR on 1939-1946 Chevrolet & GMC Trucks. This bracket must be welded into the door. Dimensions: 3" x 1-3/8" x 1/8". See also SA-132 for check link bracket & bumper on the door post side. Made in the USA!
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a Door Check Link Bracket on the DOOR POST SIDE on 1939-1946 Chevrolet & GMC Trucks. This unit has a spring steel bracket, rubber bumper and pin. See also RW-204 for anchor bracket inside door. Replaces GM# 3681747
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
These are Door Check Links for 1937-1939 Chevrolet passenger cars. They stop the door from opening too far. These may fit other years. Replaces GM# 4097396
These are the large door bumpers located at the top and bottom of the door opening for all 1960-1991 Chevrolet & GMC trucks, including Suburban, Blazer & Jimmy. Sold in pairs, most vehicles require two pairs per truck. Replaces GM# 3900684
This is a door bumper with steel core for 1930-1946 Chevrolet & GMC cars & trucks. Dimensions: 1 diameter x 1/4 thick - held by screw. This bumper is also used on 1932 Chevrolet passenger cars & 1933 Trucks on the front splash apron mounting.
This plate fits over the dovetail bumpers on the door post of all 1931-1936 Chevrolet & GMC trucks (except 1936 Low Roof Cab). These are exact as original. Replaces GM# 373429 - 2 required per vehicle.
For 1931 1932 1933 1934 1935 1936 Chevrolet Trucks
This set of inserts is for the door dovetail housing on the door post. They are correct for 1937-1939 Chevrolet passenger cars. Use with GR-71 Casing & Cover. This kit can also be used with GR-114 & GR-115 1931-1936 Casing Cover & Dovetail. Note: to be used on early applications, springs must be shortened slightly. Call for more information. One set required per door. Comes with 2 plastic inserts, 2-rubber pads and 4-springs. Dimensions of inserts- 1-3/32 wide at base & 23/32 tall X 17/32 thick. Replaces GM#'S 4075334, 4075336 Specific Applications: 1937-1939 Passenger (original applications); 1931-1936 Passenger (used as a replacement with slight modification)
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars
This chrome cover plate is for the door dovetail housing on the door post. They are correct for 1937-1939 Chevrolet passenger cars. Use with GR-209 Inserts & Springs. One cover per door - fits front or rear doors. Dimensions: 2-3/16 x 3-1/2" wide. Replaces GM# 4091155
For 1933-1936 Chevrolet cars and possibly other models, including trucks. These bumper stops fit inside the metal casing cover which receives the door dovetail. Dimensions: 1.148" Wide x .790" High x .600" Thick. Top Recess is .932" wide. See also GR-209, 70-1821, 60-60, & 3681079
These are the internal parts of the dovetail casing for all 1940-1948 Chevrolet passenger cars. This set does two doors, Replaces GM#'s 4099836, 4099832
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a door dovetail casing and cover set for 1931 Chevrolet passenger cars. It can be used as a replacement on 1932-1936 Chevy cars by combining this assembly with GR-114 Dove Tail Wedge. This 2-piece set is chrome plated. For inner plastic bumpers & springs that go into this housing order GR-209 separately. Replaces GM# 4003104, 4023570, 4063039 Note: When using GR-209 with this assembly, it may require shortening the springs slightly. Call for more information about this installation.
This bolt & star washer fits all 1947-1955 Chevy & GMC trucks for the door hinges. Note: in 1955, used on 1st Series ONLY. Dimensions 3/8"-24 x 7/8". Replaces GM# 3685462, 4092154
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
These lock rod clips fit the door lock rods in 1955-1957 Chevrolet passenger vehicles. They will also fit the 1955-1957 Wagon tail gate rod. Stainless Steel.
This is a Stainless Oval Head, Slotted Wood Door Hinge Screw for 1926-1936 Chevrolet passenger cars. The dimensions are 1/4"-20 x 3 inches. This screw is intended to go through the hinge and all the way through the wood door post. There is one of these through bolts on two or more of the door hinges on early Chevrolet passenger cars. Check the thickness of your door post before ordering.
For 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
This set contains Phillips pan head screws with a star washer below the head. If you require a clutch head screw, please order part #GM-1251, which is sold individually. SET OF 8 SCREWS & 8 STAR WASHERS. SCREWS ARE 1/4'-20 X 3/4" PAN HEAD.
For 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
These door latch to handle rod clips fit 1955-57 Chevrolet passenger cars. This small pair of clips goes on the end of the door rods. These clips also work on the 57 fresh air ducts that open and close the duct work where the heater control cables attach onto the ducts.
Specially formed spring which goes over worn latch flipper to bring it back to correct height. Keeps door tight. No truck should be without a "pair and a spare". Also protects new latches.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks
This is a CHROME Screw to retain the Windshield Crank Handle on 1940-1946 Chevrolet & GMC Trucks . It is a fillister head screw 1-3/8" long to mount the crank handle onto the windshield crank mechanism in the dash.
For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a set of door latch mounting screws for 1960-1972 Chevrolet & GMC trucks. Set includes 6 screws 5/16-18 x 3/4 countersunk, phillips screws and 6 countersunk lock washers.
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Screw Set is for the Door Hinge Access Plates on 1947-1955 (1st Series) Chevrolet & GMC trucks. This 10 piece set is enough for both access plates.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
These polished stainless steel door striker screws fit all 1937-1948 Chevrolet passenger cars. Set of four pieces for two doors. Dimensions: 1/4-28 x 3/4" Long. Replaces GM# 4074901, 4099249, 4132281
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
These door lock rods fit 1955-1957 Chevrolet 2-door hardtops. These rods are bent as the originals and have the correct rolled threads on the top for the lock knobs. Clips included.
These lock rods fit both 2-door and 4-door Chevrolet sedans as well as nomads. These rods are bent as the originals and have the correct rolled threads on the top for the lock knobs. Clips included.
These door lock rods fit 1955-1957 Chevrolet 4-door hardtops. These rods are bent as the originals and have the correct rolled threads on the top for the lock knobs. Clips included.
This is a Door Latch Lock Bolt Slider Return Spring for 1941-1948 Chevrolet passenger cars. This spring pushes the locking bolt back out of the latch to insure the door stays closed. This is a NORS (New Old Replacement Stock) item - Limited Supply. Replaces GM# 4147585 This spring is also used on Pontiac, Buick, Oldsmobile, Cadillac & La Salle. compare to your original spring before ordering.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This plate fits all 1932-1946 Chevrolet & GMC trucks on the door to align the door. These are exact as original. Holds door correctly in place. Fits on the door. Raised center is 1 inch wide. Replaces GM# 474884. See also 3681079 the rubber and metal pieces for the receiver on cab post for this dovetail. Can be used on wood framed doors (1932-1936) by countersinking holes for wood screws.
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This Shim Pack is used when installing the door latch into 1964-1972 Chevrolet/GMC pickups and Chevrolet Blazers. Sold as a set of 12 shims, enough to do both sides.
For 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This door wedge guide plate is used on 1931-1932 Chevrolet Roadster and Touring Models to align the door and hold in the correct position. Fits on the door.
This is a Door Latch Return Spring for 1929-1931 Chevrolet passenger cars. This spring pushes the locking bolt back out of the latch to insure the door stays closed. This is a NORS (New Old Replacement Stock) item - Limited Supply. This part will likely work on Buick, Pontiac, & Oldsmobile. Compare to your original spring before ordering.
This is a Polished Stainless Steel Door Hinge Bolt for 1936-1940 Chevrolet passenger cars. It is a hex head bolt. Dimensions: 5/16 x 24 thread X 5/8" Long.
This is a Door Latch Return Spring for 1932-1933 Chevrolet passenger cars. This spring pushes the locking bolt back out of the latch to insure the door stays closed. This is a NORS (New Old Replacement Stock) item - Limited Supply. This part will likely work on Buick, Pontiac, Oldsmobile, Cadillac, & La Salle. Compare to your original spring before ordering.
This is a 1937-1948 Chevrolet closed car door dove tail wedge plate. It is chrome plated. One required per door. Dimensions: 2-3/8" X 1". Replaces GM# 4125999, 2038264, 4073913 Specific Applications: 1937-1940 Passenger cars (exc. Convertible or Station Wagon) - FRONT & REAR; 1937-1948 Sedan Delivery - BACK DOOR; 1941-1948 Passenger cars (exc. Convertible or Station Wagon) - FRONT; 1948 Station Wagon - FRONT & REAR
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
These latch to handle rods fit 1955-1957 Chevrolet Sedans, Nomads and Wagons. This is the rod that goes between the door lock and the latch. This part comes with the cloth covering and the clips that attach it to the door.
These latch to handle rods fit 1955-1957 Chevrolet 2-door hardtops. This is the rod that goes between the door lock and the latch. This part comes with the cloth covering and the clips that attach it to the door.
This chrome door dove tail work with original dove tail door post assemblies on 1929-1931 Chevrolet passenger cars. It will also work on Chevy passenger cars 1932-1936 by changing the door post assembly to our part GR-115. These pieces are the same dimensionally and will interchange as a combined unit. Replaces GM# 4220191
This is a pair of Door Hold Open Spring Clips & Rivets for 1953-1960 Chevrolet passenger cars. Detent plates are used to hold the doors partially open. Installs on upper and lower part of each hinge with two rivets. Two plates and four rivets per hinge. These come as a pair of spring steel clips and four rivets, enough to do one hinge. Replaces GM# 4156601
For 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
These door check straps fits Chevrolet trucks from 1934-1936 and prevent the doors from opening too far. They're made from leather and come with brass rivets for extra strength. Metal curved ends are included. 6.25 inches overall length.
This FRONT LEFT glass guide fits 1947-1950 Chevrolet and GMC trucks. This set includes the glass guide as well as mounting brackets. Dimensions: 29/32" Wide x 20-29/32" Long. Replaces GM# 3685369, 3685370 Specify Right or Left when ordering.
This FRONT RIGHT glass guide fits 1947-1950 Chevrolet and GMC trucks. This set includes the glass guide as well as mounting brackets. Dimensions: 29/32" Wide x 20-29/32" Long. Replaces GM# 3685369, 3685370 Specify Right or Left when ordering.
This REAR Metal Window Channel Glass Guide fits 1947-1950 Chevrolet and GMC trucks. This guide runs vertically in front of the door latch and keeps the glass from breaking inside the door. Dimensions: 15/16" x 20-29/32". Specify Left or Right when ordering. Replaces GM# 3809865, 3809866
This REAR Metal Window Channel Glass Guide fits 1947-1950 Chevrolet and GMC trucks. This guide runs vertically in front of the door latch and keeps the glass from breaking inside the door. Dimensions: 15/16" x 20-29/32". Specify Left or Right when ordering. Replaces GM# 3809865, 3809866
This is a door latch repair kit for two latches on all 1937-1940 Chevrolet passenger cars. Kits include two springs, detent and cam, and rivets for two latches. Works on left or right side. Part of assemblies GM# 4082040, 4082041
This is a set of pushbutton door lock cylinders with keys for 1949-1954 Chevrolet passenger cars, including Sedan Delivery. Set comes with two locking pushbuttons, two keys, four retainers, two springs, two snap rings and round gaskets for two front doors. Replaces GM# 3697875, 3693969 Specific Applications: 1949-1954 Chevrolet Passenger Cars, including Sedan Delivery - Front Doors; 1949-1954 Sedan Delivery - Rear Door
This is the door check link support that bolts to the door post. The door check strap (P/N FS-176) hooks onto this piece to prevent the door from opening too far and damaging the front fender. Make sure yours are in good condition! Replaces GM # 4561013.
