Dimensions: 18 1/4 wide x 19 1/8 high x 2 1/2 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Dimensions: 17 1/8 wide x 20 1/16 high x 2 1/2 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Fits 1927 Capitol Passenger & 1/2 Ton Models 1927-1928 1 Ton Trucks Dimensions: 17 1/8 wide x 21 3/8 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Dimensions: 16 1/4 wide x 23 1/4 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Fits 1931 Passenger Cars & 1931-1932 Trucks. Dimensions: 17 5/16 wide x 24 1/4 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
1932 Passenger Models & 1933 Trucks. Dimensions: 17 5/16 wide x 23 3/4 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Dimensions: 18 1/8 wide x 23 13/16 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. Dimensions: 16 1/4 wide x 23 1/4 high x 2 1/8 TH These beautiful reproductions will make that great restoration perfect. Check the specifications with dimensions from your core. Retain your original tanks and brackets to install on the new core. These cores can be made for any vehicle - allow 3-5 weeks when not in stock. Note: 2 1/8 thick cores are made in 2 thickness. Because we use a smaller diameter hex (1/4") - more cooling than the original core is attained even though the new core is not as thick. NOTE: This is NOT a complete radiator. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1927 Chevrolet Passenger cars and 1927-1928 Chevy Trucks. Made in the USA! Dimensions: 17-1/8" wide x 21-3/8" high x 2-1/8" thick. Note: 2-1/8" thick cores are made in 2" thickness. Because the V-cell is so much more efficient it will cool better than the original honeycomb even though it is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1929-1930 Chevrolet Passenger & All Chevy Trucks. Made in the USA! Dimensions: 18 1/8" wide x 23 13/16" high x 2 1/8" thick. Note: 2-1/8" thick cores are made in 2" thickness. Because the V-cell is so much more efficient it will cool better than the original honeycomb even though it is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1922-1924 Superior Chevrolet Passenger cars & light delivery trucks. Made in the USA! Dimensions: 18-1/4" wide x 19-1/8" high x 2 1/2" thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1925-1926 Superior K Chevrolet Passenger cars & light delivery trucks. Made in the USA! Dimensions: 17-1/8" wide x 20-1/16" high x 2 1/2" thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1928 Chevrolet Passenger cars. Made in the USA! Dimensions: 16 1/4" wide x 23 1/4" high x 2 1/8" thick. Note: 2-1/8" thick cores are made in 2" thickness. Because the V-cell is so much more efficient it will cool better than the original honeycomb even though it is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
Fits 1931 Passenger Cars & 1931-1932 Trucks. Made in the USA! Dimensions: 17 5/16 wide x 24 1/4 high x 2 1/8 TH Note: 2-1/8" thick cores are made in 2" thickness. Because the V-cell is so much more efficient it will cool better than the original honeycomb even though it is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This V-Cell radiator core is made as a direct replacement for the original honeycomb core for 1932 Chevrolet Passenger Models & 1933 Chevy Trucks. Made in the USA! Dimensions: 17 5/16 wide x 23 3/4 high x 2 1/8 thick. Note: 2-1/8" thick cores are made in 2" thickness. Because the V-cell is so much more efficient it will cool better than the original honeycomb even though it is not as thick. NOTE: This is NOT a complete radiator. You must retain your original tanks and brackets to install on this core. These cores are BUILT TO ORDER and NOT RETURNABLE. Check your dimensions before ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
These tanks are highly polished stainless steel and include mounting brackets, hardware and instructions. Measurements are from the bottom of the tank to the top of the cap. 2" diameter x 13" Long
These tanks are highly polished stainless steel and include mounting brackets, hardware and instructions. Measurements are from the bottom of the tank to the top of the cap. 2" diameter x 15" Long
These tanks are highly polished stainless steel and include mounting brackets, hardware and instructions. Measurements are from the bottom of the tank to the top of the cap. 2" diameter x 17" Long.
These tanks are highly polished stainless steel and include mounting brackets, hardware and instructions. Measurements are from the bottom of the tank to the top of the cap.
This beautiful recreation of a rare GM Factory Accessory Radiator Overflow Tank fits 1938-1955 Chevrolet cars & trucks. Kit comes with two different decals for early or later versions of this accessory. Also included is hose and mounting screws. Comes with a copy of the factory installation instructions. Replaces GM# 985319, 985528 Specific Applications: 1938-1948 Passenger Car; 1938-1955 (1st Series) Truck
For 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a Complete Copper-Brass Radiator for 1955-1956 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. NOTE: Brackets in 6 cylinder/grille side mount position. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 23", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles without factory AC. This is a 3-row Radiator for 6 cylinder and 283 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:15-1/2" x 23-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10272. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITHOUT FACTORY AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:15-1/2" X 23-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10452. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet and GMC 1/2 ton - 1 ton trucks without factory AC. This is a 3-row Radiator for 230 CID engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-3/8" x 18-1/2", Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 15-1/2" X 23" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1959-1960 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cylinder/283 CID engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder/283 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/2" x 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1959-1960 Chevrolet passenger vehicles. This is a 3-row Radiator for 348 CID engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 348 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/2" x 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles with factory AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10267A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITH FACTORY AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10448. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1942-1948 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and manual transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-1/4X19-3/4 , Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1938 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22-5/8" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1940-1941 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1937 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" x 16-3/4", Inlet size: 1-1/4", Outlet size 1-1/2". This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1939 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles. This is a 3-row Radiator for 409 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2", Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITHOUT FACTORY AC. This is a 3-row Radiator for 409 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2 X 2", Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10500. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1949-1954 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/4" x 23", Inlet: 1-1/4 Outlet: 1-1/2" Replaces GM #3130944 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1956 Chevrolet Passenger Cars. This is a 3-row Radiator for V8 engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for V8 engines with grille side mounting and are complete with tanks. NOTE: Brackets in 6 cylinder/grille side mount position. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 21-3/8", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1947-1955 1st series Chevrolet 1/2-3/4 ton trucks. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 20 1/4" x 19 3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles without factory AC. This is a 3-row Radiator for 6 cylinder and 283 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:15-1/2" x 23-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10272A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet and GMC 1/2 ton - 1 ton trucks without factory AC. This is a 3-row Radiator for 230 CID engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-3/8" x 18-1/2", Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 15-1/2" X 23" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITHOUT FACTORY AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:15-1/2" X 23-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10452. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1957 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. NOTE: Brackets mount on grille side/ 6 cylinder position. Features original curved inlet. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 23", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1937 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" x 16-3/4", Inlet size: 1-1/4", Outlet size 1-1/2". This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1938 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22-5/8" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1939 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1940-1941 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 22" X 16-3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1942-1948 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-1/4X19-3/4 , Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1956 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. NOTE: Brackets in 6 cylinder/grille side mount position. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 23", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1959-1960 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cylinder/283 CID engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder/283 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/2" x 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles with factory AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10267. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet passenger vehicles. This is a 3-row Radiator for 409 CID V8 engines with AUTOMATIC transmissions (Includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2", Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITH FACTORY AC. This is a 3-row Radiator for 283 and 327 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2" , Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10448. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITHOUT FACTORY AC. This is a 3-row Radiator for 409 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2" X 2", Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10500A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-3/4" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 283 CID engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 283 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 18" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 348 CID engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 348 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-3/4" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1967-1972 Chevrolet and GMC 1/2 ton - 1 ton trucks. This is a 3-row Radiator for 250 CID engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4COMPARE CORE SIZE TO FS-80901/FS-80900. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4 COMPARE CORE SIZE TO FS-56890 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" Inlet: 1-1/4 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-82071. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" Inlet: 1-1/4 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-13172. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1947-1955 1st series Chevrolet 1/2-3/4 ton trucks. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 20 1/4" x 19 3/4", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1949-1954 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/4" x 23", Inlet: 1-1/4 Outlet: 1-1/2" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1956 Chevrolet Passenger Cars. This is a 3-row Radiator for V8 engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for V8 engines with grille side mounting and are complete with tanks. NOTE: Brackets in 6 cylinder/grille side mount position. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 21-3/8", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1967-1972 Chevrolet and GMC 1/2 ton - 1 ton trucks EXCLUDING 250 CID. This is a 3-row Radiator for vehicles with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2"" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4 COMPARE TO FS-80930/FS-80901 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-81650 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" , Inlet: 1-1/2 Outlet: 1-1/2. With heater hose connection. COMPARE CORE SIZE TO FS-82060/FS-81660 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" Inlet: 1-1/4" Outlet: 1-1/2" COMPARE CORE SIZE TO FS-82000. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1956 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. NOTE: Brackets in 6 cylinder/grille side mount position. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 23", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1957 Chevrolet Passenger Cars. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. NOTE: Brackets mount on grille side/ 6 cylinder position. Features original curved inlet. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 23", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1957 Chevrolet Passenger Cars. This is a 3-row Radiator for V8 engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for V8 engines with engine side mounting and are complete with tanks. NOTE: Brackets mount in the V8/ engine side of the core support. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 21-3/8", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 6 cyl engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-3/4" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 283 CID engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 283 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 18" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1958 Chevrolet passenger vehicles. This is a 3-row Radiator for 348 CID engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for 348 CID engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-3/4" x 19-1/4" , Inlet: 1-1/2 Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1967-1972 Chevrolet and GMC 1/2 ton - 1 ton trucks. This is a 3-row Radiator for 250 CID engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-80901A/FS-80900A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4 COMPARE CORE SIZE TO FS-56890A This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 26-1/4" X 2" Inlet: 1-1/4 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-82071A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" Inlet: 1-1/4 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-13172A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1949-1954 Chevrolet Passenger Cars, including Sedan Delivery and Station Wagon. This is a 4-row Radiator for V8 Engine and Manual Transmission (no transmission cooler). Radiators are new direct replacement for small block V8 engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper style core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/4" x 23". Inlet Size 1-1/2", Outlet Size 1-3/4"; Thickness 2-5/8". Replaces GM# 3130944 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITH FACTORY AC. This is a 4-row Radiator for 409 CID V8 engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2 X 2-5/8", Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10465. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1967-1972 Chevrolet and GMC 1/2 ton - 1 ton trucks EXCLUDING 250 CID. This is a 3-row Radiator for vehicles with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2"" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-3/4 COMPARE TO FS-80930/FS-80901 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for 6 cylinder engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" W/ 2-3/4" wide mounts, Inlet: 1-1/2 Outlet: 1-1/2 COMPARE CORE SIZE TO FS-81650 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1973-1977 Chevrolet and GMC trucks. This is a 3-row Radiator for V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" , Inlet: 1-1/2 Outlet: 1-1/2. With heater hose connection. COMPARE CORE SIZE TO FS-82060A/FS-81660A This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1978-1980 Chevrolet and GMC trucks. This is a 3-row Radiator for V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17" X 28-3/8" X 2" Inlet: 1-1/4" Outlet: 1-1/2" COMPARE CORE SIZE TO FS-82000A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1957 Chevrolet Passenger Cars. This is a 3-row Radiator for V8 engines and AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement for V8 engines with engine side mounting and are complete with tanks. NOTE: Brackets mount in the V8/ engine side of the core support. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 16-5/8 x 21-3/8", Inlet: 1-1/2 Outlet: 1-3/4" Replaces GM #3130944. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1959 GMC 1/2 ton trucks. In 1955 fits 2nd series only. This is a 3-row Radiator for original engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-7/8 x 21-3/8", Inlet: 1-1/2" Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1955-1959 GMC 1/2 ton trucks. In 1955 fits 2nd series only. This is a 3-row Radiator for original engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-1/4 x 23-1/2", Inlet: 1-1/2" Outlet: 1-3/4" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1949-1954 Chevrolet Passenger Cars, including Sedan Delivery and Station Wagon. This is a 4-row Radiator for V8 Engine and Automatic Transmission (includes transmission cooler in lower tank). Radiators are new direct replacement for small block V8 engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper style core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 17-1/4" x 23". Inlet Size 1-1/2", Outlet Size 1-3/4"; Thickness 2-5/8". Replaces GM# 3130944 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
In 1955, used on 2nd Series Only. Core is 23-1/2" Wide. 3-row - compare with FS-80170. Radiators are new replacement standard "OEM" (original equipment manufacturer) type - and are complete with tanks. Also available is a "HIGH EFFICIENCY" type core. This core has more tubes that are set closer together for maximum cooling. Finally - for the ultimate in cooling - we offer the "DESERT COOLER" which has an extra row of cooling tubes. Note: not all vehicles can be equipped with the "desert cooler" because of clearance restrictions. Please call to see if this option is available for your vehicle. Call for pricing on radiators other than the OEM type. Specify engine - transmission - and if equipped with air conditioning. This part is oversized and special freight charges will apply.
This is a Complete Copper-Brass Radiator for 1960-1962 Chevrolet 1/2 ton - 1 ton trucks. This is a 3-row Radiator for MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for Chevrolet trucks and complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-7/8" X 21-3/8", Inlet: 1-1/2" Outlet: 1-3/4" COMPARE CORE SIZE WITH FS-80300A This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1960-1962 GMC 1/2 ton - 1 ton trucks. This is a 3-row Radiator for MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for GMC trucks and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 19-7/8" X 21-3/8", Inlet: 1-3/4" Outlet: 2" COMPARE CORE SIZE WITH FS-98133A This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1964 Chevrolet passenger vehicles WITH FACTORY AC. This is a 4-row Radiator for 409 CID V8 engines with AUTOMATIC transmissions (includes transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-1/2" X 25-1/2 X 2-5/8", Inlet: 1-1/2 Outlet: 1-3/4" COMPARE CORE SIZE TO FS-10465A. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1961-1963 Chevrolet and GMC 1/2 ton and 3/4 ton trucks without factory AC. This is a 3-row Radiator for 292 CID engines with MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions:17-3/8" X 24-3/4", Inlet: 1-1/2 Outlet: 1-3/4", COMPARE TO FS-80460 This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1947-1955 GMC 1/2-3/4 ton trucks. In 1955 fits 1st series only. This is a 3-row Radiator for original engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! Core dimensions: 20-3/4"X19-3/4", Inlet: 1-1/2" Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Complete Copper-Brass Radiator for 1941-1946 Chevrolet 1/2-3/4 ton trucks. This is a 3-row Radiator for 6 cyl engines and MANUAL transmissions (no transmission cooler). These radiators are a new direct replacement for 6 cylinder engines and are complete with tanks. Specify engine and if equipped with air conditioning. Copper core with 1/2" tubes on 9/16" centers. Made in the USA! NOT AVAILABLE FOR AUTO TRANSMISSION VEHICLES. Core dimensions: 22-1/8" x 17-1/2", Inlet: 1-1/4 Outlet: 1-1/2" This item is oversize and special freight charges will apply. Call or email us for a freight quote.