Replaces GM# 3690790, 751005 1934-35: All Master Series 1936-54: All passenger Use with RW-201 Spring Bolt. 2 required per car. See also CV-311K for kit with these items for both rear springs.
This is a Spring Bushing that fits 1934-1955 (1st Series) Chevrolet & GMC cars & trucks. Bushing Dimensions: OD .879" x ID .694" x 1-3/4" Long, Smooth Center with spiral grease groove. Replaces GM# 600163 Specific Applications: 1934-1940 Chevy & GMC Trucks - All Commercial & Utility (exc COE) - FRONT & REAR; 1935-1936 Master Passenger with Straight Axle - Models ED, FD - FRONT; 1941-1955 (1st Series) Chevy & GMC 1/2 & 3/4 Ton Trucks - FRONT; 1941-1955 (1st Series) Chevy & GMC 1/2 Ton Trucks - REAR
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a REAR Spring Bushing for 1937-1955 (1st Series) Chevrolet & GMC Trucks. Dimensions: OD 1.125" x ID .875" x 1.950" Long. 4 required per vehicle. Replaces GM# 596854 Specific Applications: 1937-1955 (1st Series) 3/4 & 1 Ton Trucks
Replace those worn rubber leaf spring bushings with polyurethane bushings. Polyurethane bushings are virtually indestructible and have practically no deflection when cornering. POLYPLUS bushings are the ultimate combination of polyurethane for performance and durability along with the superior lubricating qualities of graphite for smooth operation
Replace those worn rubber leaf spring bushings with polyurethane bushings. Polyurethane bushings are virtually indestructible and have practically no deflection when cornering. POLYPLUS bushings are the ultimate combination of polyurethane for performance and durability along with the superior lubricating qualities of graphite for smooth operation
1930-32 passenger & 1/2 ton & 1933-35 standard passenger. One lock plate required per shackle. Refer to shop manual for procedure to adjust the shackle. Do not over-tighten! When adjusted properly, install the lock plate to hold the adjustment.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Correct design for 1955-56, but can be used on 1955-59 models. In 1955, used on 2nd Series only. This unit includes: side plates - bushings - pins - center bolt - nuts and seals - for one shackle.
In 1955, fits 1st Series ONLY. This unit includes: side plates - bushings - pins - center bolt (if required) - nuts and seals - for one shackle. Side Plate dimensions: Length of Side Plate is 4" OL, Pin Centers 2-15/16" GM# 3847459
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This spring shackle is used on 1947-1963 Chevrolet & GMC trucks on front & rear springs. This unit includes: side plates - bushings - pins - nuts and seals - for one shackle. See Also FS-257A for early design shackle. 1947-1955 compare to FS-203. Replaces GM# 3682788, 3741083 Specific Applications: 1947-1955 (1st Series) 1 Ton Truck (exc. D-D) - FRONT; 1955-1959 1/2 Ton - FRONT & REAR; 1955-1959 3/4 & 1 Ton - FRONT; 1955-1959 3/4 Ton REAR; 1960-1963 D-D Truck (exc. 102 WB) - FRONT; 1963-1964 4WD - FRONT
This is a complete REAR spring shackle assembly for Chevrolet cars & Chevy & GMC 1/2 ton trucks. This unit includes: side plates - bushings - pins - center bolt - nuts and seals - for one shackle. Side Plate dimensions: 5" OL Height, Pin Centers 3-13/16". Replaces GM# 350441 ,495035 Specific Applications: 1934-1939: Passenger and 1/2 ton (except 1934-35 Standard); 1940-1955 (1st series) 1/2 ton
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a Rear Spring Shackle with Rubber Bushings for 1940-1954 Chevrolet passenger cars. This unit includes: side plates - rubber bushings - pins and nuts for one shackle. Two shackles required per vehicle. Replaces GM# 609462
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
These are extended length side plates only for the front or rear spring shackles for 1955-1959 Chevrolet & GMC pickups. These lower the rear of the truck 2" and are a direct replacement for the factory units. Kit comes with four side plates and two center bolts. You must re-use original tapered pins and shackle bushings as these are not a complete shackle assembly.
This Leaf Spring Shackle Unit fit 1947-1955 (1st Series) Chevrolet & GMC 1, 1-1/2 & 2 Ton Trucks. Set includes: side plates - bushings - pins - center bolt - nut and seals - for one shackle. In 1947-1955 compare to FS-257.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a complete FRONT shackle assembly for 1934-1946 Chevrolet & GMC cars & trucks. Each assembly includes: 2 side plates, 2 threaded bushings, 2 tapered, threaded pins, 4 seals for one spring. Replaces GM# 603712 Specific Applications: 1934-1940: All Passenger & Truck with Straight Axle (exc 1934-1935 Standard or COE); 1941-1946: All Truck (exc. Utility, COE)
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
REAR SPRING SHACKLE FOR CHEVROLET & GMC TRUCKS - REPLACES GM#'s 3705599, 3725531, 3713066, 3896376, Casting # 3705600, 3726902. Dimensions: This shackle has a top width of 2-1/2", bottom width of 3-7/8", with a bushing ID of 7/8", ID of lower pin opening of 7/8". Specific Applications: 1933-1955: (1st series) 3/4 and 1 ton - utility 1955-63: 2nd series - utility 1955-68: 2nd series - 1 ton except double duty 1960-65: 1/2 and 3/4 ton 4-wheel drive 1968: 3/4 ton
This shackle rebuild kit will repair two shackles for 1934-1954 Chevrolet & GMC cars & trucks. Kit requires reuse of side plates and center bolts from original shackles. It includes 4ea. P-199 tapered pins, 4ea. TB-6 threaded bushings and 8ea. RW-181 neoprene seals. Specific Applications: 1934-1948 Passenger Cars; 1934-1954 Chevrolet & GMC 1/2 Ton Trucks
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
This is a Rear Spring Shackle Kit with Rubber Bushings for 1940-1954 Chevrolet passenger cars. This unit includes: side plates - rubber bushings - pins and nuts for two shackles. Also includes two inlox front bushings at the front of the rear springs. Kit does both rear springs. Replaces GM# 609462, 3690790, 751005
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
We were able to find a quantity of NORS (New Old Replacement Stock) REAR shackles for 1930-1935 Chevy cars & 1/2 ton trucks. These are a limited supply item and we cannot reorder when they are gone. Each kit includes: 2 Side Plates, 2 Shackle Pins (tapered), Spring Tension Washer, Center Bolt, Lock Plate & Nut. Specific Applications: 1930-33 All passenger & 1/2 Ton models 1934-35 All Standard Passenger Models. Replaces GM#s 602999 & 363010
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
We were able to find a quantity of NORS (New Old Replacement Stock) FRONT shackles for 1930-1935 Chevrolet cars & trucks. These are a limited supply item and we cannot reorder when they are gone. Each kit includes: 2 Side Plates, 2 Shackle Pins (tapered), Spring Tension Washer, Center Bolt, Lock Plate & Nut. LIMITED SUPPLY ITEM - availability subject to stock on hand. Specific Applications: 1930-33 All Chevrolet Passenger & Trucks 1934-35 All Standard Passenger Models. Replaces GM#s 602998 & 363009
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
This is a FRONT Shackle Kit for 1947-1955 (1st Series) Chevrolet & GMC 1/2 & 3/4 ton trucks. Set includes: 2 each FS-197 front shackle units - 2 each FS-138 bolt and bushing sets and 6 each FS-98 angle grease fittings.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
This is a REAR Shackle Kit for 1955-1959 Chevrolet & GMC 1/2 Ton Trucks. Set includes: 2 each FS-257 shackle units - 2 each FS-320 bolt and bushing sets and 6 each FS-98 angle grease fittings.
This is a Front & Rear Spring U-BoltCompare to your original and SA-112 (4-3/4") Fits 1929-39 Passenger - FRONT; 1929-55 (1st Series) 1/2 Ton - FRONT (In 1955, used on 1st Series only) 1938-54 Passenger - REAR; 1947-54 1/2 Ton - REAR;
This is a Leaf Spring U-Bolt for 1929-1955 Chevrolet & GMC cars & trucks. Dimensions: 1/2" Diameter x 1-7/8" Inside Width x 4-3/4" High - Square Top. Compare to your original and SA-112D (3-3/4" High) Specific Applications: 1929-1939 Passenger - FRONT; 1929-1955 (1st Series) 1/2 Ton - FRONT; 1938-1954 Passenger - REAR; 1947-1954 1/2 Ton - REAR
This is a FRONT Spring U-Bolt for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 Ton trucks. Dimensions: 1/2 dia. x 2-1/16 wide x 4-3/4 square top. Four required per truck.
This is a REAR Spring U-Bolt for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 Ton trucks. Dimensions: 1/2 dia. x 2-1/16 wide x 7-3/4 square top. Four required per truck.
In 1955, used on 1st Series only. Fits: 1933-40 Utility truck (exc. COE); 1946-55 (1st Series) 3/4 Ton Truck (exc. D-D). Replaces GM# 3691620. Compare to original.
This is a REAR Spring U-Bolt for 1946-1959 3/4 Ton Chevrolet & GMC Trucks. Dimensions: 5/8" Diameter x 2-1/16" Wide x 8-1/2" High - Compare to your original. Each bolt comes with high nuts and flat washers. Made in the USA! Replaces GM# 3681686, 3714891
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
