FAX: (541) 258-6968
 
22 Items Found
Firewall Panels
Chevrolet Parts -  1947-55 FIREWALL TO FENDER FILLER PLATES 1/2 - 1TON
SA-346
USD $12.95 SET
CHEVROLET 1947-55 FIREWALL TO FENDER FILLER PLATES 1/2 - 1TON
In 1955, fits 1st series only.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1947-55 FIREWALL TO FENDER FILLER PLATES 1 1/2 - 2TON
SA-347
USD $13.50 PR
CHEVROLET 1947-55 FIREWALL TO FENDER FILLER PLATES 1 1/2 - 2TON
In 1955, fits 1st series only.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1949-54 PASSENGER SPEEDO GROMMET
TN-20
USD $14.95 EA
CHEVROLET 1949-54 PASSENGER SPEEDO GROMMET
Driver's side. Two hole. All passenger models.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1947-55 PU&PANEL FIREWALL KIT 1ST
751000
USD $412.00 KIT
CHEVROLET 1947-55 PU&PANEL FIREWALL KIT 1ST
This 1947-1955 (1st Series) Chevrolet pickup and panel truck Firewall Kit is made for STREET RODS ONLY. Check the measurement of the setback on your firewall as illustrated. These firewalls have a 3" setback to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with complete instructions needed for installation. This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1949-54 PASS FIREWALL KIT-4" STRAIGHT SETBACK
GR-427
USD $451.00 KIT
CHEVROLET 1949-54 PASS FIREWALL KIT-4" STRAIGHT SETBACK
SPECIFY WHETHER OR NOT USING A MASTER CYLINDER ON THE FIREWALL. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1949-54 PASS FIREWALL KIT-4" TAPERED SETBACK
GR-428
USD $468.00 KIT
CHEVROLET 1949-54 PASS FIREWALL KIT-4" TAPERED SETBACK
TO BE USED WITH STOCK BRAKE BOOSTER. SPECIFY WHETHER OR NOT USING A MASTER CYLINDER ON THE FIREWALL. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1947-55 1ST PU FIREWALL KIT-4" SETBACK
GR-444
USD $468.00 KIT
CHEVROLET 1947-55 1ST PU FIREWALL KIT-4" SETBACK
In 1955, used on 1st Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1947-55 1ST PU FIREWALL KIT-4" SETBACK -CURVED
GR-444C
USD $485.00 EA
CHEVROLET 1947-55 1ST PU FIREWALL KIT-4" SETBACK -CURVED
This firewall is custom curved and fits 1947-1955 Chevrolet and GMC trucks. In 1955, used on 1st Series only. Check the measurement of the setback on your firewall as illustrated. These firewalls are made to allow clearance for small block or big block Chevy V-8 engines. Firewalls are made in 16 gauge steel. Each kit comes with hardware, body sealer and complete instructions needed to install your firewall. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks

Gaskets
Chevrolet Parts -  1949-54 AIR INLET FIREWALL GASKETS
TN-15
Wait List
CHEVROLET 1949-54 AIR INLET FIREWALL GASKETS
This gasket mounts beween the firewall and the fresh air inlet valve. 1 pair required per car.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1949-54 FIREWALL ACCESS PLATE SEAL
TN-42
Wait List
CHEVROLET 1949-54 FIREWALL ACCESS PLATE SEAL
All passenger models. This is the "kidney shaped" inspection plate that is found on the left side of the firewall.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Grommets
Chevrolet Parts -  1947-1955 HEATER HOSE FIREWALL GROMMET
TN-77
USD $2.95 EA
CHEVROLET 1947-1955 HEATER HOSE FIREWALL GROMMET
This is a Heater Hose Firewall Grommet for 1947-1955 Chevrolet & GMC cars & Trucks. Grommet dimensions: OD 1-1/2" x ID 7/8" for Hole Size 1-1/8". Two required per vehicle. Specific Applications: 1947-1955 (1st Series) Trucks; 1949-1954 Passenger Cars

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-1949 TRUCK FIREWALL GROMMET 4-HOLE
SA-84
USD $3.50 EA
CHEVROLET 1947-1949 TRUCK FIREWALL GROMMET 4-HOLE
This is a rubber firewall grommet for 1947-1949 Chevrolet & GMC trucks. It has 4-holes for choke & throttle cables, temperature gauge tube & oil pressure line. Grommet has an OD of 1-5/8". Replaces GM# 3684771

For 1947 1948 1949 Chevrolet Trucks


Chevrolet Parts -  1949-52 HEATER CABLE FIREWALL SEAL
32-513
USD $6.59 EA
CHEVROLET 1949-52 HEATER CABLE FIREWALL SEAL
1949-52 Grommet. Heater vent control cable through firewall. For 3/4” hole in sheet metal. 3/16” sloping hole ID. All models.

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1947-62 4-HOLE FIREWALL GROMMET
CV-276
USD $7.15 EA
CHEVROLET 1947-62 4-HOLE FIREWALL GROMMET
Throttle cable oil line temperature line and choke cable. All models.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-49 TRUCK FIREWALL GROMMET KIT-6PCS
CV-310
USD $11.95 KIT
CHEVROLET 1947-49 TRUCK FIREWALL GROMMET KIT-6PCS
-

For 1947 1948 1949 Chevrolet Trucks


Chevrolet Parts -  1949-52 FIREWALL GROMMET-7/8" HOLE
32-394
USD $13.99 EA
CHEVROLET 1949-52 FIREWALL GROMMET-7/8" HOLE
1949-52 Grommet. Firewall utility for 7/8” hole in sheet metal. 1/8” ID x 1-3/16” OD. As required. Quality Rubber - Made in the USA!

For 1949 1950 1951 1952 Chevrolet Cars


Chevrolet Parts -  1949-52 CONVT TOP FIREWALL GROMMET
60-565
USD $42.49 EA
CHEVROLET 1949-52 CONVT TOP FIREWALL GROMMET
1949-52 Grommet. Convertible top hydraulic lines through firewall. Convertibles only.

For 1949 1950 1951 1952 Chevrolet Cars

Hardware
Chevrolet Parts -  1933-1955 SCISSORS FIREWALL INSULATOR CLIP
DC-611A
USD $3.95 EA
CHEVROLET 1933-1955 SCISSORS FIREWALL INSULATOR CLIP
This is a Factory Scissors Style Firewall Pad Retaining Clip for 1933-1954 Chevrolet & GMC cars & trucks. The clip is made in metal. Up to 9 pieces required per vehicle. Overall length is 1.5 inches. Also see CV-586 plastic retainer. Replaces GM# 3692752 Specific Applications: 1933-1955 Passenger Cars; 1947-1955 Chevy & GMC Trucks

For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks


Chevrolet Parts -  1947-55 PICKUP FIREWALL BRACES - STAINLESS
SA-425SS
USD $169.00 PR
CHEVROLET 1947-55 PICKUP FIREWALL BRACES - STAINLESS
This is a pair of Stainless Firewall Braces for 1947-1955 (1st Series) Chevrolet & GMC trucks. These braces extend from the firewall to the inner fender. Approx. 29-1/2" long.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks

Insulators
Chevrolet Parts -  1947-53 TRUCK FIREWALL INSULATOR
TC-1
USD $199.00 EA
CHEVROLET 1947-53 TRUCK FIREWALL INSULATOR
This firewall kickboard is made with ABS material and molded to fit the original the original transmission and firewall curves of 1947-1953 Chevrolet and GMC trucks. This pad comes in a leather grain texture finish with a properly punched insulation pad attached. Compare to you original insulator, see also TC-13. Made in the USA! Replaces GM# 3687451, 3693009 This product is over size and special shipping charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks


Chevrolet Parts -  1947-54 PU STREETROD FIREWALL INSULATOR
TC-21
USD $286.35 EA
CHEVROLET 1947-54 PU STREETROD FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1949-50 Passenger  FIREWALL INSULATOR
TC-P4950
USD $335.80 EA
CHEVROLET 1949-50 Passenger FIREWALL INSULATOR
Replace that dried-up torn or missing firewall insulator with a new one molded from tough ABS material. Made to fit transmission and firewall curves just like the originals. Not just a "stretched" piece of cardboard that fits poorly. Insulators are shipped ready to install; no cutting required. Give your restoration a finished appearance! These firewall insulators are a show quality piece and Made in the USA! This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars

22 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com