27 Items Found
Escutcheon Plates
This new reproduction escutcheon plate is for 1929-1933 Chevrolet passenger car inside door handles. It is also correct for 1932 Passenger windshield crank handle as well as 1932-1933 Sedan Delivery windshield crank handle. Each plate is chrome plated to a brilliant finish. The plates have four spikes on the back edge to keep the plate from moving against the upholstery. An exact part for show quality restorations. Dimensions: .275" High (Flat version) ID .757" (19.2mm), OD 1.805" (45.85mm). Replaces GM# 4210191 & 4034356.
Specific Applications:
1932 Passenger, also 1932-1933 Sedan Delivery windshield crank handle
For 1929 1930 1931 1932 1933 Chevrolet Cars
This new reproduction escutcheon plate is for 1929-1935 Chevrolet passenger car window crank handles. Each plate is chrome plated to a brilliant finish. The plates have four spikes on the back edge to keep the plate from moving against the upholstery. An exact part for show quality restorations. Dimensions: .460" High (Tall version), ID .757" (19.2mm), OD 1.805" (45.85mm). Replaces GM# 4059534 & 4210190
Specific Applications for this escutcheon:
1929-1933 Passenger Door Window Crank Handle;
1935 Master Passenger Front Door Window Crank Handle;1935 Master Coach & Town Sedan (Style #35-1001 & 1011) Quarter Window Crank Handle
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars
This chrome plated escutcheon plate fits Chevrolet cars & trucks
Specific Applications:
1927 Passenger cars for window & door handles.
Replaces GM#'s 349585, 372495, 379839
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars and Trucks
These interior polished stainless door handle trim rings are for 1929-1935 Roadster and Touring. Also fits 1930-32 Roadster Pickup
Specific Applications:
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Handle Bracket
ROADSTER & TOURING REMOTE HANDLE BRACKETFBO NO CURRENT SOURCE-11/2/12
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars
Handle Ferrules
This Chrome Outside Door & Trunk Handle Ferrule fits all 1928-1937 Chevrolet Passenger Cars & 1932-1937 Chevy & GMC Trucks. Used on most GM passenger cars & trucks in these years. Replaces GM# 361884, 4003748, 4280302.
Specific Applications:
1932-1937 Truck - Door & End Gate
Requires installation tool to spread inner diameter to fix in place on door or deck lid. See ferrule tool C-662.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
This Rubber & Cloth Grommet fits Door & Trunk Handle Ferrules for 1928-1937 Chevrolet & GMC cars & trucks. This is a special molded grommet that fits inside C-111 Chrome Ferrule. It seals against the door or trunk handle shaft and keeps the handle steady. Made like the originals, this grommet has a cloth covering molded into it. Used on most GM cars & truck in these years. Made in the USA! Replaces GM# 4210253
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
This tool is used for 1926-1937 GM cars and trucks using door and trunk handle ferrules such as C-111. Without it ferrules are very difficult to install after painting. Buy or rent this tool. You may return the tool - in good condition - and receive a refund of $30.00 - if you return within 30 days of purchase.
For 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars
Inside Door Handles
This chrome interior door handle is for 1931-1932 Chevrolet passenger cars, also 1932-1933 Sedan Delivery. These are a beautiful chrome reproduction of the inside door handle. Each handle is triple chrome plated with amazing attention to detail. In addition, they will fit 1933-1938 passenger cars (except 1935 Master) as an excellent quality replacement handle. Replaces GM# 4002980
1931-1932 Chevrolet Passenger Cars including Sedan Delivery (exc. Roadster & Touring)1933-1938 Passenger cars ( except 1935 Master) as a replacement handle
For 1931 1932 Chevrolet Cars
This stainless steel interior door handle is for 1929-35 open cars.
Specific Applications:
1930-1932 ROADSTER PICKUP
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Mounting Hardware
This is a Door & Window Handle Retainer Clip for 1929-1948 Chevrolet passenger cars. It is the Small Clip that was used up to 1948. Replaces GM# 4260037, 4090144
Specific Applications:
1949-1952 Station Wagon
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This sponge seal is used behind the escutcheon plate on door and windows on 1929-1936 Chevrolet cars & trucks. Replaces GM# 4023909, 4101894, 4110663 & 4240270. See also GM-A1267 Spring. 1-3/4" OD x 7/8" ID x 3/8" thick.One required per handle.\
For 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks
This screw is to retain the outside door handles on all Chevrolet passenger cars & Chevy & GMC trucks. One required per handle. Hex head with raised shoulder. Dimensions: 1/4-28 Thread, OL 9/16", Shoulder 1/4", OD of Shoulder 5/16". Replaces GM# 3654594.
Specific Applications:
1932-1935 Roadster & Phaeton - Open Models;
Also see FS-10595 for wave washer.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is the door handle to latch rod for 1929-1935 Chevrolet Roadster and Touring models. This rod is 16" in length.
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Outside Door Handles
These are chrome plated over steel.
For 1932 Chevrolet Cars
This chrome non-locking handle fits 1931 Chevrolet 4-door sedans on the left rear door. It also fits late 1932 Chevrolet trucks and all 1933 Chevy trucks on the right door. These are chrome plated over steel. (See AF-163 for early 1932 truck handle).
For 1931 1932 1933 Chevrolet Cars and Trucks
This beautifully chromed Non-Locking Outside Door Handle fits 1931-1932 Chevrolet cars & 1932-1933 trucks. The handle is for the LEFT FRONT on all passenger models, also RIGHT REAR on 4-door models. Also fits Chevrolet trucks in late 1932 thru 1933 on left door.
This handle is set up for mounting on both 1931 or 1932 cars with a square stud. 1931 had the end of the shaft drilled and tapped for a hex nut mounting. 1932 has a sideways hole in the shaft for a threaded lock pin. Handle comes with hex nut for 1931 applications. 1932 cars will need to order GR-212 lock pin separately. Replaces GM# 4004395
Specific Applications:
1932-1933 Trucks - LEFT (1932 Late, All 1933)
For 1932 1933 Chevrolet Cars and Trucks
This beautifully Chromed Outside Locking Door Handle fits all 1931-1932 Chevrolet passenger cars and 1932-1933 Sedan Delivery. The handle is for the Right Front on all passenger models. Also will fit Chevrolet trucks in late 1932 thru 1933 on right door. NOTE: trucks were not designed for locking handles and this handle will not lock the truck. See AF-141 for right side non-locking handle for trucks.
This handle is set up for mounting on both 1931 or 1932 cars with a square stud. 1931 had the end of the shaft drilled and tapped for a hex nut mounting. 1932 has a sideways hole in the shaft for a threaded lock pin. Handle comes with hex nut for 1931 applications. 1932 cars will need to order GR-212 lock pin separately. Replaces GM# 4004409, 4024070, 4039407
Specific Applications:
1932 Passenger Car - Right;
1932-1933 Trucks - Right (Replacement - Will NOT Lock)
For 1931 1932 1933 Chevrolet Cars and Trucks
This beautiful Polished STAINLESS Outside Door Handle is used on all Chevrolet trucks in 1931 and early 1932. The "T" handle design was changed in mid year 1932 to the 1931 passenger handle. This handle is held in place by two wood screws. The curved back bezel is fixed onto the handle and fits the contour of the rounded body molding. Replaces GM# 359550.
See AF-105 & AF-141 for late 1932 - 1933 truck outside handles.
For 1931 1932 Chevrolet Trucks
Quarter Window Handles
This is a Polished Stainless Steel Handle for 1931-1932 Chevrolet passenger cars for rear quarter window & back window. Handle is 2 3/4" Long. Replaces GM# 4200369
Specific Applications:1931-32 Sedan - Rear Quarter Window 1931-32 Coupe - Back Window
For 1931 1932 Chevrolet Cars
Removal Tools
(ALSO 1949-52 STATION WAGONS
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This Rubber Coated Steel Tool is simple to use and made to last. The design allows you to press your body to the tool, releasing pressure from the door panel to remove the locking clip. Keeps your hands free to remove fasteners.
For All Chevrolet Cars
Window Handles
This chrome window crank handle is for 1931-1932 Chevrolet passenger cars, also 1932-1933 Sedan Delivery. These are a beautiful chrome reproduction of the window crank handle. Each handle is triple chrome plated with amazing attention to detail. In addition, they will fit 1933-1938 passenger cars (except 1935 Master) as an excellent quality replacement handle. Overall length 4". Replaces GM# 4200270, 4002978
Specific Applications:
1932-1933 Sedan DeliveryReplacement for 1933-38 ( except 1935 Master)
For 1931 1932 Chevrolet Cars
This chrome window crank handle fits Chevrolet passenger cars & trucks. The square shank opening is 5/16". The overall length of the handle is 3-1/4" long. Replaces GM# 4200151
Specific Applications:
1925-1938 Chevrolet & GMC Trucks
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars and Trucks
This is a special Stainless Steel Window Crank Handle used on 1932 Chevrolet Cabriolet and Landau Phaeton models ONLY. This handle is about 3/4" longer than the standard handle used on all other Fisher Body cars. Made specifically for the double arm window regulators used in this year to give more leverage to crank the larger regulators. Replaces GM# 4026789.
For 1932 Chevrolet Cars
Windshield Crank Handles
Beautifully detailed reproduction in solid stainless steel. Polished to a shiny finish.3 7/8" LONG
For 1932 Chevrolet Cars
27 Items Found