10 Items Found
Bumpers & Seals
This is a set of hood lace hooks to be used with the hood lace with wire insert that was used on most GM vehicles from 1929-1939, including all Chevrolet cars & trucks. Each hook is designed to grab the wire that is inserted inside the hood lace and draw it tight to insure a clean installation. These are an exact match to the original hooks. They have a threaded shaft and come with a nut for tension. Replaces GM# 355568
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
Not an original item but can be used on any vehicle. Comes with two rivets.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars
This is a completely new reproduction of the original Cowl Hood Lace with Wire Insert that was used on most GM vehicles from 1929-1939, including all Chevrolet cars & trucks. Design & engineering took over a year to get an exact match. The material is a dark brown, close to black. Proper contours & beads that match original samples perfectly. Each strip is 3/4" Wide x 48" Long of fabric with a 52" wire inserted into it. Cut to length as required. NOTE: The hood lace is sold in individual 48" strips to fit most cowl applications. Mid-thirties cars also used this material on the radiator shell. To accommodate mid 30's vehicles where short sections are required on radiator shells, order one extra piece. ORDER TWO PIECES IF DOING A COWL AND A THIRD PIECE IF NEEDED ON THE RADIATOR SHELL. Early cars used hood lace without wire on the radiator shell. Order tension hooks AF-277 or clips set DS-106R separately. Made in the USA! Replaces GM# 374969.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Hardware
This STEEL rear hood hinge hold down bracket is used to attach the hood hinge to the cowl on 1933 Chevrolet Passenger vehicles and well as 1934-1946 Chevrolet and GMC trucks. Bolt centers are 1-1/2". Specific Applications: 1933 Passenger Vehicles; 1934-1946 Chevrolet Trucks; 1939-1946 GMC Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This STAINLESS STEEL rear hood hinge hold down bracket is used to attach the hood hinge to the cowl on 1933 Chevrolet Passenger vehicles and well as 1934-1946 Chevrolet and GMC trucks. Specific Applications: 1933 Passenger Vehicles 1934-1946 Chevrolet/GMC Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a Stainless REAR Hood Hinge Hold-Down for 1934-1935 Chevrolet passenger cars.
For 1934 1935 Chevrolet Cars
This is a Stainless FRONT Hood Hinge Hold-Down for 1934-1935 Chevrolet passenger cars.
For 1934 1935 Chevrolet Cars
Hinges
Note: this item must be modified to fit. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
For 1934 Chevrolet Cars
This is a universal replacement for the center hood hinge on 1934-1935 Standard Chevrolet passenger cars. The Overall Length is 36-11/16". The width is 1-1/2" wide. Bolt centers are at 2-1/2". Note: This item must be modified to fit. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
For 1934 1935 Chevrolet Cars
Props
This universal hood prop kit mounts on the radiator support "V" rod that mounts to the firewall. Used on cars & trucks with 4-piece hoods. Holds one side of the hood open at a time. These stainless kits make holding the hood open an easy task.
For 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars
10 Items Found