9 Items Found
Bumpers & Seals
This is a 5/16" Head Split Rivet - Zinc Plated. Used to install FS-118 Hood Lace onto the radiator shell. Approximately 20 used per radiator shell. Specific Applications: 1929-1932 Passenger Cars; 1929-1933 Trucks
For 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
This is Hood Lace without Wire for 1929-1933 Chevrolet cars & trucks. Used on many GM vehicles in this era. This hood lace is held in place with split rivets FS-11683 - sold separately. This Hood Lace is sold by the foot. NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
This is a set of hood lace hooks to be used with the hood lace with wire insert that was used on most GM vehicles from 1929-1939, including all Chevrolet cars & trucks. Each hook is designed to grab the wire that is inserted inside the hood lace and draw it tight to insure a clean installation. These are an exact match to the original hooks. They have a threaded shaft and come with a nut for tension. Replaces GM# 355568
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This is a completely new reproduction of the original Cowl Hood Lace with Wire Insert that was used on most GM vehicles from 1929-1939, including all Chevrolet cars & trucks. Design & engineering took over a year to get an exact match. The material is a dark brown, close to black. Proper contours & beads that match original samples perfectly. Each strip is 3/4" Wide x 48" Long of fabric with a 52" wire inserted into it. Cut to length as required. NOTE: The hood lace is sold in individual 48" strips to fit most cowl applications. Mid-thirties cars also used this material on the radiator shell. To accommodate mid 30's vehicles where short sections are required on radiator shells, order one extra piece. ORDER TWO PIECES IF DOING A COWL AND A THIRD PIECE IF NEEDED ON THE RADIATOR SHELL. Early cars used hood lace without wire on the radiator shell. Order tension hooks AF-277 or clips set DS-106R separately. Made in the USA! Replaces GM# 374969.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Hardware
This STEEL rear hood hinge hold down bracket is used to attach the hood hinge to the cowl on 1933 Chevrolet Passenger vehicles and well as 1934-1946 Chevrolet and GMC trucks. Bolt centers are 1-1/2". Specific Applications: 1933 Passenger Vehicles; 1934-1946 Chevrolet Trucks; 1939-1946 GMC Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This STAINLESS STEEL rear hood hinge hold down bracket is used to attach the hood hinge to the cowl on 1933 Chevrolet Passenger vehicles and well as 1934-1946 Chevrolet and GMC trucks. Specific Applications: 1933 Passenger Vehicles 1934-1946 Chevrolet/GMC Trucks
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This hood hinge hold down mounts to the radiator shell on 1932 Chevrolet Passenger cars and 1933 Chevy Trucks. This hold down is stamped in stainless. Made in the USA!
For 1932 1933 Chevrolet Cars and Trucks
Hinges
1929-32 Passenger & 1929-33 Truck. 1EA 1/4" x 33-1/8" 2EA 3/16" x 31-5/16"
For 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
Latches
This is a set of Hood Latch Bracket for 1932 Chevrolet Passenger Cars & 1933 Chevrolet Trucks. Set of four pieces for the Cowl & Radiator Shell. These are the brackets that hold the ends of the locking rods in place. One set required per vehicle.
For 1932 1933 Chevrolet Cars and Trucks
9 Items Found