FAX: (541) 258-6968
 
17 Items Found
Door Lock Sets
Chevrolet Parts -  1958 & 1961-1964 DOOR LOCK-LATER-LONG CYL
110
USD $24.95 SET
CHEVROLET 1958 & 1961-1964 DOOR LOCK-LATER-LONG CYL
This is a Door Lock Set for 1958 & 1961-1964 Chevrolet passenger cars. Set comes with two door locks with long case and keyed alike with later keys. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1958 & 1961-1964 DOOR LOCK-ORIG-LONG CYL
110A
USD $29.95 SET
CHEVROLET 1958 & 1961-1964 DOOR LOCK-ORIG-LONG CYL
This is a Door Lock Set for 1958 & 1961-1964 Chevrolet passenger cars. Set comes with two door locks with long case and keyed alike with Original keys. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars

Door, Trunk & Glove Box Sets
Chevrolet Parts -  1958 & 1963 DOOR/GLOVE/TRUNK LOCK-LATER
178
USD $44.95 SET
CHEVROLET 1958 & 1963 DOOR/GLOVE/TRUNK LOCK-LATER
This is a Door, Glove Box and Trunk Lock Set for 1958 & 1963 Chevrolet passenger cars. Set comes with two door locks with all locks keyed alike with later Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1958 & 1963 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
178A
USD $51.95 SET
CHEVROLET 1958 & 1963 DOOR/GLOVE/TRUNK LOCK-ORIGINAL
This is a Door, Glove Box and Trunk Lock Set for 1958 & 1963 Chevrolet passenger cars. Set comes with two door locks with all locks keyed alike with original Keys. Also included are mounting clips & gaskets. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1958 1959 1960 1961 1962 1963 Chevrolet Cars

Glove Box Locks
Chevrolet Parts -  1958-1960 & 1963 GLOVE BOX LOCK-LATER KEYS
168
USD $19.95 SET
CHEVROLET 1958-1960 & 1963 GLOVE BOX LOCK-LATER KEYS
This is a new glove box lock cylinder with later style GM keys for 1958-1963 Chevrolet passenger cars. Replaces GM# 3829958, 38920889 Specific Applications: 1958-1960 Chevrolet Passenger cars; 1963 Chevrolet Passenger cars

For 1958 1959 1960 1961 1962 1963 Chevrolet Cars


Chevrolet Parts -  1940-1972 GLOVE BOX LOCK-LATER STYLE KEYS
169
USD $21.95 SET
CHEVROLET 1940-1972 GLOVE BOX LOCK-LATER STYLE KEYS
This is a new glove box lock cylinder with later style GM keys for 1940-1972 Chevrolet & GMC passenger cars & trucks. Replaces GM# 1394994, 3732065, 4099315 Specific Applications: 1940-1957 Passenger; 1961-1962 Passenger; 1954-1972 Truck

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks


Chevrolet Parts -  1940-62 CAR/1954-72 TRK GLOVE BOX LOCK-ORIG
DS-429A
USD $22.95 EA
CHEVROLET 1940-62 CAR/1954-72 TRK GLOVE BOX LOCK-ORIG
This is a new glove box lock cylinder with original style GM keys for 1940-1972 Chevrolet & GMC passenger cars & trucks. Replaces GM# 1394994, 3732065, 4099315 Specific Applications: 1940-1957 Passenger; 1961-1962 Passenger; 1954-1972 Truck

For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Ignition & Door Lock Sets
Chevrolet Parts -  1959-1960 PASS IGNITION & DOOR LOCKS-ORIGINAL
457
USD $39.95 SET
CHEVROLET 1959-1960 PASS IGNITION & DOOR LOCKS-ORIGINAL
This is a Set of Ignition & Door Locks for 1959-1960 Chevrolet passenger cars. Kit comes complete with the ignition & two door locks. Comes with two Original GM keys, lock clips and mounting gaskets. Door locks are long case with pawls. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1959 1960 Chevrolet Cars


Chevrolet Parts -  1958/61-64 IGN/DOOR LOCK-ORIGINAL
160A
USD $41.95 SET
CHEVROLET 1958/61-64 IGN/DOOR LOCK-ORIGINAL
This is an Ignition & Door Lock Cylinder Set with matching keys for 1958 & 1961-1964 Chevrolet passenger cars. This set comes with long door lock cylinders. Check your originals before ordering. Specific Applications: 1958 Passenger; 1961-1964 Passenger CHECK LENGTH OF DOOR LOCK CYLINDER, SHORT(250)=1-3/8", LONG(160,160A)=1-7/8Special Note! The pawl is the small bracket which attaches to the end of the door cylinders. The is what actually reaches in and trips the latch for the door to unlock. In 1955-57 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the flat egg shaped pawl. The higher located body body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models us the flat pawl and a different door latch assembly. In 1958 -64 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement. Octagon key head.

For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars


Chevrolet Parts -  1959-1964 IGN/DOOR LOCK-ORIG-SHORT CYL
250
USD $58.95 SET
CHEVROLET 1959-1964 IGN/DOOR LOCK-ORIG-SHORT CYL
This is a Ignition & Door Lock Set for 1959-1964 Chevrolet passenger cars. Set comes with two short case door locks with flat pawl, ignition lock all keyed alike with Original keys. Special Note: Door locks come with lock pawls. The Pawl is the small bracket which attaches to the end of the door cylinders. The pawl is what actually reaches in and trips the latch for the door to unlock. In 1955-1957 two completely different pawls were installed according to body styles. The U-shaped pawl, which is the most common, and the Flat egg shaped pawl. The higher located body side moldings on some 1956 models forced GM to move the door lock cylinder higher up on the door. This is why many of the 1956 models used the Flat pawl and a different door latch assembly. In 1958-1964 two different styles and lengths of door cylinders were used. The 2-door hardtop and convertible models used the long cylinder, with 4-door and sedan models using short cylinders. When possible it is best to check the old original door locks for a specific cylinder style and pawl requirement.

For 1959 1960 1961 1962 1963 1964 Chevrolet Cars

Ignition Door & Glovebox Lock Sets
Chevrolet Parts -  1960-66 TRUCK IGN/DOOR/GLOVE LOCKS
286
USD $89.95 SET
CHEVROLET 1960-66 TRUCK IGN/DOOR/GLOVE LOCKS
Comes with Original style keys.

For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars

Ignition Lock Cylinders
Chevrolet Parts -  1953-1966 IGNITION LOCK CYLINDER WITH KEYS
FS-165
USD $14.95 EA
CHEVROLET 1953-1966 IGNITION LOCK CYLINDER WITH KEYS
This is a Lock Cylinder with Original Keys for 1953-1966 Chevrolet & GMC cars & trucks. Replaces GM# 3703446, 3716725, 1458180 Specific Applications: 1953-1966 Chevrolet Passenger; 1955-1966 (2nd Series) Trucks; 1954-1960 Buick - Some Models

For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks

Key Blanks
Chevrolet Parts -  1936-66 TRUNK/GLOVE BOX KEY BLANK
FS-17701
USD $3.25 EA
CHEVROLET 1936-66 TRUNK/GLOVE BOX KEY BLANK
This is an original style Hexagon Round Key Blank for Trunk or Glove Box on 1935-1966 Chevrolet & GMC cars & Trucks. Replaces GM# 601272

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks


Chevrolet Parts -  1936-1966 HEX HEAD IGNITION/DOOR KEY BLANK
FS-17700
USD $3.25 EA
CHEVROLET 1936-1966 HEX HEAD IGNITION/DOOR KEY BLANK
This is an original style Hexagon Head Key Blank for Ignition & Door on 1935-1966 Chevrolet & GMC cars & Trucks. Replaces GM# 3694624, B-10, 32318

For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks

Lock Hardware
Chevrolet Parts -  UNIV. LOCK CYLINDER RETAINER CLIP
FS-17755
USD $0.95 EA
CHEVROLET UNIV. LOCK CYLINDER RETAINER CLIP
This is a universal lock cylinder retainer clip with a 3/4" opening. Can be used on door or trunk lock cylinders with a 3/4" lock slot opening.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks


Chevrolet Parts -  1926-69 FERRULE & LOCK CYLINDER GASKET
CV-641
USD $1.00 EA
CHEVROLET 1926-69 FERRULE & LOCK CYLINDER GASKET
Fits 1926-37 Cars on door ferrule; 1932-37 Trucks on door ferrule; 1951-69 Cars on truck lock cylinder; 1960-69 Cars & Trucks on door lock cylinders. Use under lock cylinder to protect paint. Also can be used on early door and trunk ferrules (C-111) to protect paint.

For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 Chevrolet Cars and Trucks

Trunk Locks
Chevrolet Parts -  1951-64 REPLACEMENT TRUNK LOCK & KEY
FS-358
USD $14.95 EA
CHEVROLET 1951-64 REPLACEMENT TRUNK LOCK & KEY
This is a Replacement Trunk Lock Cylinder with Original Style GM keys for 1951-1964 Chevrolet passenger cars (exc. Station Wagon or Sedan Delivery). The cylinder has a flat faced cap. Replaces GM# 3697944

For 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars

17 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com