FAX: (541) 258-6968v
 
New CustomersLogin
  1. The Filling Station »
  2. 1949 Chevrolet Car Parts »
  3. Body »
  4. Repair Panels »
Filters
Vehicle: Car - Switch To Truck / All
Year: 1949 - Clear Filter

Cargo Floor
Chevrolet Parts - 1949-54 SDL CARGO FLOOR SUPPORT BRACKET KIT
GR-627
USD $162.00 EA
CHEVROLET 1949-54 SDL CARGO FLOOR SUPPORT BRACKET KIT
This kit replaces the structure that holds up the front part of the load floor over the rear floor pan area just behind the drivers seat and includes all brackets and risers. Made in the USA.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Floor Panels
Chevrolet Parts - 1949-50 PASSENGER REAR FLOOR KIT
GR-431
USD $344.00 KIT
CHEVROLET 1949-50 PASSENGER REAR FLOOR KIT
This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-50 PASS FRONT FLOOR KIT - UNIV
GR-429
USD $349.00 KIT
CHEVROLET 1949-50 PASS FRONT FLOOR KIT - UNIV
This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-50 PASS FRONT FLOOR KT-4" SETBACK
GR-430
USD $358.00 KIT
CHEVROLET 1949-50 PASS FRONT FLOOR KT-4" SETBACK
This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS FULL FLOOR ASSEMBLY W/BRACES
GR-642
USD $1,475.00 EA
CHEVROLET 1949-52 PASS FULL FLOOR ASSEMBLY W/BRACES
This is a Full Floor Replacement including Braces for all 1949-1952 Chevrolet passenger cars. This part is oversize and must be shipped via Truck freight. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars
Gas Tank Hardware
Chevrolet Parts - UNIVERSAL ACCESS DOOR ASSEMBLY
901001
USD $19.95 EA
CHEVROLET UNIVERSAL ACCESS DOOR ASSEMBLY
This UNIVERSAL access door assembly is made for STREET RODS ONLY and can be used to gain access through the floor to the master cylinder, hard to grease joints or other areas you occasionally need to get to. 7-1/4" X 5"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 Chevrolet Cars and Trucks
Quarter Panels
Chevrolet Parts - 1949-1952 CAR INNER REAR QUARTER PANEL - LEFT
GR-625L
USD $78.00 EA
CHEVROLET 1949-1952 CAR INNER REAR QUARTER PANEL - LEFT
INNER REAR QTR PANEL-LEFT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-1952 CAR INNER REAR QUARTER PANEL-RIGHT
GR-625R
USD $78.00 EA
CHEVROLET 1949-1952 CAR INNER REAR QUARTER PANEL-RIGHT
INNER REAR QTR PANEL-RIGHT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 REAR FENDER-REAR SECTION R.
725-60R
Wait List
CHEVROLET 1949-52 REAR FENDER-REAR SECTION R.
REAR SECTION-RIGHT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-50 QUARTER PANEL - OEM - REAR LEFT
AF-189L
USD $210.00 EA
CHEVROLET 1949-50 QUARTER PANEL - OEM - REAR LEFT
18 GAUGE STEEL

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-50 QUARTER PANEL - OEM - REAR RIGHT
AF-189R
USD $210.00 EA
CHEVROLET 1949-50 QUARTER PANEL - OEM - REAR RIGHT
18 GAUGE STEEL

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-52 QUARTER PANEL - OEM - FRONT LEFT
AF-234L
USD $210.00 EA
CHEVROLET 1949-52 QUARTER PANEL - OEM - FRONT LEFT
This is a Quarter Panel FRONT Repair Panel for 1949-1952 Chevrolet 2-Door Models (exc. Convertible or Hardtop). Specify Right or Left when ordering. This part is 18 gauge steel and Made in the USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 QUARTER PANEL - OEM - FRONT RIGHT
AF-234R
USD $210.00 EA
CHEVROLET 1949-52 QUARTER PANEL - OEM - FRONT RIGHT
This is a Quarter Panel FRONT Repair Panel for 1949-1952 Chevrolet 2-Door Models (exc. Convertible or Hardtop). Specify Right or Left when ordering. This part is 18 gauge steel and Made in the USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-1952 CONV & HT QUARTER PANEL - FRONT LEFT
AF-657L
USD $210.00 EA
CHEVROLET 1949-1952 CONV & HT QUARTER PANEL - FRONT LEFT
THOSE 1949-52 CHEVROLET CONVERTIBLE AND 2 DOOR HARDTOPS GET MORE POPULAR EVERY DAY AND MORE NEW SHEETMETAL PARTS ARE NEEDED. SO THE GUYS AT EMS AUTOMOTIVE HAVE CREATED A MADE TO FIT LOWER FRONT 1/4 PANEL FOR THE HARDTOP AND CONVERTIBLE MODELS. MADE FROM HEAVY 18 GAGE STEEL THIS PART GOES FROM THE BACK EDGE OF THE FRONT DOOR AND EXTENDS REARWARD 1/3 INTO THE FRONT PART OF THE REAR WHEEL OPENING. MADE TO FIT THE UNIQUE DOOR JAMB OF THE CONVERTIBLE /HARDTOP MODELS.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-1952 CONV & HT QUARTER PANEL-FRONT RIGHT
AF-657R
USD $210.00 EA
CHEVROLET 1949-1952 CONV & HT QUARTER PANEL-FRONT RIGHT
THOSE 1949-52 CHEVROLET CONVERTIBLE AND 2 DOOR HARDTOPS GET MORE POPULAR EVERY DAY AND MORE NEW SHEETMETAL PARTS ARE NEEDED. SO THE GUYS AT EMS AUTOMOTIVE HAVE CREATED A MADE TO FIT LOWER FRONT 1/4 PANEL FOR THE HARDTOP AND CONVERTIBLE MODELS. MADE FROM HEAVY 18 GAGE STEEL THIS PART GOES FROM THE BACK EDGE OF THE FRONT DOOR AND EXTENDS REARWARD 1/3 INTO THE FRONT PART OF THE REAR WHEEL OPENING. MADE TO FIT THE UNIQUE DOOR JAMB OF THE CONVERTIBLE /HARDTOP MODELS.

For 1949 1950 1951 1952 Chevrolet Cars
Rocker Panels
Chevrolet Parts - 1949-52 2DR INNER ROCKER REPAIR PANEL
GR-246
USD $58.80 EA
CHEVROLET 1949-52 2DR INNER ROCKER REPAIR PANEL
1949-52 2DR INNER ROCKER REPAIR PANEL 45" OVERALL LENGTH This part is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 2-DOOR MODELS ROCKER PANEL - RIGHT
GR-418R
USD $144.00 EA
CHEVROLET 1949-52 2-DOOR MODELS ROCKER PANEL - RIGHT
FITS 2DR SEDAN, COUPE & HARDTOP MODELS.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 2-DOOR MODELS ROCKER PANEL - LEFT
GR-418L
USD $144.00 EA
CHEVROLET 1949-52 2-DOOR MODELS ROCKER PANEL - LEFT
FITS 2DR SEDAN, COUPE & HARDTOP MODELS.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 ROCKER PANEL-W/EXT 4DR LEFT
725-03L
USD $195.00 EA
CHEVROLET 1949-52 ROCKER PANEL-W/EXT 4DR LEFT
W/EXT 4DR LEFT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 ROCKER PANEL W/EXT 4DR RT.
725-03R
USD $198.00 EA
CHEVROLET 1949-52 ROCKER PANEL W/EXT 4DR RT.
W/EXT 4DR RIGHT

For 1949 1950 1951 1952 Chevrolet Cars
Sealers
Chevrolet Parts - 3M HEAVY DRIP-CHEK SEALER - 5 OZ.
08531
USD $29.95 EA
CHEVROLET 3M HEAVY DRIP-CHEK SEALER - 5 OZ.
This sealer is a gray colored, paintable, fast drying, flexible sealer used to seal body seams. Use to seal small cracks and other openings, such as drip rails, molding, cowling and welded seams. The heavy consistency makes this sealer especially suitable for vertical seams. Used by professionals for a quality job. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.

For All Chevrolet Cars and Trucks
Chevrolet Parts - 3M STRIP CALK
08578
USD $41.52 EA
CHEVROLET 3M STRIP CALK
Box of 60 - one foot pieces. *NOTE: LIQUIDS AND FLAMMABLES CAN NOT BE SHIPPED VIA AIR. NO OVERSEAS SHIPMENTS ON THIS ITEM, GROUND FREIGHT FOR CONTINENTAL U.S. ORDERS ONLY.

For 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 Chevrolet Cars and Trucks
Tail Pans
Chevrolet Parts - 1949-50 PASS (EXC FLEETLINE) LOWER TRUNK PANEL
AF-100
USD $372.00 EA
CHEVROLET 1949-50 PASS (EXC FLEETLINE) LOWER TRUNK PANEL
Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars
Chevrolet Parts - 1949-50 FLEETLINE LOWER TRUNK PANEL
GR-464
USD $372.00 EA
CHEVROLET 1949-50 FLEETLINE LOWER TRUNK PANEL
Exterior sheet metal panel below trunk lid. A quality part, Made in USA! This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 Chevrolet Cars
Trunk Area
Chevrolet Parts - 1949-1952 CAR FULL TRUNK FLOOR W-BRACES
GR-640
USD $999.95 EA
CHEVROLET 1949-1952 CAR FULL TRUNK FLOOR W-BRACES
This is a Complete Trunk Floor Panel with Braces for 1949-1952 Chevrolet passenger cars. This item must be shipped via Truck Freight. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars
Trunk Floor Panels
Chevrolet Parts - 1949-52 REAR FLOOR BRACE - LEFT
GR-461L
USD $59.95 EA
CHEVROLET 1949-52 REAR FLOOR BRACE - LEFT
DRIVER SIDE

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 REAR FLOOR BRACE - RIGHT
GR-461R
USD $59.95 EA
CHEVROLET 1949-52 REAR FLOOR BRACE - RIGHT
PASSENGER SIDE

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS CENTER FLOOR BRACE-LEFT
GR-503L
USD $59.95 EA
CHEVROLET 1949-52 PASS CENTER FLOOR BRACE-LEFT
PASS CENTER FLOOR BRACE-LEFT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS CENTER FLOOR BRACE-RIGHT
GR-503R
USD $59.95 EA
CHEVROLET 1949-52 PASS CENTER FLOOR BRACE-RIGHT
PASS CENTER FLOOR BRACE-RIGHT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS FRONT FLOOR BRACE
GR-502
USD $67.50 EA
CHEVROLET 1949-52 PASS FRONT FLOOR BRACE
1949-1952 CHEVROLET CAR HAVE 3 ROWS OF FLOOR BRACES IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN BODY STRUCTURE VIA THERE ATTACHMENT TO THE FLOOR PAN, INNER ROCKER AND THEN FRAME. THESE FLOOR BRACES ARE COMMON AREAS FOR RUST TO START, HIDDEN UNDER THE CAR, THEIR REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT OR REAR FLOOR PANS ARE REPLACED. DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS DOOR POST BRACE-LEFT
GR-507L
USD $97.20 EA
CHEVROLET 1949-52 PASS DOOR POST BRACE-LEFT
THE 1949-52 CHEVROLET HAS A UNUSUAL DOOR POST REINFORCEMENT BRACE IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN DOOR POST STRUCTURE VIA THIS ATTACHMENT TO THE FLOOR PAN , INNER ROCKER, TOE BOARD, AND THEN BOLTED TO THE FRAME. THE DOOR POST BRACES ARE COMMON AREA’S FOR RUST TO START, HIDDEN UNDER THE FLOOR-MAT.  THERE REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT FLOOR PANS OR TOE BOARDS ARE REPLACED. IMPOSSIBLE TO FABRICATE, EMS AUTOMOTIVE HAS DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS DOOR POST BRACE-RIGHT
GR-507R
USD $97.20 EA
CHEVROLET 1949-52 PASS DOOR POST BRACE-RIGHT
THE 1949-52 CHEVROLET HAS A UNUSUAL DOOR POST REINFORCEMENT BRACE IN THE PASSENGER COMPARTMENT TO SUPPORT THE MAIN DOOR POST STRUCTURE VIA THIS ATTACHMENT TO THE FLOOR PAN , INNER ROCKER, TOE BOARD, AND THEN BOLTED TO THE FRAME. THE DOOR POST BRACES ARE COMMON AREA’S FOR RUST TO START, HIDDEN UNDER THE FLOOR-MAT.  THERE REPLACEMENT IS USUALLY REQUIRED WHEN NEW FRONT FLOOR PANS OR TOE BOARDS ARE REPLACED. IMPOSSIBLE TO FABRICATE, EMS AUTOMOTIVE HAS DIE STAMPED IN THE USA FROM 16 GAGE STEEL FOR A PRECISION FIT.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS REAR TRUNK FLOOR BRACE
GR-504
USD $118.80 EA
CHEVROLET 1949-52 PASS REAR TRUNK FLOOR BRACE
PASS REAR TRUNK FLOOR BRACE

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASSENGER CAR TOE BOARD-LEFT
725-40L
USD $138.00 EA
CHEVROLET 1949-52 PASSENGER CAR TOE BOARD-LEFT
LEFT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASSENGER CAR TOE BOARD-RIGHT
725-40R
USD $138.00 EA
CHEVROLET 1949-52 PASSENGER CAR TOE BOARD-RIGHT
RIGHT

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS INNER TRUNK FLOOR EXTENSION
GR-478
USD $178.79 EA
CHEVROLET 1949-52 PASS INNER TRUNK FLOOR EXTENSION
BEHIND LOWER OUTER TRUNK PANEL

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS FRONT FLOOR PAN - LEFT
GR-128L
USD $198.00 EA
CHEVROLET 1949-52 PASS FRONT FLOOR PAN - LEFT
34 inch long x 24 inch wide

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS FRONT FLOOR PAN - RIGHT
GR-128R
USD $198.00 EA
CHEVROLET 1949-52 PASS FRONT FLOOR PAN - RIGHT
34 inch long x 24 inch wide

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-54 PASS FRONT TRANS TUNNEL
GR-505
USD $210.00 EA
CHEVROLET 1949-54 PASS FRONT TRANS TUNNEL
PROUDLY MANUFACTURED BY EMS AUTOMOTIVE  FOR THE 1949-52 CHEVROLET THE TRANSMISSION TUNNEL SECTION LOCATED AT THE FRONT OF THE PASSENGER COMPARTMENT. MADE FROM HEAVY 18 GAGE STEEL THE TRANSMISSION TUNNEL SECTION HAS ALL THE COMPLEX OEM STYLE SHAPES AND CURVES TO FIT CORRECTLY WITH ADJACENT FLOOR PANS AND THE OEM FIREWALL. WILL ALSO WORK WITH TURBO 350/400 AND 700R4 TRANSMISSIONS WHEN PROPER CROSSMEMBER IS USED. MADE TO WELD IN PLACE.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS REAR FLOOR PAN-OEM STYLE-LEFT
GR-477L
USD $210.00 EA
CHEVROLET 1949-52 PASS REAR FLOOR PAN-OEM STYLE-LEFT
LEFT SIDE

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 PASS REAR FLOOR PAN-OEM STYLE-RIGHT
GR-477R
USD $210.00 EA
CHEVROLET 1949-52 PASS REAR FLOOR PAN-OEM STYLE-RIGHT
RIGHT SIDE

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1941-1954 PASSENGER CAR SPARE TIRE WELL
726-29
USD $215.00 EA
CHEVROLET 1941-1954 PASSENGER CAR SPARE TIRE WELL
1953-1954 Chevrolet Passenger Car Spare Tire Well, All Except Wagon/Sedan Delivery. Will Also Fit Most 1941-1952 Chevrolet cars with slight modification. MADE IN THE USA FROM THICK 18 GAGE STEEL AND DRAWN TO DEEP DEPTH THIS PART REPLICATES THE MUCH NEEDED VERTICAL SPARE TIRE WELL.

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Chevrolet Parts - 1949-52 2DR SED&COUPE DOOR BOTTOM-LEFT
AF-236L
USD $238.80 KIT
CHEVROLET 1949-52 2DR SED&COUPE DOOR BOTTOM-LEFT
does not fit hardtop and convertible.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 2DR SED&COUPE DOOR BOTTOM-RIGHT
AF-236R
USD $238.80 KIT
CHEVROLET 1949-52 2DR SED&COUPE DOOR BOTTOM-RIGHT
does not fit hardtop and convertible.

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1953-1954 2DR DOOR BOTTOM - LEFT
AF-526L
USD $238.80 EA
CHEVROLET 1953-1954 2DR DOOR BOTTOM - LEFT
THIS 1953/54 CHEVROLET DOOR BOTTOM KIT IS MADE WITH A 18 GAGE DIE STAMPED STEEL INNER STRUCTURE AND A DIE STAMPED 20 GAGE STEEL OUTER SKIN. THE INNER STRUCTURE HAS ALL THE CURVES AND SHAPES OF A OEM DOOR AND THE OUTER SKIN IS SMOOTH AND WRINKLE FREE, ALSO INCLUDE IS A 5/8” HEM FLANGE ON EACH DOOR SKIN FOR THE BEST IN OEM STYLE FIT. THIS KIT FITS: 1953/54 CHEVROLET ALL 2 DOOR BODY STYLES WITH POST STYLE DOORS MADE IN THE USA BY EMS AUTOMOTIVE. GOES UP 10 INCHES ON THE DOOR

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1953-1954 2DR DOOR BOTTOM - RIGHT
AF-526R
USD $238.80 KIT
CHEVROLET 1953-1954 2DR DOOR BOTTOM - RIGHT
THIS 1953/54 CHEVROLET DOOR BOTTOM KIT IS MADE WITH A 18 GAGE DIE STAMPED STEEL INNER STRUCTURE AND A DIE STAMPED 20 GAGE STEEL OUTER SKIN. THE INNER STRUCTURE HAS ALL THE CURVES AND SHAPES OF A OEM DOOR AND THE OUTER SKIN IS SMOOTH AND WRINKLE FREE, ALSO INCLUDE IS A 5/8” HEM FLANGE ON EACH DOOR SKIN FOR THE BEST IN OEM STYLE FIT. THIS KIT FITS: 1953/54 CHEVROLET ALL 2 DOOR BODY STYLES WITH POST STYLE DOORS MADE IN THE USA BY EMS AUTOMOTIVE. GOES UP 10 INCHES ON THE DOOR

For 1949 1950 1951 1952 Chevrolet Cars
Chevrolet Parts - 1949-52 CHEVROLET SEDAN DELIVERY TAIL PAN
AF-498
USD $372.00 EA
CHEVROLET 1949-52 CHEVROLET SEDAN DELIVERY TAIL PAN
A TAIL-PAN FOR UNDER THE REAR CARGO DOOR, A COMMON RUST AREA. THIS TAIL-PAN FITS DIRECTLY UNDER THE REAR CARGO DOOR AND EXTENDS FROM FENDER TO FENDER. MADE FROM HEAVY 18 GAGE STEEL AND FORMED TO FIT CORRECTLY. WILL ALSO FIT 49-52 PONTIAC SEDAN DELIVERY. This item is oversize and special freight charges will apply. Call or email us for a freight quote.

For 1949 1950 1951 1952 Chevrolet Cars and Trucks
Chevrolet Parts - 1949-54 SEDAN DELIVERY CARGO AREA FLOOR PAN
AF-500
USD $402.00 EA
CHEVROLET 1949-54 SEDAN DELIVERY CARGO AREA FLOOR PAN
DESIGNED TO REPLACE A RUSTED OUT CARGO FLOOR. IT REPLACES THE WOOD PANELS BEHIND THE DRIVERS SEAT WITH HIGH STRENGTH STEEL PANELS TO FIT INTO THE STOCK FRAME, AND EXTENDS REARWARD COMPLETELY FLAT TO THE REAR CARGO DOOR. THE SPARE TIRE WELL OPENING HAS BEEN ELIMINATED, PROPER CUTOUTS FOR THE SHOCK TOWERS AND FUEL TANK FILLER HAVE BEEN PRECISION CUT. MADE IN THE U.S.A. FROM 18 GAGE STEEL.

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
  1. The Filling Station »
  2. 1949 Chevrolet Car Parts »
  3. Body »
  4. Repair Panels »
Filters
Vehicle: Car - Switch To Truck / All
Year: 1949 - Clear Filter

Copyright ©2025 The Filling Station, LLC
E-mail: fssales@fillingstation.com