The 1955-1957 cargo floor extension fits Chevrolet Nomad and wagon models only. The cargo floor extensions go directly on both sides of the spare tire well. Two floor extensions are required if you are needing to replace both sides.
1955-1957 Chevrolet Station Wagon Full Cargo Floor. 48" x 35" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This left hand brace fits all of the 1955 car models, but only the 1956-57 convertible. This brace connects the inner dash kick panel area down to the front corners of the front floor pans.
This right hand brace fits all of the 1955 car models, but only the 1956-57 convertible. This brace connects the inner dash kick panel area down to the front corners of the front floor pans.
This is a 1955-1957 Chevrolet passenger car inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad. Specify Right or Left when ordering.
This is a 1955-1957 Chevrolet passenger car inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad. Specify Right or Left when ordering.
This is the "A" pillar reinforcement for the 1955-1957 Chevrolet hardtop and convertible models. This reinforcement adds support to the door hinge pillar. It is welded to the lower inner cowl area below the door hinge. Specify Right or Left when ordering.
This is the "A" pillar reinforcement for the 1955-1957 Chevrolet hardtop and convertible models. This reinforcement adds support to the door hinge pillar. It is welded to the lower inner cowl area below the door hinge. Specify Right or Left when ordering.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
These 1955-1957 inside door handle reinforcements can be welded to the inside of the door skin for more support to the exterior door handles. They fit all models. Sold as a pair.
Bring your rusted door back to life with a patch. If your door needs more then a skin, check out our full door shells. Get your car back to new again in no time.
Bring your rusted door back to life with a patch. If your door needs more then a skin, check out our full door shells. Get your car back to new again in no time.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It includes the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It includes the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a 1955-57 Chevrolet OEM factory style door skin for 2 door sedan. It has the top flange, however, the window frame is not included. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a 1955-57 Chevrolet OEM factory style door skin for 2 door sedan. It has the top flange, however, the window frame is not included. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a 1955-1957 "B" pillar bracket for the convertible models. This bracket joins the "B" pillar to the "B" pillar brace. Specify right or left when ordering.
This is a 1955-1957 "B" pillar bracket for the convertible models. This bracket joins the "B" pillar to the "B" pillar brace. Specify right or left when ordering.
This is a 1955 radiator saddle filler panel for the left side. The panel fills in between the radiator and inner fender wall. It is a great way to add stability and keep your engine compartment clean.
This is a full length floor repair panel for 1955-1957 Chevrolet Sedan, Sedan Delivery, Station Wagon & Nomad Wagon. Dimensions: 32" x 80". Stamped steel panel in 19 gauge sheet metal. Specify Right or Left when ordering. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This is a full length floor repair panel for 1955-1957 Chevrolet Sedan, Sedan Delivery, Station Wagon & Nomad Wagon. Dimensions: 32" x 80". Stamped steel panel in 19 gauge sheet metal. Specify Right or Left when ordering. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This is a half floor repair panel for 1955-1957 Chevrolet convertible & hardtop models. Specify Right or Left when ordering. This item must be sent via truck freight. Special freight charges will apply. Call or email us for a freight quote.
This is a half floor repair panel for 1955-1957 Chevrolet convertible & hardtop models. Specify Right or Left when ordering. This item must be sent via truck freight. Special freight charges will apply. Call or email us for a freight quote.
This is a full floor and will be a tremendous time saver for anyone restoring a 1955-1957 Chevrolet Hardtop. The floor goes from the toeboard to under the rear seat, complete with the transmission hump. All of the floor braces are pre-welded onto the floor assembly. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This is a full floor and will be a tremendous time saver for anyone restoring a 1955-1957 Chevrolet convertible. The floor goes from the toeboard to under the rear seat, complete with the transmission hump. All of the floor braces are pre-welded onto the floor assembly. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This UNIVERSAL access door assembly is made for STREET RODS ONLY and can be used to gain access through the floor to the master cylinder, hard to grease joints or other areas you occasionally need to get to. 7-1/4" X 5"
This is a four piece 1955-57 gas tank locator kit. It mounts the front of the tank straps to the bottom of the trunk floor. It fits all Chevrolet models.
This is a 1955-57 car kick panel retainer. The retainer holds the lower edges of the kick panels. It's welded next to the toe boards. This piece fits both left and right sides.
Get the proper drainage with this left hand side 1955-57 convertible drain channel. The channel is located underneath the rear pinchwelt behind the rear seat.
This is a left hand 1955-1957 inner front quarter panel for the convertible models. The panel comes with an access hole for the window. This is the panel that goes over the top of the inner wheel well and is next to the rear seat area.
This is a right hand 1955-1957 inner front quarter panel for the convertible models. The panel comes with an access hole for the window. This is the panel that goes over the top of the inner wheel well and is next to the rear seat area.
This sheet metal repair panel is a full rear quarter panel for 1956 Chevrolet Hardtop & Convertible models. Can be modified to fit Sedan or Sedan Delivery. The difference between a full quarter panel and a skin is that a full panel includes the door jamb opening, trunk opening and part of the roof line. Quarter panel skins are just the outer skin, covering the entire side of the quarter from the door edge to the tail pan. Specify Right or Left when ordering. This item is oversize and must be shipped via truck freight, special shipping charges will apply. Call or email us for a freight quote.
This sheet metal repair panel is a full rear quarter panel for 1956 Chevrolet Hardtop & Convertible models. Can be modified to fit Sedan or Sedan Delivery. The difference between a full quarter panel and a skin is that a full panel includes the door jamb opening, trunk opening and part of the roof line. Quarter panel skins are just the outer skin, covering the entire side of the quarter from the door edge to the tail pan. Specify Right or Left when ordering. This item is oversize and must be shipped via truck freight. Call or email us for a freight quote.
This is the 1955-1957 Chevrolet passenger front lower curved radiator splash pan. This pan fills the gap between the core support and cross member. The pan is attached to the bottom edge of the inner fender behind the core support. Specify Right or Left when ordering.
This is the 1955-1957 Chevrolet passenger front lower curved radiator splash pan. This pan fills the gap between the core support and cross member. The pan is attached to the bottom edge of the inner fender behind the core support. Specify Right or Left when ordering.