40 Items Found
Belt Line Window Felts
CHEVROLET 1964-66 TRUCK BELTLINE WINDOW FELT
The belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
For 1964 1965 1966 Chevrolet Trucks
Regulators
CHEVROLET 1964-66PU WINDOW REGULATOR - LEFT
This is a door window regulator for 1964-1966 Chevrolet & GMC trucks. Specify Right or Left when ordering. Replaces GM# 3833541, 3833542
For 1964 1965 1966 Chevrolet Trucks
Universal Felt Channel Liner-Wide
CHEVROLET UNIVERSAL FELT CHANNEL LINER-WIDE
This is a Universal Window Channel Liner that is 2-5/8" Wide. Sold by the foot, this felt is used to reline window channels that cannot be found as a new item. Clean out the original channel with a wire brush or other tool until clean. Use contact cement on the back side of the felt and inside the channel opening. Wrap the felt around a piece of wood or other material that will just fit into the channel. Push it down to make it tight and leave it for several hours to cure. Before removing the board, trim off the excess with a utility knife. Your channel will look like new!
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Upper Window Felt Kit
CHEVROLET 1963-1964 2-DOOR SEDAN UPPER FELT - 4 PIECES
1963-1964 Chevrolet Impala 2 Door Sedan Authentic Upper Felt kit. A 4-piece kit for the upper channels only. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA! Also see F215-2 for belt line felts.
For 1963 1964 Chevrolet Cars
Window Channel Adjusting Plate
Window Channels
CHEVROLET SASH CHANNEL FILLER STRIP-1/32"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-1/16"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-3/64"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1962-1966 TRUCK DOOR WINDOW CHANNEL (NO RIM)
This is Rubber Door Window Channel for 1962-1966 Chevrolet & GMC trucks with NO Metal frame on the glass. Channel runs from top of the vent window across the door window and down the back side. Two pieces needed per truck. "W" Shaped rubber snaps into the window opening for a quick installation.
For 1962 1963 1964 1965 1966 Chevrolet Trucks
CHEVROLET 1964-72 TRUCK VENT POST DIVISION BAR CHANNEL
These are Replacement Vent Window Channels for 1964-1972 Chevrolet & GMC Trucks. The channel is flexible metal with rubber backing and felt lining. Perfect fit to replace the worn out vertical post channels in these trucks. Channels are 5/8" wide x 37" long, sold in a pair for both sides.
For 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
CHEVROLET 1958-1964 HARDTOP DIVISION BAR CHANNELS-2 PCS
This is a pair of 1958-1964 Chevrolet Hardtop Division Bar Channels. Replace those worn out channels to get rid of the window rattle. Complete channel kits are also available. Made in the USA!
For 1958 1959 1960 1961 1962 1963 1964 Chevrolet Cars
CHEVROLET 1964-66PU WINDOW CHANNEL KIT-NO RIM
These window channel kits are complete with everything needed to renew worn out channels for your door windows (vent windows not included). Complete for both sides. See individual items for detailed descriptions. Kit includes: 1 ea. CV-69 division bar replacement felt - FS-154 window channel - 1 set FA-287A belt line felt. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1964 1965 1966 Chevrolet Trucks
CHEVROLET 1961-1964 BEL AIR & BISC. 2DR SEDAN WINDOWFELT
1961-1964 Chevrolet Bel Air & Biscayne 2 Door Sedan Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA! Also see F216-2 or F218-D for Upper Window Channels
For 1961 1962 1963 1964 Chevrolet Cars
CHEVROLET 1961-1964 BELAIR 4DR SEDAN WINDOWFELT - 8 PCS
1961-1964 Chevrolet Bel Air 4 Door Sedan Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA!
For 1961 1962 1963 1964 Chevrolet Cars
CHEVROLET 1963-1964 IMPALA 4DR SEDAN-WAGON WINDOWFELT
1963-1964 Chevrolet Impala 4-Door Sedan & Station Wagon Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA!
For 1963 1964 Chevrolet Cars
CHEVROLET 1961-1964 IMPALA 4DR SEDAN WINDOWFELT - 8 PC
1961-1964 Chevrolet Impala 4 Door Sedan Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA! Also see F218-C for Upper Channels.
For 1961 1962 1963 1964 Chevrolet Cars
CHEVROLET 1963-1964 IMPALA 2DR HT WINDOWFELTS - 8 PCS
1963-1964 Chevrolet Impala 2 Door Hardtop - Sport Coupe Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA!
For 1963 1964 Chevrolet Cars
CHEVROLET 1963-1964 IMPALA CONVERTIBLE WINDOWFELT-8 PC
1963-1964 Chevrolet Impala Convertible Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA!
For 1963 1964 Chevrolet Cars
CHEVROLET 1963-1964 IMPALA 4DR HARDTOP WINDOWFELT-8 PC
1963-1964 Chevrolet Impala 4 Door Hardtop - Sport Sedan Authentic Felt kit. An 8-piece belt line felt kit for inner & outer. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA!
For 1963 1964 Chevrolet Cars
CHEVROLET 1961-1964 4-DOOR SEDAN UPPER FELT - 4 PIECES
1961-1964 Chevrolet Impala 4 Door Sedan Authentic Upper Felt kit. A 4-piece kit for the upper channels only. This set is precision bent with original type materials for those restorers that want the highest quality. Made in the USA! Also see F218-B for belt line felts.
For 1961 1962 1963 1964 Chevrolet Cars
Window Felt Retainer
CHEVROLET GLASS CHANNEL FASTENER (SNAP-IN)
Retain part number C-555 and C-555-3. Fastens to felt by bending tabs on clip. It is then snapped into the existing holes on lower window frame. As required. Some models. See also FS-5654.
For All Chevrolet Cars and Trucks
Window Frames
Window Hardware
CHEVROLET WINDOW REGULATOR ROLLER & RIVET-3/16"
WINDOW REGULATOR ROLLER/RIVET-3/16". This roller & rivet kit has a solid roller wheel - no groove. It is not commonly used in Chevrolet cars or trucks. Please compare with FS-383 or FS-383A before ordering.
For All Chevrolet Cars
CHEVROLET TUBULAR RIVET TOOL
This Rivet Tool is used for tubular type rivets used on vent window assemblies and other applications.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET VENT WINDOW RIVET TOOL KIT W/RIVETS
This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
For All Chevrolet Trucks
Window Regulator Repair Kit
40 Items Found
