37 Items Found
Belt Line Window Felts
CHEVROLET 1937-60 BELTLINE WINDOW FELT-2FT.
2 foot strip. With chrome bead - mohair faced - flexible. Trim length where necessary. Most models.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks
CHEVROLET 1939-60 BELTLINE WINDOW FELT-3 FT.
3 foot strip. With chrome bead - mohair faced - flexible. Trim length where necessary. Most models.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks
Regulators
CHEVROLET 1951-55PU WINDOW REGULATOR - LEFT
This is a Door Window Regulator for 1951-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering. NOTE: This regulator assembly can only be used on original trucks that have a vent window. Replaces GM# 3695521, 3695522
For 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET 1951-55PU WINDOW REGULATOR - RIGHT
This is a Door Window Regulator for 1951-1955 (1st Series) Chevrolet & GMC trucks. Specify Right or Left when ordering. NOTE: This regulator assembly can only be used on original trucks that have a vent window. Replaces GM# 3695521, 3695522
For 1951 1952 1953 1954 1955 Chevrolet Trucks
Sash Channels
CHEVROLET 1928-1960 SIDE WINDOW SASH CHANNEL - 2FT LONG
This Door Window Sash Channel is a nice replacement for the original that may have rusted out. 2-FT. SECTION, .405" (13/32") ID at the narrowest part. This is the piece that holds the glass. You must retain the old brackets to reattach to the new channel.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks
Universal Felt Channel Liner-Wide
CHEVROLET UNIVERSAL FELT CHANNEL LINER-WIDE
This is a Universal Window Channel Liner that is 2-5/8" Wide. Sold by the foot, this felt is used to reline window channels that cannot be found as a new item. Clean out the original channel with a wire brush or other tool until clean. Use contact cement on the back side of the felt and inside the channel opening. Wrap the felt around a piece of wood or other material that will just fit into the channel. Push it down to make it tight and leave it for several hours to cure. Before removing the board, trim off the excess with a utility knife. Your channel will look like new!
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Window Anti Rattle Roller
CHEVROLET 1931-57 ANTI-RATTLE WINDOW ROLLER
This window rubber roller guide is used on many Chevrolet passenger cars from 1931 through 1957. Part of assembly GM# 4091152 Specific Applications: 1931-1933 Cabriolet & Landau Phaeton; 1933 Master Coach, Coupes & 4-Door Sedans; 1935 Master Coach, Coupes, Town Sedan & Sedan Delivery; 1936 Master & Standard Coupes; 1937-1957 Convertibles & Hardtops (1953-1957 Outer) 1955-1956 2-Door Sedan Rear Quarter Window Roller
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
Window Channel Fastener
Window Channel Kit
CHEVROLET 1933-57 PASSENGER WINDOW CHANNEL KIT
This window channel kit fits 1933-1957 Chevrolet Passenger car FRONT door windows (Also fits rear doors on 4-door models with rear vent windows). Kit is for two door windows on all models except hardtop and convertible. . Front door kit includes: 2 each C-367A 5 foot channels - 2 pr. C-555-3 belt line felts - 1 pr. C-516 lower vent post channels - 1 pr. C-347 upper vent post channels. Order beltline retainer screws separately: FS-5654, FS-5655 or FS-5656. THIS ITEM HAS AN $8.00 TUBE CHARGE IN ADDITION TO OVERSIZE SHIPPING CHARGES. Call or email us for a freight quote.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
CHEVROLET 1933-1957 PASS WINDOW CHANNEL KIT - REAR
This window channel kit fits 1933-1957 Chevrolet Passenger car REAR door windows or roll up quarter windows. Kit is for two door windows on all models except hardtop and convertible. NOTE: NOT FOR USE ON REAR DOORS WITH VENT WINDOWS - See K-11. Rear door or roll up quarter window kit includes: 2 each C-367 8 foot channels and 2 pr. C-555-3 belt line felts. Order belt line retainer screws separately: FS-5654, FS-5655 or FS-5656. THIS ITEM HAS AN $8.00 TUBE CHARGE IN ADDITION TO OVERSIZE SHIPPING CHARGES. Call or email us for a freight quote.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
Window Channels
CHEVROLET SASH CHANNEL FILLER STRIP-1/32"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-1/16"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-3/64"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1934-1955 TRUCK DOOR WINDOW CHANNEL - 5FT
This is a 5 Foot Door Window Channel for 1951-1955 (1st Series) Chevrolet & GMC Trucks. Used as a replacement channel for 1932 & earlier Chevrolet passenger cars that originally used rubber window channel. Not an original part for that application, but a great replacement for street rods. This channel has no stainless beaded edge trim.
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
CHEVROLET 1951-55(1ST SER) TRUCK LOWER SASH CHANNEL
This piece fits 1951-1955 (1st Series) Chevy & GMC trucks. It fits at the lower part of the door window that holds the glass and is the guide for the window regulator.
For 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET 1934-1955 TRUCK DOOR WINDOW CHANNEL - 8FT
This is a Felt Lined, Rubberized Metal Backed, Flexible Door Window Channel for 1934-1955 Chevrolet & GMC trucks. Channel comes in an 8 foot length and is 5/8" wide, non-beaded. Specific Applications: 1925-1932 Passenger - Used as a replacement for street rod applications only 1934-46: All Trucks 1947-50: Not Used - See CV-129 1951-1955 (1st Series) Trucks
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
CHEVROLET 1951-55 TRUCK WINDOW CHANNEL KIT
These window channel kits are complete with everything needed to renew worn out channels for your door windows (vent windows not included). Complete for both sides. See individual items for detailed descriptions. Kit includes: 2 ea. CV-69A channel - 1 pr. CV-73 division bar channel 1 pr. CV-287A rubber scrapper - 1 pr. C-555 inner belt line felt. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1951 1952 1953 1954 1955 Chevrolet Trucks
Window Felt Retainer
CHEVROLET GLASS CHANNEL FASTENER (SNAP-IN)
Retain part number C-555 and C-555-3. Fastens to felt by bending tabs on clip. It is then snapped into the existing holes on lower window frame. As required. Some models. See also FS-5654.
For All Chevrolet Cars and Trucks
Window Frames
Window Hardware
CHEVROLET WINDOW REGULATOR ROLLER & RIVET-3/16"
WINDOW REGULATOR ROLLER/RIVET-3/16". This roller & rivet kit has a solid roller wheel - no groove. It is not commonly used in Chevrolet cars or trucks. Please compare with FS-383 or FS-383A before ordering.
For All Chevrolet Cars
CHEVROLET 1937-1960 WINDOW REGULATOR ROLLER & RIVET-1/4"
This is a window regulator roller & rivet for a 1/4" hole. Used on some 1937-1960 Chevrolet & GMC cars & trucks . Compare to original. Two to four required per window regulator. V-groove nylon wheel has an Outside Diameter of 3/4".
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
CHEVROLET 1937-60 WINDOW REGULATOR ROLLER & RIVET 5/16"
This is a window regulator roller & rivet for a 5/16" hole. Used on most 1937-1960 Chevrolet & GMC cars & trucks . Two to four required per window regulator. V-groove nylon wheel has an Outside Diameter of 3/4".
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks
CHEVROLET 1952-59 TRUCK DOOR STRIKER SCREW SET-2 DOORS
This set contains Phillips pan head screws with a star washer below the head. If you require a clutch head screw, please order part #GM-1251, which is sold individually. SET OF 8 SCREWS & 8 STAR WASHERS. SCREWS ARE 1/4'-20 X 3/4" PAN HEAD.
For 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
CHEVROLET 1931-1957 OUTER WINDOW ROLLER GUIDE
This window roller guide is used on many Chevrolet passenger cars from 1931 through 1957. This is a replacement part so it may look different from the original in your car. Bracket height to center of roller 11/16 x 1-1/2" wide. Replaces GM# 4091152 Specific Applications: 1931-1933 Cabriolet & Landau Phaeton; 1933 Master Coach, Coupes & 4-Door Sedans; 1935 Master Coach, Coupes, Town Sedan & Sedan Delivery; 1936 Master & Standard Coupes; 1937-1957 Convertibles & Hardtops (1953-1957 Outer) 1955-1956 2-Door Sedan Rear Quarter Window Roller
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
CHEVROLET 1951-1955 TRUCK VENT WINDOW STRIKER-CHROME
This is a CHROME Vent Window Striker for 1951-1955 (1st Series) Chevrolet & GMC trucks. This part is often rusted and should be replaced when restoring the vent windows in these trucks. Two pieces required per truck. Each striker comes with special size rivets for installation. Part of Assembly with GM# 3695495, 3695496, 3704385, 370438
For 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET TUBULAR RIVET TOOL
This Rivet Tool is used for tubular type rivets used on vent window assemblies and other applications.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET VENT WINDOW RIVET TOOL KIT W/RIVETS
This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
For All Chevrolet Trucks
Window Reset Pad
Window Run Channel
CHEVROLET 1933-60 BEADED WINDOW CHANNEL-5FT.
This is an 5 ft. flexible stainless beaded window channel for sides and top of door windows in 1933-1960 Chevrolet passenger cars. Dimensions - 5/8 wide x 9/16 overall height. Exact replacement. Most closed models. Replaces GM# 4045914 THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO OVERSIZED SHIPPING.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
CHEVROLET 1933-1960 BEADED WINDOW CHANNEL-8FT.
This is an 8 ft. flexible stainless beaded window channel for sides and top of door windows in 1933-1960 Chevrolet passenger cars. Dimensions - 5/8 wide x 9/16 overall height. Exact replacement. Most closed models. Replaces GM# 4075477 THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO OVERSIZED SHIPPING.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
Window Run Ridge Channel
CHEVROLET 1933-60 LOWER VENT POST CHANNEL
This is the Lower Vent Window Post Channel for 1933-1960 Chevrolet Passenger Cars. This channel has no beading because it is down inside the door and is not seen. The channel is 1/2" deep x 1/2" wide x 15" long. It is designed to drop into the original vent window post and be riveted or glued in place. NOTE: 1940 Models may have a narrow channel that will not accept this replacement piece. If so, contact us and we can send CV-73, which is slightly narrower.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
CHEVROLET 1933-1960 VENT UPPER DIVISION BAR CHANNEL
UPPER Vent Window Division Bar Channel for 1933-1960 Chevrolet passenger cars. Stainless beaded edge - mohair-lined. Exact replacement for rear side UPPER section of the vent window division bar. Fastens in place by small screws or rivets - top and bottom. Must be cut to length.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars
37 Items Found
