20 Items Found
Belt Line Window Felts
CHEVROLET 1960-1963 TRUCK BELTLINE WINDOW FELT
The belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
For 1960 1961 1962 1963 Chevrolet Trucks
Regulators
CHEVROLET 1960-63PU WINDOW REGULATOR - LEFT
This is a door window regulator for 1960-1963 Chevrolet & GMC trucks. Specify Right or Left when ordering. Replaces GM# 3757829, 3757830
For 1960 1961 1962 1963 Chevrolet Trucks
CHEVROLET 1960-63PU WINDOW REGULATOR - RIGHT
This is a door window regulator for 1960-1963 Chevrolet & GMC trucks. Specify Right or Left when ordering. Replaces GM# 3757829, 3757830
For 1960 1961 1962 1963 Chevrolet Trucks
Sash Channels
CHEVROLET 1928-1960 SIDE WINDOW SASH CHANNEL - 2FT LONG
This Door Window Sash Channel is a nice replacement for the original that may have rusted out. 2-FT. SECTION, .405" (13/32") ID at the narrowest part. This is the piece that holds the glass. You must retain the old brackets to reattach to the new channel.
For 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks
Universal Felt Channel Liner-Wide
CHEVROLET UNIVERSAL FELT CHANNEL LINER-WIDE
This is a Universal Window Channel Liner that is 2-5/8" Wide. Sold by the foot, this felt is used to reline window channels that cannot be found as a new item. Clean out the original channel with a wire brush or other tool until clean. Use contact cement on the back side of the felt and inside the channel opening. Wrap the felt around a piece of wood or other material that will just fit into the channel. Push it down to make it tight and leave it for several hours to cure. Before removing the board, trim off the excess with a utility knife. Your channel will look like new! NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Window Channels
CHEVROLET SASH CHANNEL FILLER STRIP-1/32"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-1/16"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET SASH CHANNEL FILLER STRIP-3/64"
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
For 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET 1955-1962 TRUCK DOOR WINDOW CHANNEL - 5FT.
This is flexible Door Window Channel for 1955-1962 Chevrolet & GMC trucks. Section is 5 feet long. Corrugated steel - cloth covered and mohair lined. See manufacturer's installation video: Click here to view This part is oversize and special freight charges will apply. Call or email us for a freight quote. Specific Applications: 1955 - 1959 Chevrolet - Truck 1955 - 1955 GMC - 100 1955 - 1959 GMC - 150 1955 - 1959 GMC - 250 1955 - 1959 GMC - 300 1955 - 1959 GMC - 350-8 1955 - 1959 GMC - 370 1959 - 1959 Chevrolet - 3B 1959 - 1959 Chevrolet - 3C 1959 - 1959 Chevrolet - 3D 1959 - 1959 Chevrolet - 3E 1959 - 1959 Chevrolet - 3F 1959 - 1959 Chevrolet - 3G 1960 - 1963 Chevrolet - C10 Panel 1960 - 1963 Chevrolet - C10 Pickup 1960 - 1963 Chevrolet - C10 Suburban 1960 - 1963 Chevrolet - C20 Pickup 1960 - 1963 Chevrolet - C20 Suburban 1960 - 1963 Chevrolet - C30 Panel 1960 - 1963 Chevrolet - C30 Pickup 1960 - 1963 Chevrolet - C40 1960 - 1963 Chevrolet - K10 Pickup 1960 - 1963 Chevrolet - K10 Suburban 1960 - 1963 Chevrolet - K20 Pickup 1960 - 1963 Chevrolet - K20 Suburban 1960 - 1963 Chevrolet - Suburban 1960 - 1963 GMC - 1000 Series 1960 - 1963 GMC - 1500 Series 1960 - 1963 GMC - 2500 Series 1960 - 1963 GMC - 3000 1960 - 1963 GMC - 3500 1960 - 1963 GMC - Suburban
For 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Trucks
CHEVROLET 1960-1963 TRUCK DOOR WINDOW CHANNEL - 5FT
This is a Door Window Channel for 1960-1963 Chevrolet & GMC Trucks that Do NOT have metal trim on the door glass. Sold in a 5 foot channel for one window. Two required per truck.
For 1960 1961 1962 1963 Chevrolet Trucks
CHEVROLET 1960-63PU WINDOW CHANNEL KIT-W/RIM
1960-1963 Truck Window Channel Kit for These window channel kits are complete with everything needed to renew worn out channels for your door windows (vent windows not included). Complete for both sides. See individual items for detailed descriptions. Kit includes: 7 ft. FS-92 felt - 1 set FS-69 belt line felt - 2 ea. CV-375 channels This part is oversize and special freight charges will apply. Call or email us for a freight quote.
For 1960 1961 1962 1963 Chevrolet Trucks
Window Felt Retainer
CHEVROLET GLASS CHANNEL FASTENER (SNAP-IN)
Retain part number C-555 and C-555-3. Fastens to felt by bending tabs on clip. It is then snapped into the existing holes on lower window frame. As required. Some models. See also FS-5654.
For All Chevrolet Cars and Trucks
Window Frames
Window Hardware
CHEVROLET 1937-60 WINDOW REGULATOR ROLLER & RIVET 5/16"
This is a window regulator roller & rivet for a 5/16" hole. Used on most 1937-1960 Chevrolet & GMC cars & trucks . Two to four required per window regulator. V-groove nylon wheel has an Outside Diameter of 3/4".
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars and Trucks
CHEVROLET TUBULAR RIVET TOOL
This Rivet Tool is used for tubular type rivets used on vent window assemblies and other applications.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET VENT WINDOW RIVET TOOL KIT W/RIVETS
This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
For All Chevrolet Trucks
Window Regulator Repair Kit
20 Items Found
