The belt line felts are sold in complete sets only (four pieces per set) and have clips attached to the felt strips as original for a clean installation.
This is a Universal Window Channel Liner that is 2-5/8" Wide. Sold by the foot, this felt is used to reline window channels that cannot be found as a new item. Clean out the original channel with a wire brush or other tool until clean. Use contact cement on the back side of the felt and inside the channel opening. Wrap the felt around a piece of wood or other material that will just fit into the channel. Push it down to make it tight and leave it for several hours to cure. Before removing the board, trim off the excess with a utility knife. Your channel will look like new! NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. This item is not returnable.
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
This buytl rubber material is used to set glass into metal sash channels and window frames for all Chevrolet cars & Chevy & GMC trucks. It is available in three different thicknesses and you must check to see the thickness required for your glass. Keep in mind that a rusted lower sash piece can be weak and allow the sides of the sash to widen out and cause a loose fit. Check fit before ordering. Some people order the two closest sizes to be sure. SPECIFY SIZE WHEN ORDERING - CV-294A is 1/32" thick or .03125"; CV-294C is 3/64" thick or .0468"; CV-294B is 1/16" thick or .0625". Sold by the foot. All of these are 1-1/2" wide. This item is not returnable.
This is Rubber Door Window Channel for 1962-1966 Chevrolet & GMC trucks with NO Metal frame on the glass. Channel runs from top of the vent window across the door window and down the back side. Two pieces needed per truck. "W" Shaped rubber snaps into the window opening for a quick installation.
These are Replacement Vent Window Channels for 1964-1972 Chevrolet & GMC Trucks. The channel is flexible metal with rubber backing and felt lining. Perfect fit to replace the worn out vertical post channels in these trucks. Channels are 5/8" wide x 37" long, sold in a pair for both sides.
For 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
These window channel kits are complete with everything needed to renew worn out channels for your door windows (vent windows not included). Complete for both sides. See individual items for detailed descriptions. Kit includes: 1 ea. CV-69 division bar replacement felt - FS-154 window channel - 1 set FA-287A 4 piece belt line felt. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
Retain part number C-555 and C-555-3. Fastens to felt by bending tabs on clip. It is then snapped into the existing holes on lower window frame. As required. Some models. See also FS-5654.
This vent post rivet kit comes with a riveting tool and 26 rivets. Rivets included: 8 ea. 7/32 x 9/64 OD; 16 ea. 1/4" x 9/64 OD, 2 ea. Vent Pivot Shouldered Rivets. One kit does both sides.
