This universal wiper arm is polished stainless steel with an adjustable range of 6" to 8" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
This universal wiper arm is polished stainless steel with an adjustable range of 8" to 12" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
This wiper arm fits all 1932-1934 Chevrolet passenger cars and 1931-1938 Chevrolet & GMC trucks. Overall Length of this arm is 7-3/4". Replaces GM# 603047
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a Windshield Wiper Arm for 1935-1936 Chevrolet Passenger cars. Arm is stainless steel and comes with tensioning cap. Overall length of arm is 6 inches. Replaces GM# 378506 Specific Applications: 1935 Master Passenger Cars: 1936 All Passenger Cars
This windshield wiper blade is the original flat style blade used from 1925-1937 on Chevrolet & GMC car & trucks. Blade is 8 inches long and has a flat clip on the top designed to fit into the slotted opening on the wiper arm. Replaces GM# 985459
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
This is a pair of Windshield Wiper Transmission Mounting Gaskets for 1935 Master & all 1936 Chevrolet passenger cars. One pair required per car. This rubber gasket prevents water from entering around the wiper transmissions in the cowl. If you are changing the wiper transmissions, be sure to include a set of new gaskets for a proper installation. Inside Dimensions: 15/32" x 1-21/32". Replaces GM# 4065094
Our modern vehicles have spoiled us to rely on the safety of intermittent wipers. Now you can have this "modern" convenience in your vintage car or truck. This switch is designed to work on all Newport Engineering wiper motors to make your old car as safe as your modern car. NOTE: Will NOT Work on stock electric wiper motors!
These wiper savers are a chrome bullet that fits over the wiper transmission splines for displaying at car shows. Sold in pairs, they have a set screw to hold them in place. Approximate Height 1.5"
This is a pair of Wiper Savers - Custom Chrome Caps for any vehicle. Made specifically to remove windshield wiper arms & blades for car shows. Super nice chrome plating. Made in the USA!
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
THE SHAFT IS 5" LONG AND INCLUDES INSTRUCTIONS FOR SHORTENING THE SHAFT. THIS WIPER MOTOR HAS AN AUTOMATIC SELF PARK AND A 110 DEGREE SWEEP. USE WITH WIPER ARMS VT-60, VT-61, VT-64, OR VT-65 AND WIPER BLADES VT-62, VT-63, VT-66, AF-341SR, OR VT-67.
This is a universal 6-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH. The shaft is 3-1/4" long and the kit includes instructions for shortening the shaft down to 2-1/2" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. Mounting holes are 3-5/8" on center. Machined to accept AF-320 and AF-345 Wiper Arms for stock applications. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 12-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH. The shaft is 3-1/4" long and the kit includes instructions for shortening the shaft down to 2-1/2" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. Mounting holes are 3-5/8" on center. Machined to accept AF-320 and AF-345 Wiper Arms for stock applications. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. The kit comes with an adjustable length SLOTTED Adjustable Wiper Arm that is 7-1/4" to 8-1/2" long from the pivot attachment. Slot Style Wiper blade included in the kit is 8" long. The shaft is 2.5" long. The wiper motor has an automatic self-parking feature and a 110 degree sweep. For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade. For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4". NOTE: This motor kit will not work with early 1925-1932 Chevy cars with crank up windshields.
This is a Universal 12-Volt Wiper Motor with Stainless Housing. Motor comes with wiper arm and blade. The shaft is 5" long and includes instructions for shortening the shaft. This wiper motor has an automatic self park and a 110 degree sweep. Motor overall depth is 3-1/4". For replacement wiper arms see VT-60, VT-61, VT-64 or VT-65. Replacement wiper blades see VT-62, VT-63, VT-66, AF-341SR or VT-67. NOTE: WILL NOT WORK ON EARLY GM VEHICLES WITH CRANK-UP WINDSHIELDS.
Fits 1935 Master Passenger cars & All 1936 Passenger cars. This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch NOTE: Will not work with Factory Radio.
