This is a 1950's Pontiac RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. The lens has 41 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed for 12-VDC systems. It has a chrome plated bezel and mounts to a flat surface. Dimensions: Lens OD 3-5/16", Bezel OD 4-5/16". Flush Mount.
This is a 1938-1939 Ford Teardrop RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. It comes with a #1157 plug adapter. The lens has 39 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. It has a die cast chrome plated bezel and mounts to a flat surface with 2 small studs.
This is a complete BLACK LED tail light assembly for 1955-1959 Chevrolet & GMC trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs. Replaces GM# 898199, 899914
This is a Ford Teardrop Tail Light Assembly with LED card installed behind the red glass lens. The housing is powder coated Black for rust protection. Light is 12-volt and comes with 28 Super Bright LED's.
This is a complete STAINLESS LED tail light assembly for 1954-1959 Chevrolet & GMC trucks. Fits Left or Right. Correct for 1955-1959 but will fit 1954-1955 (1st Series). This light has 29 Super Bright LEDs. Replaces GM# 898199, 899914
This is a complete BLACK SEQUENTIAL LED tail light assembly for 1955-1959 Chevrolet & GMC Stepside trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs and includes a selector switch to control sequential function off, direction left or direction right. This assembly also features a brake attention option with a sequential-once function. Replaces GM# 898199, 899914 Note: Can be used on 1954-1955 (1st Series) Stepside trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a complete STAINLESS STEEL SEQUENTIAL LED tail light assembly for 1955-1959 Chevrolet & GMC Stepside trucks. In 1955, used on 2nd Series only. This light has 29 Super Bright LEDs and includes a selector switch to control sequential function off, direction left or direction right. This assembly also features a brake attention option with a sequential-once function. Replaces GM# 898199, 899914 Note: Can be used on 1954-1955 (1st Series) Stepside trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This is a 12 Volt red 5-LED reflector for the tail light on 1951-1952 & 1956 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). Two required per vehicle. Reflector comes with a threaded stud on the back for mounting and a two wire hook up. Dimensions: OD =1-7/16" (1.445î/36.7 mm). Replaces GM# 5943455
This is a Ford Teardrop Tail Light Assembly with red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
This is a 12-Volt replacement LED tail light lens for 1954-1959 Chevrolet & GMC Stepside Trucks. Simple to install, this lens has a plug & play end that mounts directly to your original tail light socket for the original #1157 bulb. The lens has 29 Super Bright Red LED's that are fully sealed, epoxy coated electronics. Lens is 3-1/2" outside diameter. Replaces GM# 5938745, 5947580 Note: Use as a replacement on 1954-1955 (1st Series) trucks.
For 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
This plastic outer red LED tail light lens fits all 1956 Chevrolet passenger cars. The 12-volt LED lens has 40 Super Bright Red LEDs. The lens is epoxy coated, fully sealed electronics. Solid State Circuit Boards are designed for 7.7 to 14.0 volts DC. Two required per car. Replaces GM# 5947161
This is a Ford Teardrop Tail Light Assembly with Blue Dot installed in the red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
This SEQUENTIAL LED tail light lens fits 1955-1959 (2nd Series) Chevrolet and GMC Stepside trucks. This 12 volt lens assembly includes 29 super bright red led bulbs on a fully sealed, epoxy coated solid state circuit board. This lens comes complete with a double connector with offset pins to plug into your existing tail light socket. Requires use of turn signal flasher FS-250A, sold separately.
This is a 12 Volt LED Lens for 1938-1939 Ford tail lights. Features: *New lens design is same size and shape as original Ford lens. *Super bright LED with high quality injection molded polycarbonate lens. *Dual function with tail light and bright stop/turn signal. *Lens fits all original & reproduction 1938-39 Ford tail lights. *Easy electrical connection with 1157 plug, no modification to vehicle. *Fits L/H or R/H side.
This is an oval shaped RED Light that can be used for Stop, Turn Signal or Clearance Light applications. It comes with a 3-prong female plug adapter. The lens has 40 RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. Dimensions: 3-11/16" x 7-7/8"
This is a complete STAINLESS tail light assembly for 1955-1959 Chevrolet & GMC trucks. In 1955, used on 2nd Series only. Fits left or right side. Replaces GM# 898199, 899914
These new reproduction tail light assemblies fit all 1955-1959 Chevrolet & GMC panel trucks & Suburbans. They come complete with chrome housings, light sockets, 12 volt bulbs and lens gaskets. Sold in pairs. Replaces GM#'s 897821, 879822, 898669, 898670.
This is a Chrome Plated Set of Tail Light Assemblies for 1956 Chevrolet passenger cars. The chrome plating is the highest quality and these are Made in the USA! You won't be disappointed!
This chrome tail light rim (bezel) fits 1947-1956 Chevrolet & GMC Panel Truck & Suburbans for the light on the rear cargo door. Dimensions: 3-3/16" x 4-9/16". Replaces GM# 5941114
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks
This is a BLACK LEFT Tail Light Mounting Bracket Arm for 1955-1966 Chevrolet & GMC Stepside pickups. In 1955, used on 2nd Series Only. Replaces GM# 3716708, 3724001
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a BLACK RIGHT Tail Light Mounting Bracket Arm for 1955-1966 Chevrolet & GMC Stepside pickups. In 1955, used on 2nd Series Only. Replaces GM# 3724002
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a CHROME LEFT Tail Light Mounting Bracket Arm for 1955-1966 Chevrolet & GMC Stepside pickups. In 1955, used on 2nd Series Only. Replaces GM# 3716708, 3724001
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a CHROME RIGHT Tail Light Mounting Bracket Arm for 1955-1966 Chevrolet & GMC Stepside pickups. In 1955, used on 2nd Series Only. Replaces GM# 3724002
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This is a tail light lens gasket for Chevrolet & GMC panel trucks & Suburbans (with doors) for the single light mounted on the left rear door. Dimensions: 3-1/8" x 4-7/16" OL. Replaces GM# 5936907
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks
This gasket is used to mount the tail light assembly to the body on all 1955-1958 Chevrolet Cameo pickups & GMC Suburban pickups. 2 required per vehicle.
Upon applying the brakes, this electronic device rapidly flashes the brake lights for a second or two to gain the attention of the driver behind you. Works on taillights or 3rd brake light. Easy hookup instructions included.
This is a red reflector for the tail light on 1951-1952 & 1956 Chevrolet passenger cars (exc Sedan Delivery or Station Wagon). Two required per vehicle. Reflector comes with a threaded stud on the back for mounting. Dimensions: OD =1-7/16" (1.445î/36.7 mm). Replaces GM# 5943455
This is a replacement red plastic tail light lens for 1954-1959 Chevrolet & GMC Stepside Trucks. The lens is 3-1/2 diameter. Replaces GM# 5938745, 5947580 Note: Use as a replacement on 1954-1955 (1st Series).
This plastic outer red tail light lens fits all 1956 Chevrolet passenger cars. It has the Guide script molded into it. Two required per car. Replaces GM# 5947161
This is a replacement red plastic tail light lens with BLUE DOT for 1954-1959 Chevrolet & GMC Stepside Trucks. The lens is 3-1/2 diameter. Replaces GM# 5938745, 5947580 Note: Use as a replacement on 1954-1955 (1st Series).
This plastic tail light lens is for 1947-1956 Chevrolet & GMC Panel Truck & Suburban models with light on rear cargo door. Dimensions: 2-7/8" x 4-1/4". Made in the USA! Replaces GM# 5936906
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks
This glass tail light lens is for 1947-1956 Chevrolet & GMC Panel Truck & Suburban models with light on rear cargo door. Dimensions: 2-7/8" x 4-1/4". Replaces GM# 5936906
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks
This plastic outer red tail light lens fits all 1956 Chevrolet passenger cars. It has a chrome Chevy BOWTIE molded into it for a custom look. Sold in a pair for both sides. Made in the USA! Replaces GM# 5947161
This plastic outer CLEAR tail light lens fits all 1956 Chevrolet passenger cars. It has a Chevy BOWTIE molded into it for a custom look. Sold in a pair for both sides. Made in the USA! Replaces GM# 5947161
This plastic outer RED tail light lens fits all 1956 Chevrolet passenger cars. It has a BLUE Chevy BOWTIE molded into it for a custom look. Sold in a pair for both sides. Made in the USA! Replaces GM# 5947161
