LED Tail Light Assemblies
This is a Ford Teardrop Tail Light Assembly with LED card installed behind the red glass lens. The housing is powder coated Black for rust protection. Light is 12-volt and comes with 28 Super Bright LED's.
For All Chevrolet Cars and Trucks
This is a 1938-1939 Ford Teardrop RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. It comes with a #1157 plug adapter. The lens has 39 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. It has a die cast chrome plated bezel and mounts to a flat surface with 2 small studs.
For All Chevrolet Cars and Trucks
12 Volt. Stainless Steel Bezel. EPOXY COATED, FULLY SEALED ELECTRONICS.
For All Chevrolet Cars and Trucks
This is a 1950's Pontiac RED LED Tail Light that can be used for Hot Rod Stop & Turn Signal Light applications. The lens has 41 Super Bright RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed for 12-VDC systems. It has a chrome plated bezel and mounts to a flat surface. Dimensions: Lens OD 3-5/16", Bezel OD 4-5/16". Flush Mount.
For All Pontiac Cars and Trucks
LED Tail Light Conversions
This is a 6-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! 6-Volt version has 60 Super Bright RED LEDs, plus two White LEDs for the license light. Bolts into original or our reproduction tail light housings. Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 60 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens & hooking up the wires! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. These will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This is a 12-VOLT LED tail light conversion for 1931-1932 Chevrolet passenger cars & 1931-1939 Chevy & GMC trucks. These amazing conversions will make your old Chevy really visible from the rear! Safety is a major concern when driving our old cars on today's highways. LED lighting has become the standard of the automotive industry and for good reason - it's easy to see! These newly designed LED conversions have 56 super bright LED lights installed on a custom fit card specifically made for these cars & trucks. No special bracketing required. Can be installed as fast as changing a tail light lens! Available in both 6-volt or 12-volt, this is a safety item you can't afford to be without! Whether you have a totally original 6-cylinder with a 6-volt system or a monster V-8 running a 12-volt system, these are a must-have addition to your vintage car or truck. They will work with turn signal, tail light and stop light circuits. NOTE: Will not work with Blue Dot Lenses. Another quality part for your vintage Chevrolet from The Filling Station! Wiring Key: Black = Ground Blue = Stop Light Yellow = Tail Light
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
LED Tail Light Lenses
This is a Ford Teardrop Tail Light Assembly with red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
For All Chevrolet Cars and Trucks
This is a Ford Teardrop Tail Light Assembly with Blue Dot installed in the red glass lens. The housing is powder coated Black for rust protection. Light comes with a 12-volt #1157 bulb installed.
For All Chevrolet Cars and Trucks
LED Tail Light Plastic Lens with "CHEVROLET" script for all 1933-1936 Chevrolet passenger cars. Dimensions: 4-3/8" Tall x 2-7/8" Wide. Replaces GM# 915402 Specific Applications: 1933-1936 Passenger - Fits Left or Right 30 Super Bright Red LEDs with Red Lens Easily Installs in Your Original Housing with 1156 Plugs Epoxy Coated, Fully Sealed Electronics Solid State Circuit Boards are Designed for 7.7-14.0 VDC Licensed by General Motors
For 1933 1934 1935 1936 Chevrolet Cars
This is a 12 Volt LED Lens for 1938-1939 Ford tail lights. Features: *New lens design is same size and shape as original Ford lens. *Super bright LED with high quality injection molded polycarbonate lens. *Dual function with tail light and bright stop/turn signal. *Lens fits all original & reproduction 1938-39 Ford tail lights. *Easy electrical connection with 1157 plug, no modification to vehicle. *Fits L/H or R/H side.
For All Chevrolet Cars and Trucks
Tail Light Arm
This is the left side tail light arm (fender mount) for 1933-1935 Chevrolet passenger cars. This arm can be used on the right side by cutting off the license plate tab that sticks up. NOTE: If this arm is used on the right side, the angle of the arm may need to be modified. Replaces GM# 370901. Specific Applications: 1933-1934 Passenger cars with fender mounted tail lights 1935 Standard Passenger cars with fender mounted tail lights.
For 1933 1934 1935 Chevrolet Cars
Tail Light Assemblies
This is an oval shaped RED Light that can be used for Stop, Turn Signal or Clearance Light applications. It comes with a 3-prong female plug adapter. The lens has 40 RED LEDs and is epoxy coated with fully sealed electronics. It has a solid state circuit board that is designed at 7.7 - 14.0 VDC. Dimensions: 3-11/16" x 7-7/8"
For All Chevrolet Cars and Trucks
Tail Light Bezels
1933-36 TAIL LIGHT RIM - CHROME
For 1933 1934 1935 1936 Chevrolet Cars
Tail Light Brackets
This is the reinforcing plate for fender mounted tail light arms for 1933-1935 Chevrolet passenger cars. Replaces GM# 371196 Specific Applications: 1933-1934 Passenger cars with fender mounted tail lights 1935 Standard Passenger cars with fender mounted tail lights.
For 1933 1934 1935 1936 Chevrolet Cars
Tail Light Gaskets
This tail light lens gasket fits all 1931-1932 Chevrolet passenger cars and 1931-1939 Chevy & GMC trucks. Gasket is made in a cork & rubber composite and die cut. Made in the USA! Replaces GM# 913824.
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
This tail light lens gasket fits all 1933-1936 Chevrolet passenger cars. Gasket is made with a cork & rubber composite and die cut.
For 1933 1934 1935 1936 Chevrolet Cars
Tail Light Hardware
These are the tail light to bezel screws for 1926-1939 Chevrolet & GMC cars & trucks. Sold in a pair for one light. Stainless steel, countersunk slotted oval head 8-32 x 3/4".
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
Upon applying the brakes, this electronic device rapidly flashes the brake lights for a second or two to gain the attention of the driver behind you. Works on taillights or 3rd brake light. Easy hookup instructions included.
For 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 Chevrolet Cars
Tail Light Lenses
This is a Glass Bule Dot Lens Kit with Chrome Bezels. Requires drilling a hole in your tail light lens to install.
For All Chevrolet Cars and Trucks
This is a Glass tail light lens for 1933-1936 Chevrolet passenger cars. It has the original “CHEVROLET” script molded into the lens. The lettering is painted white as original. Dimensions: 4-3/8" Tall x 2-7/8" Wide. Replaces GM# 915402
For 1933 1934 1935 1936 Chevrolet Cars
Glass with bluedot
For 1933 1934 1935 1936 Chevrolet Cars
This is a reproduction of the proper plastic tail light lens for 1931-1932 Chevrolet cars & 1931-1935 Chevrolet trucks (will fit 1931-1939 trucks). We made this lens from all new tooling. It is a faithful copy of an NOS original lens. Beautiful, clear details make this lens a true show quality piece. Comes with Chevrolet script Bowtie and it is licensed by GM. Use with our LED conversions for super bright visibility. Replaces GM# 913823
For 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks