Window Channels
CHEVROLET UNIVERSAL FELT CHANNEL LINER
This is a Universal Window Channel Liner that is 1-5/8" Wide. Sold by the foot, this felt is used to reline window channels that cannot be found as a new item. Clean out the original channel with a wire brush or other tool until clean. Use contact cement on the back side of the felt and inside the channel opening. Wrap the felt around a piece of wood or other material that will just fit into the channel. Push it down to make it tight and leave it for several hours to cure. Before removing the board, trim off the excess with a utility knife. Your channel will look like new! NOTE: This item is sold by the foot. Items that are cut to order are NOT RETURNABLE. Please insure this item is what you need BEFORE ordering.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET GLUED BACK FELT CHANNEL LINER 9/16"-33" STRIPS
This Universal Window Channel Felt Liner is used to re-line 9/16" Door Window Channel in early cars & trucks that have a metal rim on the glass. Chevrolet hardtop and convertible models as well as Chevy & GMC trucks would use this felt to repair original rigid metal vent window post channels when the felt is worn out or missing. These pieces are 33 inches long and 1-3/4 inches wide to be used on 9/16" wide channel. The strips have a glued back with peel-off strips for easy installation. Two strips to a package.
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks
CHEVROLET 1942-66PU REAR SMALL WINDOW SEAL - ALL BLACK
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a black rubber locking strip. Length is 92 inches and it will seal either one back window or two corner windows on custom cabs. Replaces GM# 3847414, 3847415 NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
CHEVROLET 1942-66 PU REAR SMALL WINDOW SEAL - W/CHROME
This seal is sold in a straight section to seal the small rear window on 1942-1966 Chevrolet and GMC trucks. This two piece set comes with a CHROME locking strip. Length is 92 inches and it will seal one small back window. Replaces GM# 3847414, 3847415 NOTE: 1942 trucks had an early style rear window with a die cast retainer. This series truck requires a different rubber seal. For this style, see our part number 60-496.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Window Hardware
Window Seal Installation Tool
CHEVROLET LOCKING STRIP INSTALLATION TOOL-MULTI HEAD
This Lock Strip Installation Tool is specifically designed for self-locking two-piece rubber window seals. The eye of the tool threads locking strip into the groove and inserts it into the channel. Multiple head sizes for different sized lock strips.
Tool makes installing the lock strip into the main rubber seal much easier as it will spread the main rubber while being pulled through the groove.
For 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
CHEVROLET WINDOW SEAL TOOL
A quality hand tool designed for installing rubber seals! Brings window seal lip over the sharp metal edges without puncturing or tearing the seal. This multi-tool also works excellent for burnishing or accessing hard to reach places like latch mechanisms or any other mechanical tight spots
For All Chevrolet Cars and Trucks
Window Seals
CHEVROLET 1947-1955 TRUCK LOWER WINDOW SCRAPERS
These Lower Outer Window Seals fit on the outer edge of 1947-1955 1st Series Chevrolet and GMC Pickups. These 27" seals are the correct length for 1947-1950 models without wing windows, for models with wing windows these seals must be cut to length. One pair required per truck. They are held in place, down inside the door in a crimp channel. Replaces GM 3847608
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
