FAX: (541) 258-6968
 
7 Items Found
King Pin Set
Chevrolet Parts -  1941-1955 1/2 TON TRUCK KING PIN SET - STD
FS-128
USD $69.50 SET
CHEVROLET 1941-1955 1/2 TON TRUCK KING PIN SET - STD
This king pin set fits all 1941-1955 (1st Series) Chevrolet & GMC trucks. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are .866" x 5.31". Bushing OD 1.055". This king pin set has floating bushings that are pre-machined to fit the pin without reaming. Replaces GM# 605121 Specific Applications: 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks; 1941-1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks Also available is an oversize king bolt set for axles with excessive wear in the axle bore. See FS-128-10 for .010" OVERSIZE KING PIN SET

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks


Chevrolet Parts -  1939-1954 PASSENGER CAR KING PIN SET
FS-102
USD $89.95 SET
CHEVROLET 1939-1954 PASSENGER CAR KING PIN SET
This king pin set fits 1939-1954 Chevrolet passenger cars with independent open knee suspension. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. King pin dimensions are: .866" x 5.31". Bushing OD: 1.0530"; Bushing ID: .8665"; Bushing Height: 1.31". Note: This king pin set has floating bushings and are NOT a press fit type. They do not require reaming. Replaces GM# 603386, 599207

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars


Chevrolet Parts -  1931-52 UTILITY KING PIN SET
FS-111
USD $109.95 SET
CHEVROLET 1931-52 UTILITY KING PIN SET
1931-1952 Chevrolet & GMC Utility Truck King Pin Set. Set is complete for both sides. Includes all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are: .921 X 5.18". NOTE: The bushings for this king pin set must be pressed into the spindle and reamed to fit the king pin. Bushing OD is 1.048". Replaces GM# 601019 Specific Applications: 1931-1942: 1-1/2 Ton Utility (exc COE, MT, MY) 1946-1950:3/4, 1, 1-1/2 ton (exc (D-D) Double Duty and (SBC) School Bus Chassis) 1951-1952: 3/4, 1 ton (exc (D-D) Double Duty)

For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Trucks


Chevrolet Parts -  1946-1963 UTILITY TRUCK KING PIN SET
ML-24
USD $109.95 KIT
CHEVROLET 1946-1963 UTILITY TRUCK KING PIN SET
This king pin set fits Chevrolet & GMC heavy trucks. Dimensions: 1.109" x 6-3/8". Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. NOTE: The bushings in this kit are press fit and must be reamed to fit the king pin. The reamer used must be long enough to ream both bushings at the same time in order to maintain alignment. Replaces GM# 3691111 Specific Applications: 1946-1955(1st Series) 2 Ton & Cab-Over Engine (COE); 1948-1955(1st Series) 1-1/2 Ton w/H.D.; 1946-1963 UJ, UK, VJ, VK, SBC, D-D (exc. 102" WB)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 Chevrolet Trucks


Chevrolet Parts -  1941-55 1/2 TON TRUCK KING PIN SET - .010" OS
FS-128-10
USD $119.95 SET
CHEVROLET 1941-55 1/2 TON TRUCK KING PIN SET - .010" OS
OVERSIZE KING PIN SET - DO NOT USE FOR STANDARD INSTALLATIONS - SEE FS-128 This king pin set fits all 1941-1955 (1st Series) Chevrolet & GMC trucks. This set is .010" OVERSIZE - to be used in vehicles where the axle opening is larger than original and a standard king pin would not be tight. Sets are complete for both sides. They include all necessary parts to renew the king bolts - bushings and bearings. See grease fitting listings to replace old fittings. King pin dimensions are (.876" x 5.31"). Replaces GM# 609882 Specific Applications: 1941-1942 Chevrolet & GMC 3/4 & 1 Ton Trucks; 1941-1955 (1st Series) Chevrolet & GMC 1/2 Ton Trucks

For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks

Spindle Nut
Chevrolet Parts -  1935-1972 STEERING SPINDLE NUT 3/4-20
AF-61
USD $2.95 EA
CHEVROLET 1935-1972 STEERING SPINDLE NUT 3/4-20
Steering knuckle or spindle nut for 1935-1972 Chevrolet & GMC cars & trucks. Thread Size: 3/4"-20 X 7/16" Tall. Replaces GM# 378137 Specific Applications: 1935-1940 Master Passenger; 1941-1964 Passenger; 1946-1972 Pickup

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Cars and Trucks

Spindle Washer
Chevrolet Parts -  1916-1961 BEARING RETAINER SPINDLE WASHER
CV-195
USD $3.75 EA
CHEVROLET 1916-1961 BEARING RETAINER SPINDLE WASHER
This is a replacement Steering Knuckle or Spindle Washer for 1916-1961 Chevrolet & GMC cars & trucks. Dimensions: ID 25/32" x OD 1-9/16" x 1/8" Thick. Replaces GM# 326196, 3663991 Specific Applications: 1916-1934 All (exc 1933-1934 Std - CC, DC); 1935-1942 All (exc 1935-1936 Std - EC, FC or Utility); 1946-1954 Passenger & 1/2 Ton; 1955-1961 1/2 Ton (exc 4WD); 1958-1960 Passenger

For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars and Trucks

7 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com