FAX: (541) 258-6968v
 
New CustomersLogin
  1. The Filling Station »
  2. 1954 Chevrolet Truck Parts »
  3. Steering »
  4. Tie Rods »
Filters
Vehicle: Truck - Switch To Car / All
Year: 1954 - Clear Filter

Ball Studs
Chevrolet Parts - 1927-59 TIE ROD-DRAG LINK BALL STUD - THREADED
SA-157T
USD $21.95 EA
Buy 2+: $19.95
CHEVROLET 1927-59 TIE ROD-DRAG LINK BALL STUD - THREADED
These studs fit 1927-1959 Chevrolet & GMC cars & trucks. They are threaded replacements for the stud that the tie rod ends & drag link ends mount onto. To install a new ball, use a 1/2" drill bit and drill the bottom of the shank down about 1/8. Press out the ball in a hydraulic press. Press in the new ball stud. CAUTION: Be sure the new ball is fully seated in the arm and down tight (clamp in place if necessary). Dimensions: 1" Diameter Ball with .532" Diameter Stud Specific Applications: 1927-1959 Passenger & 1/2 Ton Truck - TIE ROD ONLY; 1934-1946 1/2 Ton Truck - DRAG LINK ONLY

For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Chevrolet Parts - 1927-59 TIE ROD-DRAG LINK-IDLER BALL STUD-WELD
SA-157
USD $21.95 EA
Buy 2+: $19.75
CHEVROLET 1927-59 TIE ROD-DRAG LINK-IDLER BALL STUD-WELD
These studs fit 1927-1959 Chevrolet & GMC cars & trucks. They are a replacement stud for tie rod ends, drag link ends and idler arms. To install a new ball, use a 1/2" drill bit and drill the bottom of the shank down about 1/8. Press out the ball in a hydraulic press. Press in the new ball stud. CAUTION: Be sure the new ball is fully seated in the arm and down tight (clamp in place if necessary). Weld the new ball stud in place. Have a certified welder do this job to assure a good quality weld since a failure of this part could be catastrophic. DIMENSIONS: 1" DIA. BALL WITH .532" SHANK Specific Applications: 1927-1959 Passenger & 1/2 Ton Truck - TIE ROD ONLY; 1934-1946 1/2 Ton Truck - DRAG LINK ONLY; 1949-1954 Passenger - IDLER ARM ONLY

For 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Chevrolet Parts - 1946-1959 TRUCK TIE ROD BALL STUD - TAPERED
SA-154
USD $34.95 EA
CHEVROLET 1946-1959 TRUCK TIE ROD BALL STUD - TAPERED
This Tie Rod Ball Stud fits 1946-1959 Chevrolet & GMC trucks (exc 1/2 Ton). They are threaded replacements for the stud that the tie rod ends mount onto. CAUTION: Be sure the new ball is fully seated in the arm and down tight when installed. This stud has a tapered shank. Dimensions: 1" Diameter Ball with .532" Diameter Stud. Replaces GM# 377992 Specific Applications: 1946-1959 Truck 3/4, 1 & 1-1/2 Ton (exc D-D, UJ, UK, VJ, VK)

For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
Dust Seals
Chevrolet Parts - 1939-1966 TIE ROD END DUST SEAL
CV-96
USD $8.95 EA
CHEVROLET 1939-1966 TIE ROD END DUST SEAL
This is a rubber tie rod end seal for 1939-1966 Chevrolet & GMC cars & trucks. Up to four required per vehicle. Replaces GM# 3687643 Specific Applications: 1939-1952: All Passenger (exc 1939-1940 Straight Axle Models - JB, KB); 1953-1964: All full size & Corvette; 1960-1962: Chevy & GMC 1/2 Ton Trucks; 1963 Series 20 3/4 Ton 4WD; 1964-1966 4WD Trucks

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks
Modern Tie Rod and Ends
Chevrolet Parts - 1947-55 1ST SERIES PICKUP TIE ROD & ENDS
47-TRK
Wait List
CHEVROLET 1947-55 1ST SERIES PICKUP TIE ROD & ENDS
This Tie Rod Assembly fits 1947-1955 (1st Series) Chevrolet & GMC 1/2 & 3/4 ton trucks. The assembly comes with a 1" diameter rod and two adjustable modern style fixed tie rods. Requires removing two original ball studs for installation. Replaces GM# 367500, 367528, 374226, 274227

For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Repair Kits
Chevrolet Parts - 1927-1959 TIE ROD & DRAG LINK REPAIR KIT
FS-148
USD $36.95 KIT
CHEVROLET 1927-1959 TIE ROD & DRAG LINK REPAIR KIT
QUALITY MATTERS ON THIS IMPORTANT STEERING COMPONENT! This Tie Rod End or Drag Link End Repair Kit fits 1927-1959 Chevrolet cars & Chevy & GMC trucks. Yes, there are cheaper repair kits available, but this is a true case of "you get what you pay for!" Kits include: pistons - cups, springs and plugs to replace all internal parts of two tie rod or drag link ends. Spring dimensions: OD .929" x ID .570" x .830" Overall Length. NOTE: This kit WILL NOT WORK on 1930-1931 Tie Rod Ends!! Replaces GM# 601148, 608840 Specific Applications are: 1927-1952 Commercial (exc. Utility) - DRAG LINK ENDS; 1927-1954 Passenger - DRAG LINK ENDS; NOTE: 1937-1938 Master (GB & HB) Require 2 kits to repair the drag link ends. 1932-1938 All (exc. 1933-1936 Standard Pass, 1937-1938 Pass with Straight Axle - Models CC,DC,EC,FC,GB,HB) - TIE ROD ENDS; 1939-1942 Commercial (exc. Utility) - TIE ROD ENDS; 1946-1959 Commercial (exc. Utility, D-D) - TIE ROD ENDS.

For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Tie Rod Assemblies
Chevrolet Parts - 1932-1954 CAR/TRUCK TIE ROD-LESS ENDS
CD-27
USD $64.95 EA
CHEVROLET 1932-1954 CAR/TRUCK TIE ROD-LESS ENDS
This is the steel rod that attaches to the tie rod ends for 1932-1955 Chevrolet & GMC cars & trucks. It is the proper length and diameter. It is threaded on both ends for the left & right tie rod ends. Replace yours if it is bent to get more accurate wheel alignment. Made in the USA! Dimensions: 43-3/16" Long with 25/32"-16 Thread, 13/16" OD. Replaces GM# 367500, 367528 Specific Applications: 1932-1936: All Pass & Truck except 1933-1936 Standard; 1937-1942: All Commercial - 1/2 to 1 Ton; 1946-1955(1st series) 1/2 and 3/4 ton NOTE: This item must be shipped in a tube. A tube charge of $8.00 will be applied, in addition to freight charges.

For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
Tie Rod Ends
Chevrolet Parts - 1935-1959 HEAVY TRUCK TIE ROD END-LEFT
ML-22L
USD $54.95 EA
CHEVROLET 1935-1959 HEAVY TRUCK TIE ROD END-LEFT
THIS ITEM IS AN OBSOLETE PART - LIMITED SUPPLY - AVAILABILITY IS SUBJECT TO STOCK ON HAND. This is a replacement tie rod end for 1935-1959 Chevrolet & GMC heavy trucks. Specify Right or Left when ordering. Dimensions: 4-5/32" Long; 13/16-18 Thread. Replaces GM# 601395, 601396 Specific Applications: 1935-1942 Chevy & GMC Utility Trucks - 1-1/2 Ton Models (Exc. MT, MY, COE); 1946-1959 Chevy & GMC 1 & 1-1/2 Ton Trucks (exc. UJ, UK, VJ, VK, SBC, H.D.)

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
Chevrolet Parts - 1935-1959 HEAVY TRUCK TIE ROD END-RIGHT
ML-22R
USD $54.95 EA
CHEVROLET 1935-1959 HEAVY TRUCK TIE ROD END-RIGHT
THIS ITEM IS AN OBSOLETE PART - LIMITED SUPPLY - AVAILABILITY IS SUBJECT TO STOCK ON HAND. This is a replacement tie rod end for 1935-1959 Chevrolet & GMC heavy trucks. Specify Right or Left when ordering. Dimensions: 4-5/32" Long; 13/16-18 Thread. Replaces GM# 601395, 601396 Specific Applications: 1935-1942 Chevy & GMC Utility Trucks - 1-1/2 Ton Models (Exc. MT, MY, COE); 1946-1959 Chevy & GMC 1 & 1-1/2 Ton Trucks (exc. UJ, UK, VJ, VK, SBC, H.D.)

For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
Chevrolet Parts - 1932-1959 CAR/TRUCK TIE ROD ENDS-REPLACEMENT
AF-168
USD $64.95 PR
CHEVROLET 1932-1959 CAR/TRUCK TIE ROD ENDS-REPLACEMENT
These tie rod ends replace the original housings completely. They come with a fixed ball stud, like a modern tie rod end. You must remove the original ball stud to install this tie rod end. Replaces GM# 374226, 374227 Specific Applications: 1932-1938 Passenger cars & trucks (Except 1933-1936 Std & 1937-1938 Master w/straight axle); 1937-1942 1 Ton Trucks; 1937-1954 3/4 Ton Trucks; 1937-1959 1/2 Ton Trucks Dimensions: 13/16" OD x 5" OL, Center stud to end is 4"; 16 threads per inch; 3/4" UNF. Diameter of stud is .525" to .540" tapered.

For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Chevrolet Parts - 1948-59 COE & 2 TON TIE ROD END-LEFT
ML-20L
Wait List
CHEVROLET 1948-59 COE & 2 TON TIE ROD END-LEFT
1948-59 COE & 2 TON TIE ROD END-LEFT

For 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
Chevrolet Parts - 1948-59 COE & 2 TON TIE ROD END-RIGHT
ML-20R
Wait List
CHEVROLET 1948-59 COE & 2 TON TIE ROD END-RIGHT
1948-59 COE & 2 TON TIE ROD END-RIGHT

For 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
  1. The Filling Station »
  2. 1954 Chevrolet Truck Parts »
  3. Steering »
  4. Tie Rods »
Filters
Vehicle: Truck - Switch To Car / All
Year: 1954 - Clear Filter

Copyright ©2025 The Filling Station, LLC
E-mail: fssales@fillingstation.com