FAX: (541) 258-6968v
 
New CustomersLogin
  1. The Filling Station »
  2. 1955 Chevrolet Car Parts »
  3. Steering »
  4. Tie Rods »
Filters
Vehicle: Car - Switch To Truck / All
Year: 1955 - Clear Filter

Ball Studs
Chevrolet Parts - 1927-59 TIE ROD-DRAG LINK BALL STUD - THREADED
SA-157T
USD $21.95 EA
Buy 2+: $19.95
CHEVROLET 1927-59 TIE ROD-DRAG LINK BALL STUD - THREADED
These studs fit 1927-1959 Chevrolet & GMC cars & trucks. They are threaded replacements for the stud that the tie rod ends & drag link ends mount onto. To install a new ball, use a 1/2" drill bit and drill the bottom of the shank down about 1/8. Press out the ball in a hydraulic press. Press in the new ball stud. CAUTION: Be sure the new ball is fully seated in the arm and down tight (clamp in place if necessary). Dimensions: 1" Diameter Ball with .532" Diameter Stud Specific Applications: 1927-1959 Passenger & 1/2 Ton Truck - TIE ROD ONLY; 1934-1946 1/2 Ton Truck - DRAG LINK ONLY

For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Dust Seals
Chevrolet Parts - 1939-1966 TIE ROD END DUST SEAL
CV-96
Wait List
CHEVROLET 1939-1966 TIE ROD END DUST SEAL
This is a rubber tie rod end seal for 1939-1966 Chevrolet & GMC cars & trucks. Up to four required per vehicle. Replaces GM# 3687643 Specific Applications: 1939-1952: All Passenger (exc 1939-1940 Straight Axle Models - JB, KB); 1953-1964: All full size & Corvette; 1960-1962: Chevy & GMC 1/2 Ton Trucks; 1963 Series 20 3/4 Ton 4WD; 1964-1966 4WD Trucks

For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Cars and Trucks
Repair Kits
Chevrolet Parts - 1927-1959 TIE ROD & DRAG LINK REPAIR KIT
FS-148
Wait List
CHEVROLET 1927-1959 TIE ROD & DRAG LINK REPAIR KIT
QUALITY MATTERS ON THIS IMPORTANT STEERING COMPONENT! This Tie Rod End or Drag Link End Repair Kit fits 1927-1959 Chevrolet cars & Chevy & GMC trucks. Yes, there are cheaper repair kits available, but this is a true case of "you get what you pay for!" Kits include: pistons - cups, springs and plugs to replace all internal parts of two tie rod or drag link ends. Spring dimensions: OD .929" x ID .570" x .830" Overall Length. NOTE: This kit WILL NOT WORK on 1930-1931 Tie Rod Ends!! Replaces GM# 601148, 608840 Specific Applications are: 1927-1952 Commercial (exc. Utility) - DRAG LINK ENDS; 1927-1954 Passenger - DRAG LINK ENDS; NOTE: 1937-1938 Master (GB & HB) Require 2 kits to repair the drag link ends. 1932-1938 All (exc. 1933-1936 Standard Pass, 1937-1938 Pass with Straight Axle - Models CC,DC,EC,FC,GB,HB) - TIE ROD ENDS; 1939-1942 Commercial (exc. Utility) - TIE ROD ENDS; 1946-1959 Commercial (exc. Utility, D-D) - TIE ROD ENDS.

For 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Tie Rod Assemblies
Chevrolet Parts - 1932-1954 CAR/TRUCK TIE ROD-LESS ENDS
CD-27
USD $64.95 EA
CHEVROLET 1932-1954 CAR/TRUCK TIE ROD-LESS ENDS
This is the steel rod that attaches to the tie rod ends for 1932-1955 Chevrolet & GMC cars & trucks. It is the proper length and diameter. It is threaded on both ends for the left & right tie rod ends. Replace yours if it is bent to get more accurate wheel alignment. Made in the USA! Dimensions: 43-3/16" Long with 25/32"-16 Thread, 13/16" OD. Replaces GM# 367500, 367528 Specific Applications: 1932-1936: All Pass & Truck except 1933-1936 Standard; 1937-1942: All Commercial - 1/2 to 1 Ton; 1946-1955(1st series) 1/2 and 3/4 ton NOTE: This item must be shipped in a tube. A tube charge of $8.00 will be applied, in addition to freight charges.

For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
Tie Rod Ends
Chevrolet Parts - 1955-57 PASSENGER TIE ROD SLEEVE
RW-24
USD $15.95 EA
CHEVROLET 1955-57 PASSENGER TIE ROD SLEEVE
1955-57 PASSENGER TIE ROD SLEEVE

For 1955 1956 1957 Chevrolet Cars
Chevrolet Parts - 1955-1957 PASSENGER CAR OUTER TIE ROD END
DC-054
USD $24.95 EA
CHEVROLET 1955-1957 PASSENGER CAR OUTER TIE ROD END
This is an Outer Tie Rod End fo 1955-1957 Chevrolet passenger cars. It has a Left Hand Thread 9/16"-18. Two pieces required per vehicle.

For 1955 1956 1957 Chevrolet Cars
Chevrolet Parts - 1955-1957 Passenger INNER TIE ROD END-MANUAL
RW-211
USD $28.95 EA
CHEVROLET 1955-1957 Passenger INNER TIE ROD END-MANUAL
Passenger tie rod end INNER (2 req’d manual steering, 1 each required P/S )

For 1955 1956 1957 Chevrolet Cars
Chevrolet Parts - 1955-57 INNER LEFT TIE ROD END-P/S
RW-212
USD $28.95 EA
CHEVROLET 1955-57 INNER LEFT TIE ROD END-P/S
1955-57 INNER LEFT TIE ROD END-P/S

For 1955 1956 1957 Chevrolet Cars
Chevrolet Parts - 1932-1959 CAR/TRUCK TIE ROD ENDS-REPLACEMENT
AF-168
USD $64.95 PR
CHEVROLET 1932-1959 CAR/TRUCK TIE ROD ENDS-REPLACEMENT
These tie rod ends replace the original housings completely. They come with a fixed ball stud, like a modern tie rod end. You must remove the original ball stud to install this tie rod end. Replaces GM# 374226, 374227 Specific Applications: 1932-1938 Passenger cars & trucks (Except 1933-1936 Std & 1937-1938 Master w/straight axle); 1937-1942 1 Ton Trucks; 1937-1954 3/4 Ton Trucks; 1937-1959 1/2 Ton Trucks Dimensions: 13/16" OD x 5" OL, Center stud to end is 4"; 16 threads per inch; 3/4" UNF. Diameter of stud is .525" to .540" tapered.

For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
  1. The Filling Station »
  2. 1955 Chevrolet Car Parts »
  3. Steering »
  4. Tie Rods »
Filters
Vehicle: Car - Switch To Truck / All
Year: 1955 - Clear Filter

Copyright ©2025 The Filling Station, LLC
E-mail: fssales@fillingstation.com