FAX: (541) 258-6968
 
New CustomersLogin
15 Items Found
Axle Hardware
Chevrolet Parts - 1925-32 REAR AXLE SHAFT THICK WASHER
AF-176
USD $2.95 EA
CHEVROLET 1925-32 REAR AXLE SHAFT THICK WASHER
This thick rear axle washer is used on all 1925-1932 Chevrolet Passenger cars & 1/2 Ton trucks (except 1932 models with large axles). Replaces GM# 341705. Two washers required per vehicle. Dimensions: ID .812" x OD 1.460" x .214" Thick.

For 1925 1926 1927 1928 1929 1930 1931 1932 Chevrolet Cars and Trucks
Axle Seals
Chevrolet Parts - 1930-33 1-1/2 TON AXLE SEAL - INNER
RW-500
USD $6.95 EA
CHEVROLET 1930-33 1-1/2 TON AXLE SEAL - INNER
This is a replacement rear axle INNER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Designed for 2" OD at seal surface on axle shaft. Part of assembly GM# 359526 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks
Chevrolet Parts - 1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
RW-499
USD $17.95 EA
CHEVROLET 1930LATE-33 1-1/2 TON AXLE SEAL - OUTER
This is a replacement rear axle OUTER seal for 1930-1933 Chevrolet 1-1/2 ton trucks only. In 1930, this seal will work on the Late Series LS only as the axle size was changed mid-year in 1930. Part of assembly GM# 359326 Note: Seals listed for 1930-33 are neoprene replacements for the original leather or felt seals. This requires reusing the old seal housing to hold the new replacement seal. Do not discard any of the original parts until you are sure you have the new parts installed correctly. Call our technical support for further assistance (541) 258-2114.

For 1930 1931 1932 1933 Chevrolet Trucks
Chevrolet Parts - 1925-31 REAR AXLE INNER SEAL ASSY.
AF-82
USD $64.50 EA
CHEVROLET 1925-31 REAR AXLE INNER SEAL ASSY.
The inner axle seal does the most to prevent oil leaks on early cars & pickups. It is likely that 80-90 year old seals are not doing what they need to do to prevent leaks. Replace this vital seal before you need to replace your brake linings from being oil soaked. Note: This seal is a complete replacement unit for the original inner seal (either cork or leather) used on 1925-1931 Chevrolet passenger cars & 1/2 ton trucks. Comes with a new neoprene seal installed into a new housing. Also see the outer seal replacement RW-41.

For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
Chevrolet Parts - 1930-1931 REAR AXLE SEAL KIT
AF-82K
USD $159.50 EA
CHEVROLET 1930-1931 REAR AXLE SEAL KIT
This seal kit includes two inner neoprene seal assemblies (AF-82); two outer neoprene seals that replace the felt (Use with the original seal housing); and two outer seal retainer gaskets. This kit gives you all the components necessary to replace the 85 year old original axle seals in a 1930-1931 Chevrolet passenger car & 1/2 ton truck differential. Kit will do both sides.

For 1930 1931 Chevrolet Cars and Trucks
Hub Puller Tool Rental
Chevrolet Parts - 1930-1932 HUB PULLER RENTAL
AF-600
USD $35.00 EA
CHEVROLET 1930-1932 HUB PULLER RENTAL
This tool is used to pull the rear brake drum on 1930-1932 Chevrolet cars & trucks. Specially designed for this purpose - this tool is an absolute necessity during this procedure. There is a $250.00 deposit on this rental item. You will be charged $35.00 for the rental & $250.00 deposit. Return the tool - in good condition and receive a refund of $250.00 - if returned in good condition within 30 days. Rental is $25.00 per week after 30 days.

For 1930 1931 1932 Chevrolet Cars and Trucks
Rear Axle Shafts
Chevrolet Parts - 1930-1931 CAR/PICKUP REAR AXLE SHAFT
CV-712
USD $395.00 EA
CHEVROLET 1930-1931 CAR/PICKUP REAR AXLE SHAFT
This is a direct replacement axle for all 1930 & 1931 Chevrolet passenger cars & 1/2 ton trucks. These are newly manufactured axles that have been machined from Tempered Chrome Moly. Dimensions: Length - 30.812" , Thread Size - 3/4-16, Spline Dia. 1.225". Made in the USA! Replaces GM# 357497 This part is oversize and additional delivery charges will apply. Call or email us for a freight quote.

For 1930 1931 Chevrolet Cars and Trucks
Seals
Chevrolet Parts - 1925-54 MODIFIED FRONT WHEEL SEAL
FS-213M
USD $17.95 EA
CHEVROLET 1925-54 MODIFIED FRONT WHEEL SEAL
This is a Modified Front Wheel Seal designed for our Tapered Roller Bearing kits FS-178K & FS-216K. Dimensions: Thickness - .368"; OD - 3.130". Hub lip OD 2.975"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Chevrolet Parts - 1923-1940 CAR/TRUCK FRONT WHEEL SEAL
FS-202
USD $23.95 EA
CHEVROLET 1923-1940 CAR/TRUCK FRONT WHEEL SEAL
This is a FRONT inner wheel seal for 1916-1940 Chevrolet & GMC cars & trucks. This seal is a felt or neoprene replacement seal. Dimensions: 1.77" ID, 2.97" OD. Replaces GM# 335448, 352488, National 5070 Specific Applications: 1923-1930 All Passenger & Truck; 1931-40 Passenger and Commercial (exc Utility or 1933-1936 Standard Passenger)

For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Wheel Bearings
Chevrolet Parts - 1923-1961 FRONT WHEEL BALL BEARING - OUTER
FS-177
USD $29.95 EA
CHEVROLET 1923-1961 FRONT WHEEL BALL BEARING - OUTER
This is a complete OUTER FRONT BALL bearing assembly for 1923-1961 Chevrolet & GMC cars & trucks. Dimensions: OD 2 5/64" (2.078"), ID 3/4" (.0722"). Replaces GM# 909567, 909667, 909767, 909067, 909501, 909601, 909701, 909001, B-01, B-67 Specific Applications: 1923-1930: All Passenger & Truck - Replacement; 1931-1942: All (exc. Utility & 1933-36 Standard) - Replacement; 1946-1954: Passenger & 1/2 Ton Trucks - Replacement; 1955-1960: Passenger; 1955-1961: 1/2 Ton Truck (exc. 4WD)

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Chevrolet Parts - 1923-1961 FRONT WHEEL TAPERED BEARING-OUTER
FS-177R
USD $32.95 EA
CHEVROLET 1923-1961 FRONT WHEEL TAPERED BEARING-OUTER
See also FS-178K, FS-216K or FS-66K for tapered roller bearing kit to replace all four inner and outer ball bearings with tapered roller type bearings. Bearing ID is .75" and OD is 2.08", Thick - 0.67"

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 Chevrolet Cars and Trucks
Chevrolet Parts - 1923-1940 FRONT WHEEL BALL BEARING - INNER
FS-178
USD $39.95 EA
CHEVROLET 1923-1940 FRONT WHEEL BALL BEARING - INNER
This is a complete INNER Front Ball Bearing assembly for all 1925-1940 Chevrolet & GMC cars & trucks (Exc 1933-1936 Standard & 1931-1940 Utility trucks). Dimensions: OD 2.961"; ID inner race 1.179". Replaces GM# 909502, 909602, 909702, 909002 See also FS-178K tapered roller bearing replacement kit.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Chevrolet Parts - 1925-1959 FRONT TAPERED WHEEL BEARING-INNER
FS-216R
USD $59.95 EA
CHEVROLET 1925-1959 FRONT TAPERED WHEEL BEARING-INNER
This is an INNER TAPERED ROLLER FRONT wheel bearing 1925-1959 Chevrolet & GMC cars & trucks. This bearing replaces the original ball bearing type with tapered roller type bearing. Dimensions: OD 2.966" (75.33mm) x ID 1.281" (32.53mm). Replaces GM# 909052, 909552, 909602, 909702 Specific Applications: 1925-1940 All Passenger & Trucks (exc. 1931-1940 Utility or 1933-1936 Standard Passenger) - requires adapter - see notes below; 1941-1942 All Passenger & Trucks (exc. Utility); 1946-1954 All Passenge; 1946-1959 Chevy & GMC 1/2 Ton Trucks NOTE: To use this bearing on 1925-1940 passenger & 1/2 ton models (except 1933-35 Standard & Utility), you must also purchase and install FS-178RA bearing adapter.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Cars and Trucks
Chevrolet Parts - 1923-1940 FRONT WHEEL TAPERED BEARING - INNER
FS-178R
USD $99.00 EA
CHEVROLET 1923-1940 FRONT WHEEL TAPERED BEARING - INNER
This is an INNER Tapered Roller Bearing for 1923-1940 Chevrolet passenger cars & 1/2 ton trucks, except 1933-36 Standard & Utility. Replaces GM# 909002, 909502, 909602, 909702. NOTE: Requires using FS-213M Wheel Seal.

For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
Chevrolet Parts - 1923-1940 FRONT TAPERED WHEEL BEARING KIT
FS-178K
USD $199.50 SET
CHEVROLET 1923-1940 FRONT TAPERED WHEEL BEARING KIT
This is a tapered FRONT wheel bearing kit for 1923-1940 Chevrolet car & Chevy & GMC trucks. This kit replaces the original ball bearing type with tapered roller type bearings. Kit includes: 2 each INNER and 2 each OUTER tapered roller bearings with 2 each front wheel seals, made especially for this installation. Replaces GM# 909001, 909002, 909501, 909601, 909701, 909502, 909602, 909702 Specific Applications: 1923-1930: All Passenger & Trucks; 1931-1940: All (except 1933-36 Standard Passenger or Utility Truck) NOTE: 1937-1939 Canadian manufactured cars & trucks used different inner wheel bearings and we do not have bearings for that application. Most foreign export Chevrolets were made in Canada. Check your original bearing numbers and dimensions BEFORE ordering! Dimensions: INNER Bearing - OD 2.966" (75.33mm) x ID 1.1885" (30.18mm); OUTER Bearing - OD 2.080" (52.83mm) x ID .750" (19.05mm)

For 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars and Trucks
15 Items Found
Copyright ©2024 The Filling Station, LLC
E-mail: fssales@fillingstation.com