Anti-Friction
Poly Slide Spring Separator controls friction and squeaks between spring leaves to give a smooth ride. Each roll is 20ft. long x 1-3/4" wide.
For 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Leaf spring inserts for softer ride. Dimensions: 2-1/2" OD x 3/4" high. Comes in a set of four pieces. Also see Poly Slide Seperators.
For 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Cars and Trucks
Grease Fittings
GREASE FITTING-45 DEGREE*1/8"THREAD
For All Chevrolet Cars
Shackle Pins
This spring shackle tension washer fits all 1930-1932 Chevrolet passenger cars & 1/2 ton trucks; also 1933-1935 Standard passenger models on the front & rear shackles. One tension washer required per shackle. Refer to shop manual for procedure to adjust the shackle. Do not over-tighten! When adjusted properly, install the lock plate AF-96 to hold the adjustment. Replaces GM# 359469 NOTE: This is a LIMITED SUPPLY ITEM - availability is subject to stock on hand.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
This shackle pin fits 1930-1935 Chevrolet cars & trucks. These tapered pins are subject to extreme wear and often need to be replaced. They must be pressed into place in the end of the spring and into the bracket on the frame. This will take a special tool, like a Porta-Power, to install them. Dimensions: 2-15/16" long x .762" OD. Replaces GM# 358326. Up to 8 pieces required per vehicle. Specific Applications: 1930-33: All Passenger & Truck - FRONT, 1930-33: All Passenger & 1/2 Ton Truck - REAR, 1934-35: Standard Passenger - FRONT & REAR.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Spring Assemblies
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for all 1930-1935 Chevrolet passenger cars. They are an 7-leaf spring and are sold in pairs. Springs come with bushings installed in the frame end. Order tapered shackle pin RW-39 separately and these can be installed when the springs are manufactured. Eye-to eye measurement (along the curvature) is 54-1/8" O.C. Replaces GM# 475017 Specific Applications: 1930 Sedan & Sedan Delivery, 1931-32 all passenger, 1933 Standard passenger, 1933 Master Phaeton, Roadster, Coupe & Cabriolet, 1934-35 Standard Phaeton, Roadster, Coupe, Coach & Sedan. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1930-1933 Chevrolet passenger cars that have 7-leaf front springs. Replaces GM# 366967. Dimensions: center bolt to center of eye is 19-1/16 & 17-1/16 inches following the arch of the spring. Height of arch is 2.75 inches. Specific Applications: 1930-1933 Passenger (exc. Special Sedan, Town Sedan, Coach with Fender Wells) - Models AD, AE, BA, CA SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1930 1931 1932 1933 Chevrolet Cars
These are new replacement leaf springs, made to original specifications here in the USA! These REAR leaf springs are for all 1930-1935 Chevrolet passenger cars that have 8-leaf rear springs. Eye-to eye measurement (along the curvature) is 54-1/8" O.C. Replaces GM# 357375, 369099 Specific Applications: 1930 Sedan, Club Sedan, Coach & Sedan Delivery; 1931-1932 Phaeton, Sedan, Special Sedan, Landau Phaeton, Cabriolet, Coupe, Coach & Sedan Delivery; 1933 Master: Phaeton, Sport Roadster, Sport Coupe, Cabriolet; 1933-1935 Standard passenger (except Sedan, Coach or Sedan Delivery) For 1931-1932 Models with Accessory Extension Trunk - See FS-828 for Heavy Duty Springs SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1930 1931 1932 1933 Chevrolet Cars
These are new replacement leaf springs, made to original specifications here in the USA! These FRONT leaf springs are for all 1930-1933 Chevrolet passenger cars & 1/2 ton panel trucks that have 8-leaf front springs. Replaces GM# 365172 Specific Applications: 1930-1932 Special Sedan, Town Sedan, Coach with Fender Wells - Models AD, AE, BA; 1930-1933 All models with Fender Mounted Spare Tires; 1932 De Luxe 1/2 Ton Models; 1933 1/2 Ton Panel Truck - Model CB SPECIAL NOTE: RW-39 Tapered Spring Shackle Pin is not included with these springs. If these are purchased with the springs, you can request that these be installed when the springs are made. NOTE: Some early springs had small, curvy top leaves fastened to the top of the spring. We cannot duplicate this feature. The springs we provide will be a replacement spring with the carrying capacity and dimensions of the original. They are not intended to be an exact reproduction, merely a good replacement of the original. Leaf springs are extra heavy and special freight charges will apply. Call or email us for a freight quote.
For 1930 1931 1932 1933 Chevrolet Cars and Trucks
Spring Bolts
This is a slotted (castle) NUT for the FRONT & REAR spring bolt for 1925-1934 Chevrolet cars & trucks. Dimensions: 9/16"-18 X 7/8" Hex X .61" Tall. Use with FS-671 Bolt & FS-672 Bushing. 1925-1929 vehicles - 12 nuts required per vehicle. 1929-1935 vehicles - up to 4 nuts required per vehicle. Replaces GM# 119255 Specific Applications: 1925-1935 Passenger & Truck (exc. 1934-1935 Master) - FRONT; 1925-1935 Passenger & 1/2 Ton Truck (exc. 1934-1935 Master) - REAR
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
fine thread 4 1/4 LONG 5/16 WITH
For All Chevrolet Cars and Trucks
This spring bolt fits 1925-1934 Chevrolet cars & trucks. Bolt is 9/16"-18 x 3-3/16". Note: 1925-1929 models require 12 each; 1930-1933 require 4 each; 1934 Standard requires 2 each. Replaces GM # 344336 Specific Applications: 1925-1933 All Passenger & Truck FRONT; 1934 Standard Passenger FRONT: 1925-1933 Passenger & 1/2 Ton REAR
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
Spring Bushings
This spring bushing fits 1925-1935 Chevrolet cars & trucks. It is a bronze bushing 3/4" OD x 1-11/16" long. It is used to mount the leaf springs on front and rear. Note: 1925-1929 models use BOTH FS-639 (11/16" OD) & FS-672 (3/4" OD) - measure before ordering. Replaces GM# 344277. Specific Applications: 1925-1933 Passenger & Truck, 1934-1935 Standard - FRONT; 1925-1933 Passenger & 1/2 Ton Truck, 1934-1935 Standard - REAR; 1930-1933 & 1934-1935 Standard require 4 each. 1925-1929 models see also FS-639 for 11/16" OD bushing. See FS-671 for bolt and FS-510 for nut.
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Spring Shackles
1930-32 passenger & 1/2 ton & 1933-35 standard passenger. One lock plate required per shackle. Refer to shop manual for procedure to adjust the shackle. Do not over-tighten! When adjusted properly, install the lock plate to hold the adjustment.
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
We were able to find a quantity of NORS (New Old Replacement Stock) FRONT shackles for 1930-1935 Chevrolet cars & trucks. These are a limited supply item and we cannot reorder when they are gone. Each kit includes: 2 Side Plates, 2 Shackle Pins (tapered), Spring Tension Washer, Center Bolt, Lock Plate & Nut. LIMITED SUPPLY ITEM - availability subject to stock on hand. Specific Applications: 1930-33 All Chevrolet Passenger & Trucks 1934-35 All Standard Passenger Models. Replaces GM#s 602998 & 363009
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
LIMITED SUPPLY ITEM - Availability is subject to stock on hand. This is a NORS (New Old Replacement Stock) REAR shackle for 1930-1935 Chevy cars & 1/2 ton trucks. Each kit includes: 2 Side Plates, 2 Shackle Pins (tapered), Spring Tension Washer, Center Bolt, Lock Plate & Nut. Specific Applications: 1930-33 All passenger & 1/2 Ton models 1934-35 All Standard Passenger Models. Replaces GM#s 602999 & 363010
For 1930 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks
Spring U-Bolts
This is a Front & Rear Spring U-BoltCompare to your original and SA-112 (4-3/4") Fits 1929-39 Passenger - FRONT; 1929-55 (1st Series) 1/2 Ton - FRONT (In 1955, used on 1st Series only) 1938-54 Passenger - REAR; 1947-54 1/2 Ton - REAR;
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
Fits: 1931-38 Passenger (exc 1933-36 standard) - REAR; 1933-36 Sedan Delivery - REAR; 1931-46 1/2 ton trucks - REAR. Dimensions: 1/2 x 1-7/8 x 6-7/8 with Round top.
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
This is a Leaf Spring U-Bolt for 1929-1955 Chevrolet & GMC cars & trucks. Dimensions: 1/2" Diameter x 1-7/8" Inside Width x 4-3/4" High - Square Top. Compare to your original and SA-112D (3-3/4" High) Specific Applications: 1929-1939 Passenger - FRONT; 1929-1955 (1st Series) 1/2 Ton - FRONT; 1938-1954 Passenger - REAR; 1947-1954 1/2 Ton - REAR
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks