With bolt-on clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to freight charges.
With adhesive clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
With adhesive clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to oversize freight charges.
With bolt-on clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
With bolt-on clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
This set includes eight side trim pieces for each side. Includes molding clips for all 16 pieces. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
This is an 18 piece set of body side moldings for 1964 Impala 4-door models. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This set includes eight side trim pieces for each side. Includes molding clips for all 16 pieces. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO SHIPPING.
This is a 16 piece set of side trim moldings for 1961 Chevrolet Impala 2-Door models. This item is oversize and special freight charges will apply. Please call or email us for a freight quote. There will be an $8.00 tube charge in addition to freight charges.
8 pieces. With bolt-on clips. This item is oversize and special freight charges will apply. Call or email us for a freight quote. . Note: tube charge of $8.00 will be in addition to oversize freight charges.
This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to oversize freight charges.
This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to oversize freight charges.
14 piece set with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Tube charge of $8.00 will be in addition to freight charges.
14 pieces with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to oversize freight charges.
14 Piece with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Tube charge of $8.00 will be in addition to freight charges.
14 piece set with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will apply in addition to oversize freight charges.
14 piece set with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
Lower. 14 pieces. With clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
14 pieces with clips. This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
Set consists of 11 aluminum moldings extending from the front bumper to the tailgate, which accent the lower body lines on the side of the Suburban. Moldings are bright-anodized aluminum with a black painted accent stripe. Clips and hardware for attachment to the body are included except for lower bed front and rear moldings (4 pieces). This item is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
14 pieces with clips. Note: tube charge of $8.00 will be in addition to oversize freight charges. This part is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 12 piece Lower Exterior Molding Set for 1967-1968 Chevrolet Longbed Fleetside pickups. The set is for both sides and comes with bolt-on clips. This item is oversize and special freight charges will apply. Call or email us for a freight quote. Note: tube charge of $8.00 will be in addition to oversize freight charges.
This is a RIGHT side Quarter Molding for 1964 Impala SS 2-door models. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This Stainless Steel Quarter Panel Top Fin Molding fits all 1957 Chevrolet Bel Air models except Wagon and Nomad. Fits left or right side. Replaces GM# 3759699. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This 4 piece set includes 2 upper and 2 lower quarter panel moldings for 1959 Chevrolet Impala, 2-door hard top and convertible models. One set does both sides. Replaces GM part number 3764067-68.
These are beautifully reproduced stainless rocker moldings for all 1942-1948 Chevrolet passenger cars including Sedan Delivery. Replaces GM# 3681636 Note: Use L-104 wire type rocker molding clip set for mounting. THIS ITEM HAS A $8.00 TUBE CHARGE IN ADDITION TO OVERSIZE SHIPPING.
This stainless steel rocker molding set fits all 1949-1952 Chevrolet passenger cars. A beautiful polished copy of the originals. Replaces GM#'s 3688947 & 3688948 See L-19 for rocker molding clips. This is an oversize item and special freight charges will apply, in addition there is an $8.00 tube charge in addition to shipping charges. Call or email us for a freight quote.
This is a pair of Stainless Steel Rocker Moldings for all 1957 Chevrolet passenger cars. Moldings come with mounting fasteners. This item is oversize and special freight charges will apply. In addition, there is a tube charge of $8.00. Call or email us for a freight quote.
This is a close copy of the original "D"- shaped metal trim used to hold cloth tops in place on Fisher Body cars. Sold in 5 foot sections only. Made from extruded aluminum - 5/8" wide - no holes or nails. Bend as necessary. Most vehicles would take a minimum of three pieces to do one roof. THIS ITEM HAS AN $8.00 TUBE CHARGE IN ADDITION TO OVERSIZE SHIPPING CHARGES. Call or email us for a freight quote.
This is an exact copy of the original metal trim used to hold fabric tops in place on the roof of many Fisher Body cars from 1929-1931. It can also be used on 1931-1933 Chevrolet & GMC trucks. To install, you must drill holes for nails and bend as necessary. This item is sold in 94" sections only and will typically take more than one strip per vehicle. MEASURE & COMPARE TO YOUR ORIGINAL BEFORE ORDERING! BE AWARE THAT THIS TRIM IS DIFFICULT TO INSTALL. CONSIDER AF-584 WIRE-ON or AF-585 HIDEM INSTEAD as a replacement trim. CAUTION! SHIPPING CHARGES ON THIS ITEM ARE EXTREME. This item has an $8.00 tube charge in addition to OVERSIZE freight charges. Please call or email us for a freight quote.
For 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
This is a pair of Polished Stainless Steel Running Board Moldings for 1934-1938 Chevrolet Passenger Cars. The design is not as original, but is a DRIVER QUALITY replacement for these hard to find trim moldings. Moldings do not come with fasteners for mounting to the running boards. Order GR-308 Mounting Clips separately. See Also GR-28 for Original Style Show Quality Trim. Dimensions: 77-3/4" Long x 3/4" Wide. Replaces GM# 374143, 374144, 593614 This item requires a tube for shipping. A tube charge of $8.00 will be added. This item is oversize and special freight charges will apply. Please call or e-mail us for a freight quote.
This is a pair of Polished Stainless Steel Running Board Moldings for 1939 Chevrolet Master Deluxe Passenger Cars - Models JA. Moldings come with fasteners for mounting to the running boards. Dimensions: 75-1/2" Long x 1/2" Wide. Replaces GM# 350392 This item requires a tube for shipping. A tube charge of $8.00 will be added. In addition, this item is oversize and special freight charges will apply. Please call or email us for a freight quote.
This is a pair of Hand Formed Polished Stainless Steel Running Board Moldings for 1934-1938 Chevrolet Deluxe Passenger Cars. The design is like original with pointed ends. A true show quality piece, Made in the USA! Specify Year when ordering. Replaces GM# 374143, 374144, 377779, 593614 Specific Applications: 1934 Master - 77-5/16" Long; 1935 Master - 81" Long; 1936 Master - 78" Long; 1937 Master Deluxe - 77-7/8" Long; 1938 Master Deluxe - 79" Long This item requires a tube for shipping. A tube charge of $8.00 will be added. In addition, this item is oversize and special freight charges will apply. Please call or email us for a freight quote.
This is an 8-piece set of running board trim for 1931-1932 Chevrolet passenger cars. It is made in aluminum and the set does both sides. Made in the USA!
This tailgate upper molding fits 1967-1972 Chevrolet & GMC Fleetside & Blazer on the LEFT side. Replaces GM# 3917741 This item has an $8.00 shipping tube charge in addition to freight charges.
This tailgate upper molding fits 1967-1972 Chevrolet & GMC Fleetside & Blazer on the RIGHT side. Replaces GM# 3917742 This item has an $8.00 shipping tube charge in addition to freight charges.
This part is oversize and special freight charges will apply. Call or email us for a freight quote. Note: A $8.00 TUBE CHARGE will apply in addition to oversize freight charges.
1973-1980 CHEVROLET TRUCK/BLAZER TAILGATE BAND Polished aluminum with black painted insert and hardware. Fits truck or Blazer. Original for 1975-1980 "Cheyenne," also fits 1973-1980 tailgates. Replaces GM# 351499.
For 1973 1974 1975 1976 1977 1978 1979 1980 Chevrolet Trucks
This is a set of 1955-1957 Chevrolet Nomad Tailgate Side Trim - 6-piece set. Trim Parts is the only brand that you can trust to make parts that are of top quality, the right fit and are made by original GM tooling for an original look. 6 piece set. Original GM# 4658499 Made to Original Specifications with Original GM Tooling GM Licensed Restoration Part Specific Applications: 1955 Chevrolet Nomad 1956 Chevrolet Nomad 1957 Chevrolet Nomad
This is a complete set of chrome trim for 1955-1957 Chevrolet Nomad tailgate. Show off the unique tailgate on your 55-57 Chevy Nomad with these beautiful and correct reproduction chrome strips. The 11 step plating process used on these strips assures you that they will keep looking beautiful much longer than used or NOS units. Trim Parts' center bar is the more desired 2nd design and not the "knuckle buster" 1st design. 8 piece set. Includes GM# 4658499 Made to Original Specifications Original GM Tooling GM Licensed Restoration Part Specific Applications: 1955 Chevrolet Nomad 1956 Chevrolet Nomad 1957 Chevrolet Nomad
This is an Aluminum Tail Light Bezel Trim for 1967-1968 Chevrolet & 1967-1972 GMC Fleetside Pickups. Specify Right or Left when ordering. Replaces GM# 3917743, 3917744 Specific Applications: 1967-1968 Chevrolet Fleetside Pickups; 1967-1972 GMC Fleetside Pickups
This is an Aluminum Tail Light Bezel Trim for 1967-1968 Chevrolet & 1967-1972 GMC Fleetside Pickups. Specify Right or Left when ordering. Replaces GM# 3917743, 3917744 Specific Applications: 1967-1968 Chevrolet Fleetside Pickups; 1967-1972 GMC Fleetside Pickups
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks