This set of 4 Radio Mounting Spacers are necessary for proper fit of your original 1947-1953 Chevrolet or GMC radio. These spacers fit between radio and the edge of the lower dash aas well as over the turning shafts between the dash and the case, to support and properly align the unit.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This Steel Radio Mounting Bracket fits factory radios in 1954-1955 (1st Series) Chevrolet trucks and is an exact reproduction of the original mounting bracket. Made in the USA!
Wireless bluetooth interface for USA-630 and USA-SB. This adapter plugs into the CD changer port of your Custom Autosound radio and gives you the ability to do hands free calling from your bluetooth capable phone. Also listen to music stored on your A2DP enabled bluetooth device. If you have a CD changer or CD1 single player you can still use it with the adapter plugged in (there is a CD changer port on the control box of the Bluekit). Main control box has a 1.5' cord that goes to radio CD port, 6.5' cord to answer button and 3.5' cord from answer button to microphone.
This is a 19611962 Chevrolet RADIO FACE PLASTIC INSERT. This radio face insert is injection-molded of high quality clear acrylic. Made with correct white lettering and green edging detail. Another quality reproduction manufactured by Trim Parts. Made in the USA! Replaces GM# 7576914 Specific Applications: 1961-1962 Chevrolet Bel Air 1961-1962 Chevrolet Biscayne 1961-1962 Chevrolet Brookwood 1961-1962 Chevrolet Impala 1961-1962 Chevrolet Kingswood 1961-1962 Chevrolet Nomad 1961-1962 Chevrolet Parkwood
This is a molded radio speaker seal for 1947-1953 Chevrolet & GMC trucks. The one piece seal varies in height from 1-1/4" to 1-3/4". It is 9-1/4" long x 5-1/4" wide.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This Radio Speaker Cover is die-stamped black fiberboard and fits original factory AM radios in 1954-1955 Chevrolet trucks. In 1955 used in first series only.
Our dual dash speakers provide stereo sound from factory mono speaker locations. Available for most classic cars and trucks. The 1000 series speakers replace 'OEM' speakers that are held in place by screws. The 2000 series speakers replace speakers originally held in place by a metal bracket. These assemblies are prewired to 'plug in' instantly to our radios. Chose from Custom Autosound speakers or try our Kenwood speaker upgrades.
Our dual dash speakers provide stereo sound from factory mono speaker locations. Available for most classic cars and trucks. The 1000 series speakers replace 'OEM' speakers that are held in place by screws. The 2000 series speakers replace speakers originally held in place by a metal bracket. These assemblies are prewired to 'plug in' instantly to our radios. Chose from Custom Autosound speakers or try our Kenwood speaker upgrades.
Our new dual voice coil (DVC)speakers will give you the best quality sound possible from your original mono speaker location. These speakers have up to 70% more cone area than the conventional dual speaker setup, giving you improved bass response and 120 watt power handling. Both stereo channels connect directly to one speaker. This is the best sound solution for the original speaker location we have found. Available in 6x9" and 4 x 10".
Our new dual voice coil (DVC)speakers will give you the best quality sound possible from your original mono speaker location. These speakers have up to 70% more cone area than the conventional dual speaker setup, giving you improved bass response and 120 watt power handling. Both stereo channels connect directly to one speaker. This is the best sound solution for the original speaker location we have found. Available in 6 x 9" and 4 x 10"
Our dual dash speakers provide stereo sound from factory mono speaker locations. Available for most classic cars and trucks. The 1000 series speakers replace 'OEM' speakers that are held in place by screws. The 2000 series speakers replace speakers originally held in place by a metal bracket. These assemblies are prewired to 'plug in' instantly to our radios. Chose from Custom Autosound speakers or try our Kenwood speaker upgrades.
Our dual dash speakers provide stereo sound from factory mono speaker locations. Available for most classic cars and trucks. The 1000 series speakers replace 'OEM' speakers that are held in place by screws. The 2000 series speakers replace speakers originally held in place by a metal bracket. These assemblies are prewired to 'plug in' instantly to our radios. Chose from Custom Autosound speakers or try our Kenwood speaker upgrades.
You can now enhance sound quality with Custom Autosound new kick panel speaker assemblies! These new kicks sound great, enhance interior appearance and affords a "no modification" fit. Most models feature 6.5" coaxial (2-way) speakers with 80 watt poser handling capacity ('55-59 Chevy trucks use 4" 2-way 60 watt speakers). All "kicks" can be upgraded with Pioneer 6.5" coaxial 120 watt speakers ('55-59 Chevy trucks use Pioneer 4" 2-way 70 watt speakers). Kick panels come in black abs plastic and are sold with speakers only. Available for 1955-57 passenger; 1959-64 Impala; 1955-59(2nd Series) truck; and 1967-72 truck.
You can now enhance sound quality with Custom Autosound's new kick panel speaker assemblies! These new kicks sound great, enhance interior appearance and affords a "no modification" fit. Most models feature 6.5" coaxial (2-way) speakers with 80 watt poser handling capacity ('55-59 Chevy trucks use 4" 2-way 60 watt speakers). All "kicks" can be upgraded with Pioneer 6.5" coaxial 120 watt speakers ('55-59 Chevy trucks use Pioneer 4" 2-way 70 watt speakers). Kick panels come in black abs plastic and are sold with speakers only. Available for 1955-57 passenger; 1959-64 Impala; 1955-59(2nd Series) truck; and 1967-72 truck.