These wiper transmission chrome bezels mount on the surface of the cowl to hold the transmissions to the sheet metal. These fit all 1947-1953 Chevrolet & GMC trucks. Replaces GM# 3683911
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a 10 foot long windshield seal for 1936-1946 Chevrolet & GMC trucks. In 1936, used on Low Roof Cabs only. Strip must be trimmed to length. For 1937-1946 Trucks, we offer a one-piece vulcanized seal - See 60-481 or 60-447
These knobs are matched to NOS originals for both color and design. Install knob by placing in hot water (not boiling) until plastic softens. Push knob onto shank and it will grab tight as it cools.
These knobs are matched to NOS originals for both color and design. Install knob by placing in hot water (not boiling) until plastic softens. Push knob onto shank and it will grab tight as it cools.
This is a wiper control knob for 1952-1953 Chevrolet & GMC trucks. The knob is maroon plastic and mounts onto the control in the dash. See also CR-71C for chrome knob. Part of GM# 3699117
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This is a wiper control knob for 1947-1951 Chevrolet & GMC trucks. The knob is chrome plastic and mounts onto the control in the dash. See also CR-71 for maroon knob. Replaces GM# 3685141
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
These are tail light lens gaskets for 1939-1953 Chevrolet & GMC cars & trucks. 2-3/4" OD. Replaces GM# 921874
Specific Applications:
1940-1948 Sedan Delivery;
1949-1952 Station Wagon
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a pair of tail light lens gaskets for all 1949-1950 Chevrolet passenger cars. Gaskets are a cork & rubber composite material. Dimensions 2-1/4" x 3-9/16". Replaces GM# 5937858
This Windshield Seal fits 1954-1955 (1st Series) Chvrolet & GMC Trucks without stainless trim. The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
Specific Applications:
1954 - 1955 GMC - 100-22
1954 - 1954 GMC - 150-24
1954 - 1955 GMC - 250-22
1954 - 1955 GMC - 300
1954 - 1954 GMC - 350-27
1955 - 1955 GMC - 100 1955 - 1955 GMC - 350-8
This is a Windshield Seal for 1955-1959 (2nd Series) Chevrolet & GMC trucks without reveal molding. The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. See manufacturer's installation video: Click here to view
1955 - 1959 Chevrolet - Truck
1955 - 1955 GMC - 100-22
1955 - 1959 GMC - 250
1955 - 1959 GMC - 350-8
1959 - 1959 Chevrolet - 3B
1959 - 1959 Chevrolet - 3D
1959 - 1959 Chevrolet - 3F
Fits 1926-37 Cars on door ferrule; 1932-37 Trucks on door ferrule; 1951-69 Cars on truck lock cylinder; 1960-69 Cars & Trucks on door lock cylinders. Use under lock cylinder to protect paint.Also can be used on early door and trunk ferrules (C-111) to protect paint.
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 Chevrolet Cars and Trucks
This is a tail light lens gasket for Chevrolet & GMC panel trucks & Suburbans (with doors) for the single light mounted on the left rear door. Dimensions: 3-1/8" x 4-7/16" OL. Replaces GM# 5936907
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks
this is a license light lens gasket for 1947-1956 Chevrolet & GMC Panel Truck & Suburbans with light on rear cargo door. Dimensions: 1-3/16" x 4-1/16" Replaces GM# 5936904
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
These wiper transmission gaskets mount on the surface of the cowl where the chrome bezel holds the transmissions into the sheet metal. These fit all 1947-1953 Chevrolet & GMC trucks.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This fuel bowl gasket fits all 1929-1936 Chevrolet & GMC cars & trucks (exc. 1934 with metal bowl). The gasket is a cork & neoprene material. Dimensions: ID 1.594" (40.4mm) x OD 2.125 " (53.975mm) .125" (3.175mm) Thick. Made in the USA! Replaces GM# 854003, 5590037, AC FG-1
For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars and Trucks
This fuel bowl gasket fits all 1937-1955 Chevrolet & GMC cars & trucks with glass bowl fuel pumps. The gasket is a cork & neoprene material. Dimensions: ID 1-7/8" x OD 2-5/16". Made in the USA! Replaces GM# 1523096, 5590039, AC FG-3
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 Chevrolet Cars and Trucks
This is a Thick Valve Cover Gasket for 1937-1953 Chevrolet cars & trucks with 216 or 235 CID 6-cylinder engines. The gasket is 1/4" Thick. Dimensions: 27-1/8" Long x 5-9/16" Wide. Inside Dimensions: ID Length: 25-5/8" x ID Width: 4-1/4". Made in the USA! Replaces GM# 3694248
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars
This U-joint gasket set fits 1929-1954 Chevrolet & GMC cars & trucks. For 1933-36 Standard models order G-6043 transmission gasket set, which includes the U-joint gaskets. For 1950-1954 Powerglide models order FS-125P. Bolt Centers on collar gaskets are 3-3/4". Made in the USA! Replaces GM# 3723490, 3699727, 348259
Specific Applications:
1941-1953 Passenger, 1/2 & 3/4 Ton (exc 1941-1942 3/4 Ton, Powerglide);
This seal set replaces all the seals and shims required to keep gear oil inside, where it is needed.(Note: early models 1929-1933 without a screw-on flange at the rear of ball housing, will require a FS-4356 O-ring seal in addition to this kit).
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
A leaky U-joint housing is a very common problem with the enclosed drive line vehicles. This seal set replaces all the seals and shims required to keep gear oil inside, where it is needed. This U-joint gasket set fits all 1950-1954 Chevrolet cars as well as 1954 1/2 trucks with Power Glide or Hydramatic Transmissions and closed drive lines. Flange gasket has 4-1/2" ID with 6-holes. Made in the USA! Replaces GM# 348259, 3692836, 348259
Specific Applications:
1954 1/2 Ton Truck with Auto Transmission
This Rear Axle Cover Gasket fits 1937-1954 Chevrolet passenger cars. Made in the USA! Replaces GM# 593017
Specific Applications:1937-1954 Chevrolet Passenger Cars
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This rear axle carrier gasket fits 1937-1954 Chevrolet passenger cars. This is a paper gasket that fits in FRONT of the differential housing and mates to the torque tube assembly. Made in the USA! Replaces GM# 593012
Specific Applications:1937-1954 All Passenger Cars
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
This is a Complete Engine Overhaul Gasket Set for 1937-1953 Chevrolet 216 CID engines. It also fits 1941-1950 Chevrolet 235 CID truck engines. This high quality set comes with a COPPER Head Gasket and includes rope rear main seal and all gaskets for a complete engine overhaul. Made in the USA! Replaces GM# 3702872
NOTE: 1950-1952 Canadian production 216CID engines were based on the 235CID engine with short side cover. If you have an export model in Australia, New Zealand or Canada, this gasket set will not work for your 216 engine. Use RS-534C.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a MAGNETIC Oil Pan Plug for all 1929-1972 Chevrolet & GMC cars & trucks. Thread is 1/2-20, Length under head is 43/64". It comes with nylon gasket.
This Pushrod Cover Gasket Set fits all 1937-1953 Chevrolet 216CID engines. It also fits 1941-1949 Chevrolet 235CID truck engines. It includes G-1016 spark plug gaskets. Dimensions: 9-7/16" x 26-7/8". Made in the USA! Replaces GM# 602336, 838210
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
This is a Rubber Windshield Seal for 1964-1966 Chevrolet & GMC trucks WITH Reveal Molding. The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped. Replaces GM# 3794942
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
This 3-piece Intake & Exhaust Manifold Gasket Set fits all 1937-1953 Chevrolet car & trucks with 216 CID engines. It also fits 1941-1949 Chevrolet trucks with 235 CID engines. Made in the USA! Replaces GM#620483.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This fuel tank sender gasket fits all 1931 (late) - 1966 Chevrolet & GMC cars & trucks with screw mounted sender. Dimensions: 1-9/16" ID x 2-9/16" OD. Made in the USA! Replaces GM# 1516061
1930 & 1931 OWNERS NOTE:In 1931, there was an early and a late version of the sending unit. This is for the late models. For larger gasket that was used on early cars, order FS-504 gasket.
This fuel tank sender gasket kit fits all 1931 (late) - 1966 Chevrolet & GMC cars & trucks with screw mounted sender. The gasket is a cork & rubber composition material. Gasket Dimensions: 1-9/16" ID x 2-9/16" OD. Kit comes with gasket, 5 screws and lock washers. Replaces GM# 1516061
1930 & 1931 OWNERS NOTE:In 1931, there was an early and a late version of the sending unit. This is for the late models. For larger gasket that was used on early cars, order FS-504 gasket.
This is an Oil Pan Plug for all 1929-1972 Chevrolet & GMC cars & trucks. Thread is 1/2-20, Length under head is 1/2". It comes with nylon gasket. Replaces GM# 839079, 344690
This is a Differential Fill Plug Gasket for all 1925-1963 Chevrolet & GMC cars & trucks. Dimensions: ID = 1" x OD = 1-3/8". Made in the USA! Replaces GM# 344830
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
The windshield channels are vulcanized one-piece units. When listed as "no reveal" or "reveal" models - this indicates whether the vehicle originally came with chrome molding around the windshield gasket. We do not supply the chrome molding. You must reuse your originals if so equipped.
This is the Intake to Exhaust Manifold Gasket for 1950-1962 Chevrolet cars & trucks with 235 & 261 CID engines. The gasket is rectangular with bolt centers: 2-5/8" x 2-1/8"; Overall: 3-1/2" x 4-1/2". Replaces GM# 3835572
For 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars
This is a Thick Valve Cover Gasket for 1939-1962 GMC trucks with 6-cylinder engines. The gasket is 1/4" Thick. Dimensions: 28-3/8" Long x 5-5/8" Wide. Inside Dimensions: ID Length: 26-3/4" x ID Width: 4-1/4". Made in the USA! Replaces GM# 6107400
This is a Thick Valve Cover Gasket for 1954-1962 Chevrolet cars & trucks with 235 & 261 CID 6-cylinder engines. The gasket is 1/4" Thick with four mounting holes. Dimensions: 27" Long x 5-5/8" Wide. Made in the USA! Replaces GM# 3708648, 3708646
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars
This is an INTAKE & EXHAUST manifold gasket set for 1939-1962 GMC Inline Six Cylinder Engines (except 1950-1954 270 CID). This four piece set comes with three pieces for intake & exhaust manifolds to the cylinder head and also the gasket between the intake & exhaust manifolds. Replaces GM# 2087384
This is a Thick Valve Cover Gasket for 1929-1934 Chevrolet cars & trucks with 6-cylinder engines. The gasket is 1/4" Thick. Dimensions: 25-5/8" Long x 5-1/8" Wide. Made in the USA! Replaces GM# 600120
Specific Applications:
1934 Standard Passenger
For 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
