This is a Cork Headlight Seal for 1931-1939 Chevrolet & GMC cars & trucks. Cork strip is 3/16" X 29" and designed to press into the outer edge of the headlamp reflector. Replaces GM# 913692, 915291, 915988, 918677, 920771, 920603
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars and Trucks
In 1955, used on 2nd Series only. The windshield channels are vulcanized one-piece units.
We do not supply the chrome molding.You must reuse your originals if so equipped.
This carburetor bowl gasket fits 1925-1931 Chevrolet cars & trucks with original Carter updraft carburetors. For Carter carburetor models: RXO, RAJX-O, RAKX-O, RJH-08. Replaces GM# 342134
Specific Applications:1925-1931 Chevrolet cars & trucks - Models: Superior, Utility, Capitol, National, Universal, International, Independence.
For 1925 1926 1927 1928 1929 1930 1931 Chevrolet Cars and Trucks
This is a pair of reproduction Wiper Transmissions (Left & Right) for all 1941-1948 Chevrolet passenger cars, including Sedan Delivery (exc. Station Wagon). These beautifully chromed wiper transmissions come with the linkages attached, ready to install. This is a replacement for 1941 models without rubber bushings. This set has rubber bushings. They include mounting brackets and gaskets. Right side has the long arm and left side a short arm. Replaces GM# 4114813, 4111814, 4125219, 4132644, 4132645
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
This is a Complete Engine Overhaul Gasket Set for 1954-1962 Chevrolet 261 CID engines. Gasket set comes with all necessary gaskets for overhauling this engine. Rear main seal is a rope seal. Made by Best Gasket Co. in the USA! Replaces GM# 3702872, 3752756, 3836107
For 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a complete engine overhaul gasket set for 1958-1965 Chevrolet 348 CID engines. Set includes all gaskets for a complete engine overhaul. Made by Best Gasket Co. in the USA! Replaces GM# 3998212
For 1958 1959 1960 1961 1962 1963 1964 1965 Chevrolet Cars and Trucks
This is a complete engine overhaul gasket set for 1961-1965 Chevrolet 409 CID engines, except high performance models. Set includes all gaskets for a complete engine overhaul. Made in the USA by Best Gasket Co. Replaces GM# 3998212
For 1961 1962 1963 1964 1965 Chevrolet Cars and Trucks
This is a Exterior Door Handle Mounting Gasket Set for 1973-1987 Chevrolet & GMC trucks including CK 1, 2, 3, Blazer & Jimmy. It also fits 1973-1991 Crew Cab & Suburban. Replaces GM# 6258561, 6258562
This is a windshield wiper arm for 1949-1955 Chevrolet & GMC cars & trucks. Specify Left or Right when ordering Replaces GM# 3703494
Specific Applications:
1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This is a windshield wiper arm for 1949-1955 Chevrolet & GMC cars & trucks. Specify Left or Right when ordering Replaces GM# 3703494
Specific Applications:
1954-1955 (1st Series) Chevy & GMC Trucks
For 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
This oil pan gasket set fits all 1955 (2nd Series) Chevrolet car & truck 6-cylinder engines - 235 & 261 CID. Made in the USA by Best Gasket Co. Replaces GM# 3714551
For 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars
This blade will work with the GR-94SR, VT-64 and VT-65 wiper arms. This blade is an updated version for the 1937-40's that will give better performance for street rod use.
This kit completely replaces the factory type "spool & cable" wiper system.
Cross-mount master cylinders will not fit with our RainGear system installed.
The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
This kit completely replaces the factory type "spool & cable" wiper system.
Cross-mount master cylinders will not fit with our RainGear system installed.
The kit comes complete less assembly lube, arms and blades, escutcheons and model-specific knobs for the switch. All those stock pieces will fit on our system. Escutcheons are the exterior trim bezels which cover the pivot posts in the cowl. Note that the original escutcheons are required and are not available as an aftermarket item to the best of our knowledge.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-31D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-31. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-32D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory type "spool & cable" wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch.Designed to fit neatly under the dash. For those that want to maintain original appearance, the original motor can be left in place in the engine compartment. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch- see PA-32. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
In 1955, used on 1st Series only. DO NOT USE WITH IN-DASH RADIO. This kit completely replaces the factory vacuum wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash.
Original radios in the upper dash board mount location will not clear our system. We have one report of an aftermarket radio interfering as well.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
In 1955, used on 1st Series only. DO NOT USE WITH IN-DASH RADIO. This kit completely replaces the factory vacuum wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions,wiring and switch. Designed to fit neatly under the dash.
Original radios in the upper dash board mount location will not clear our system. We have one report of an aftermarket radio interfering as well.
Please note that the RainGear unit cannot be controlled by any General Motors column-mounted wiper switches. You must use the included switch. This is due to the fact that GM switches control the wiper motor via the ground wire and our systems must be controlled by switching the positive wire.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
In 1955, used on 2nd Series only. This kit completely replaces the factory wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. Order this kit if you want standard two-speed wiper operation. Also available is the same kit with wiper delay switch - see PA-34D. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
In 1955, used on 2nd Series only. This kit completely replaces the factory wiper system. It comes with a 12 volt, ten amp, two-speed electric motor. Complete with bracketing, linkage arms, wiper transmissions, wiring and switch. Designed to fit neatly under the dash. Order this kit if you want wiper delayed, two-speed wiper operation. Also available is the same kit without wiper delay switch - see PA-34. Use with your original wiper arms, blades & chrome trim. A top quality product Made in the USA!
This kit completely replaces the factory wiper system. It comes with a 12 volt, two-speed electric motor.
Designed to fit in the stock location above the windshield. Also available is a wiper delay switch - see PA-10.A top quality product Made in the USA!
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a complete engine overhaul gasket set for 1961-1965 Chevrolet 409 CID engines, high performance models ONLY. Set includes all gaskets for a complete engine overhaul. Made in the USA by Best Gasket Co.
This is a Windshield Wiper Arm for 1935-1936 Chevrolet Passenger cars. Arm is stainless steel and comes with tensioning cap. Overall length of arm is 6 inches. Replaces GM# 378506
Specific Applications:
1936 All Passenger Cars
This is a backup light lens gasket for all 1960-1966 Chevrolet & GMC trucks with backup light option. Sold in a pair for both sides, this replaces GM# 6942304
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This wiper motor transmission set fits VACUUM & ELECTRIC wiper motors in 1955-1959 Chevrolet and GMC trucks. The set includes the links and pivots from the wiper motor to the splined output shafts that the wiper arms attach to. In 1955, fits 2nd Series only. Fits left and right. Replaces GM# 3730483, 3722488
Specific Applications:
1958-1959 Trucks - Vacuum ONLY
This is a Transmission Overhaul Gasket Set for 1933-1936 Chevrolet Standard passenger cars with 3-speed transmissions. Gasket set includes U-joint ball gaskets. Made in the USA!
This is a backup light lens gasket for all 1967-1972 Chevrolet & GMC Panel & Suburban trucks with backup light option. Sold in a pair for both sides, this replaces GM# 3905247
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Rear Axle Bearing Retainer Gasket for 1925-1929 Chevrolet passenger cars & 1/2 Ton Trucks. 4-Bolt pattern. Two gaskets required per vehicle. Series K, V, AA, AB. Replaces GM# 344042
For 1925 1926 1927 1928 1929 Chevrolet Cars and Trucks
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
For 1963 1964 1965 1966 1967 1968 Chevrolet Trucks
This is a new wiper motor for 1963-1972 Chevrolet & GMC trucks. This motor is a 2-speed with 3-Terminals. Replaces GM# 4911476, 22048237
Specific Applications:
1967-1972 Series 10-30 Trucks, including Suburban & Blazer;1964-1991 G-10-20 Van
For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a new wiper motor for 1963-1972 Chevrolet & GMC trucks. This motor is a 2-speed with 4-Terminals. Replaces GM #4911476, 22048237
Specific Applications:
1967-1972 Series 10-30 Trucks, including Suburban & Blazer;1964-1991 G-10-20 Van
For 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
For 1978 1979 1980 1981 1982 1983 1984 Chevrolet Trucks
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
Note: rebuilt motors are sold on an exchange only basis. If no rebuildable core is exchanged add $45.00 core charge. This part is remanufactured and we must have your rebuildable part (core) as an exchange. You will be charged a core charge that will be refunded upon our receipt of your rebuildable core.
This is a universal 6-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 12-VOLT Windshield Wiper Motor with Black Housing - BUILT-IN ON/OFF SWITCH.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. NOTE: This motor will not work on GM vehicles with crank up windshields unless the crank mechanism is permanently removed.
The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep
For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
THE SHAFT IS 5" LONG AND INCLUDES INSTRUCTIONS FOR SHORTENING THE SHAFT. THIS WIPER MOTOR HAS AN AUTOMATIC SELF PARK AND A 110 DEGREE SWEEP. USE WITH WIPER ARMS VT-60, VT-61, VT-64, OR VT-65 AND WIPER BLADES VT-62, VT-63, VT-66, AF-341SR, OR VT-67.
This is a universal 6-VOLT Windshield Wiper Motor with Stainless Housing - NO SWITCH. This motor requires an external control switch to operate. The kit comes with an adjustable length SLOTTED Adjustable Wiper Arm that is 7-1/4" to 8-1/2" long from the pivot attachment. Slot Style Wiper blade included in the kit is 8" long.
The shaft is 5" long and the kit includes instructions for shortening the shaft. The wiper motor has an automatic self-parking feature and a 110 degree sweep
For replacement Slot Type Wiper Arms see: VT-60 (adjustable 6"-8"); VT-61 (adjustable 8"-12"). Slot Type Wiper Blades see: VT-62 8" Blade; VT-63 11" Blade.
For replacement J-Hook Type Wiper Arms see: VT-64 (adjustable 6"-8"); VT-65 (adjustable 8"-12"). J-Hook Type Wiper Blades see: VT-66 6" Blade; VT-67 10" Blade; AF-341SR 8-1/4".
This is a Universal 12-Volt Wiper Motor with Stainless Housing. Motor comes with wiper arm and blade. The shaft is 5" long and includes instructions for shortening the shaft. This wiper motor has an automatic self park and a 110 degree sweep. Motor overall depth is 3-1/4". For replacement wiper arms see VT-60, VT-61, VT-64 or VT-65. Replacement wiper blades see VT-62, VT-63, VT-66, AF-341SR or VT-67. NOTE: WILL NOT WORK ON EARLY GM VEHICLES WITH CRANK-UP WINDSHIELDS.
This is the 1947-53 pickup wiper motor transmissions & linkage arms for left and right side. These are the linkage from wiper motor to the transmissions that stick trough the cowl. Replaces GM# 3697281, 3697282
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This universal wiper arm is polished stainless steel with an adjustable range of 6" to 8" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
This universal wiper arm is polished stainless steel with an adjustable range of 8" to 12" long. They have a "J" Hook end to accept wiper blades made especially for this type of hook. It clamps onto a 1/4" shaft and works with the following wiper motors: VT-6VSS, VT-12VSS, VT-6VK AND VT-12VK. This arm is designed for use with VT-66 or VT-67 wiper blades with "J" Hook opening.
1931-1932 Front Bow Seal Weatherstrip, windshield header-to-front-roof rail. Fine grain sponge rubber. A replacement seal, requires minor trimming to install. Replaces #4009225.
Styles 568 and 571.
These wiper savers are a chrome bullet that fits over the wiper transmission splines for displaying at car shows. Sold in pairs, they have a set screw to hold them in place. Approximate Height 1.5"
Copper consists of two outer sheets of a generously thick .010" copper and a low-density graphite "filler" sheet. This high-quality graphite sheet is superior to asbestos, which was used in the old days, and far superior to the non-asbestos materials found in other manufacturers' modern copper head gaskets. Excellent torque retention is achieved by using superior materials.
Copper consists of two outer sheets of a generously thick .010" copper and a low-density graphite "filler" sheet. This high-quality graphite sheet is superior to asbestos, which was used in the old days, and far superior to the non-asbestos materials found in other manufacturers' modern copper head gaskets. Excellent torque retention is achieved by using superior materials.
This copper head gasket fits all 1937-1953 Chevrolet 216CID engines. It also fits 1941-1949 Chevrolet 235CID truck engines. Copper consists of two outer sheets of a generously thick .010" copper and a low-density graphite filler sheet. This high-quality graphite sheet is superior to asbestos, which was used in the old days, and far superior to the non-asbestos materials found in other manufacturers' modern copper head gaskets. Excellent torque retention is achieved by using superior materials. Replaces GM# 839541, 3835645
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This is a Graph Tite head gasket for 1939-1962 GMC six-cylinder truck engines. Fits 228, 236, 248 & 270 CID. Replaces GM# 2135866, 2137758
GraphTite consists of Kevlar reinforced graphite facing material mechanically bonded to both sides of a perforated steel core. This modern engineered, high-performance material is rated to a temperature of 1400 degrees-F. Steel fire rings are installed in the combustion chamber areas of the gasket. GraphTite head gaskets have superb sealing characteristics, excellent torque retention, and hold up to the punishment dished out by high-performance engines ñ high quality all the way. Install GraphTite head gaskets using whatever sealant methods have proven to work well for you over the years. Some engine builders use a spray-on sealant like Copper Coat. Others prefer no spray-on sealant, but use a thin bead of silicone sealant around each water and oil hole.
This is a copper head gasket for all 1950-1952 Chevrolet 235 CID engines. These gaskets are NORS (New Old Replacement Stock) and are available in limited quantities - Subject to Stock on Hand. Replaces GM# 3835562.
NOTE: This gasket was used on Canadian manufactured 216 CID engines in these years. Compare to your original gasket to determine the gasket required.
This COPER Head Gasket fits all 1953-1962 Chevrolet 235CID engines. Copper consists of two outer sheets of a generously thick .010" copper and a low-density graphite filler sheet. This high-quality graphite sheet is superior to asbestos, which was used in the old days, and far superior to the non-asbestos materials found in other manufacturers' modern copper head gaskets. Excellent torque retention is achieved by using superior materials. Made in the USA! Replaces GM# 3709428, 3701296
For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a composite head gasket for 1954-1962 Chevrolet 261CID engines. This head gasket is made by Best Gasket in the USA! Replaces GM# 3836107, 3709429
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Trucks
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
FITS 1934 MASTER AND ALL EARLY 1935 MODELS.
HEAD GASKET FOR THIS HEAD HAS TWO 13/16" ID HOLES IN THE CENTER.CHECK AGAINST ORIGINAL!
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
FITS 1935 (LATE) AND ALL 1936 MODELS.
HEAD GASKET FOR THIS HEAD HAS TWO 1-5/16" ID HOLES IN THE CENTER.CHECK AGAINST ORIGINAL!
Our high quality gasket sets are made in the USA by Best Gasket Company. This set is a valve grind set for all 1937-1953 Chevrolet 216CID engines. It also fits 1941-1949 Chevrolet 235CID truck engines. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket. Made in the USA!
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a GRAPH TITE head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
This is a Valve Grind Gasket Set for 1950-1952 Chevrolet 235 CID engines. Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket. Replaces GM# 3707038
NOTE: This gasket set was also used on Canadian manufactured 216 CID engines in these years. Canada also manufactured Chevrolet cars & trucks for overseas export with these engines. Compare your head gasket to be certain which gasket set is required.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COPPER head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
Our high quality gasket sets are made in the USA by Best Gasket Company. These sets feature a COMPOSITE head gasket and thick valve cover gasket. Set includes Head Gasket, Valve Cover Gasket, Pushrod Cover Gasket Set, Intake & Exhaust Manifold Gasket Set, and Thermostat Housing Gasket.
For 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is the 1960-66 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
In 1955, fits 1st Series only. This high quality electric replacement is a direct bolt - in for your original vacuum motor. A big improvement over the motors that were previously available - this motor is a 2-speed heavy duty motor. It also has an automatic park position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! Complete with wiring harness. Note: If you are using original wiper transmission linkage with this motor, you must remove the bushing in the end of the transmission linkage and use the nylon bushings included with the wiper motor kit.
This high quality electric replacement is a direct bolt - in for your original vacuum motor. A big improvement over the motors that were previously available - this motor is a 2-speed heavy duty motor. It also has an automatic park position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! Complete with wiring harness. Note: If you are missing the original clip that holds the wiper transmission arms to the motor, order either the GR-87 or GR-87A separately,as this is not included in the motor kit.