This is the 1967-72 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
**THERE ARE 2 DIFFERENT MOTORS FOR THIS SERIES OF TRUCK, ONE MOTOR LAYS FLAT ON THE FIREWALL (PA-26F) AND THE OTHER STICKS OUT TOWARDS THE SEAT(PA-26). This high quality electric wiper motor is made in the USA by Newport Engineering.It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
This high quality electric wiper motor is made in the USA by Newport Engineering. It is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position and uses the original wiper linkages and transmissions. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This is a Graph Tite head gasket for 1951-1959 GMC 302CID six-cylinder truck engines.
GraphTite consists of Kevlar reinforced graphite facing material mechanically bonded to both sides of a perforated steel core. This modern engineered, high-performance material is rated to a temperature of 1400 degrees-F. Steel fire rings are installed in the combustion chamber areas of the gasket. GraphTite head gaskets have superb sealing characteristics, excellent torque retention, and hold up to the punishment dished out by high-performance engines ñ high quality all the way. Install GraphTite head gaskets using whatever sealant methods have proven to work well for you over the years. Some engine builders use a spray-on sealant like Copper Coat. Others prefer no spray-on sealant, but use a thin bead of silicone sealant around each water and oil hole.
This is an intake & exhaust manifold gasket set for 1950-1959 GMC truck engines with 270 & 302 CID engines.
Specific Applications:
1951-1959 GMC 302 CID
This is a complete overhaul gasket set for 1951-1959 GMC 302 CID engines. This set has a Graph Tite head gasket.
GraphTite consists of Kevlar reinforced graphite facing material mechanically bonded to both sides of a perforated steel core. This modern engineered, high-performance material is rated to a temperature of 1400 degrees-F. Steel fire rings are installed in the combustion chamber areas of the gasket. GraphTite head gaskets have superb sealing characteristics, excellent torque retention, and hold up to the punishment dished out by high-performance engines ñ high quality all the way. Install GraphTite head gaskets using whatever sealant methods have proven to work well for you over the years. Some engine builders use a spray-on sealant like Copper Coat. Others prefer no spray-on sealant, but use a thin bead of silicone sealant around each water and oil hole.
This exhaust flange gasket will fit 1950-1962 Chevrolet Six Cylinder engines with 2" ID exhaust header. The gasket is flat. This gasket is also used with Fenton Headers (2 required for Fenton, 1 required for stock applications). 2" ID. Replaces GM# 3692831
Specific Applications:
1950-1955 (1st Series) Trucks with 6-Cylinder Engine;
1937-1962 with Fenton Header Modification - 2 gaskets required
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is the 1954-55 1st Series pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl. Overall length is 27-1/2" long.
This item came from a large collection of New Old Stock (NOS) items purchased recently from a Chevrolet Dealership in California. These parts have not been offered for sale in the last 35 years. As you view our online catalog you will see many of these items listed for sale. Each item is unique and we cannot get more of them. These are new GM factory original parts - not reproductions.
It is in pristine condition and ready to install. Original torn up envelope included. Only ONE available-first come, first serve! GM# 3703856
It's here! Finally a true bolt-in replacement for your 1960 Chevrolet Cars. The Clean Wipe Wiper Drive for the 60 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for that big block or after-market ignition system. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware. It can also be easily upgraded to full intermittent delay wipers.
It's here! Finally a true bolt-in replacement for your 1961-62 Chevrolet Cars. The Clean Wipe Wiper Drive for the 61-62 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for that big block or after-market ignition system. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with all the mounting hardware. It can also be easily upgraded to full intermittent delay wipers.
It's here! Finally a true bolt-in replacement for your 1963-64 Chevy Impala, Bel-Air, and Biscayne. The Clean Wiper Wiper Drive for the 63-64 Chevy is a high tech motor replacement for the O.E.M. electric motor. We use an extremely heavy duty factory tested 2-speed motor that is smaller than the original, giving you more room for a power brake booster or almost any after-market part. The kit mounts in the factory mounting position, hooks up to the original linkage and transmissions, and comes with a 2-speed rotary switch and all the mounting hardware. It can be easily upgraded to full intermittent delay wipers with the addition of our Intermittent Delay Switch.
This is a fuel pump valve & gasket kit for 1937-1962 Chevrolet & GMC cars & trucks. It includes two each of the fuel pump valves and two each of the gaskets to install the valves. The valves are 3/4" OD x 3/8" High. These valves are part of our rebuild kits but offered here in case you need them separately.
Note: This kit can be used on 1929-1936 Chevrolet engines that have replacement fuel pumps. Compare dimensions and design before ordering.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks
This is a water pump to block mounting gasket for 1955-1962 Chevrolet cars & trucks 6-cylinder engines - 235 & 261 CID. Dimensions: 3-13/16" ID with 5 holes. Replaces GM# 3836162
This is a Sponge Cowl Vent Seal for 1939-1946 Chevrolet & GMC trucks. An economical replacement for the original molded rubber seal. Dimensions: 3-15/16" x 14-15/16". Replaces GM# 598925, 3681067
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
This is a Sponge Cowl Vent Seal for 1954-1955 (1st Series) Chevrolet & GMC trucks. An economical replacement for the original molded rubber seal. Replaces GM# 3703560
This is the 1960-66 pickup wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick trough the cowl.
This is the 1964 Passenger wiper motor transmissions for left and right side. Has linkage from wiper motor to the transmissions that stick through the cowl.
This is the small gasket inside the oil distributor valve seat for all 1935-1953 Chevrolet cars & trucks. Dimensions: OD 15/16" x ID 13/16". Replaces GM# 837637, 839173
For 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This windshield wiper blade assembly is 16 inches long, polished stainless steel with rubber insert. Fits 1973-1987 Chevrolet & GMC trucks with straight tip wiper arms. Replaces GM# 9825369, 600162
For 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
NOTE: 1936 fits Low Roof Cabs ONLY.
Complete with bracketing, linkage arms, wiper transmissions, wiper arms & blades, wiring and switch.
A top quality product Made in the USA!
1932-1935 Roadster & Phaeton Windshield Header Seal (May fit 1931 also)Fine grain sponge rubber. A replacement seal, this is sold by the foot. Fits Roadster & Phaeton convertible tops only.
This high quality electric wiper motor fits all 1947-1953 Chevrolet trucks. Made in the USA by Newport Engineering, it is a direct bolt-in replacement for your original vacuum motor. This unit has a 2-speed heavy duty motor. It also has an automatic "park" position. Can be installed in less than an hour! The kit comes complete with wiring harness and switch.
Motor mounts in stock location under the dash using stock linkage and transmissions. This unit WILL clear the stock CHOKE CABLE. The two speed switch provided will mount in stock location but the purchaser must adapt stock knob. *The delay switch will not mount in the stock location.
For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks
This Oil Pan Gasket Set fits all 1935-1938 GMC with Pontiac 6-cylinder 222 & 233 CID engines. This 4 piece set also fits 1935-1954 Pontiac 6 cylinder 222 & 239 CID engines.
This 3 piece manifold gasket set fits 1935-1938 GMC 223 CID and 233 CID 6 cylinder engines. This set also fits 1935-1954 Pontiac 6 cylinder 222 and 239 engines.
These windshield wiper transmission brackets fit behind the wiper transmission on 1937 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4073726
These windshield wiper transmission brackets fit behind the wiper transmission on 1938-1939 Chevrolet passenger cars. This set includes two brackets, two bolts and two star washers. Replaces GM# 4081917
Windshield Stick
This stick is made from durable nylon 66 which is ROUNDED on BOTH ends and has the PRP logo one side. A very useful tool to help with the installation of glass weatherstrip.
This Universal Joint Gasket set fits 1937-1954 GMC 1/2 ton, long bed trucks only. Specific gasket set for the short driveshaft section that was used on the long bed 1/2 ton trucks.
This is a Fuel Pump Plate Mounting Gasket for 1955-1964 Chevrolet passenger cars & trucks with 8-cylinder engine. 4 attaching holes. Replaces GM# 3705044
This original reproduction windshield wiper switch fits 1955-1956 Chevrolet passenger vehicles. This switch comes complete with a new stainless steel cable and sheath and can operate both electric and vacuum wiper motors. The body of this switch has a --3/16" overall depth.
NOTE: This switch is not compatible with the original 1955 accessory windshield washer kit.
This Wiper Tower Bezel Kit fits 1960 Chevrolet passenger vehicles. This 4 piece kit includes the 2 chrome wiper transmission bezels as well as 2 chrome bezel nuts.
This Raingear Wiper System fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit including a wiper delay switch, see PA-37D. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This Raingear Wiper System WITH WIPER DELAY SWITCH fits 1967-1972 Chevrolet pickups. This kit mounts inside of the airbox, which is located beneath the cowl panel on the outside of the truck, below the windshield. The relocation of this kit to the airbox from the original position under the dash frees up space under the dash to accommodate a computer when doing an LS swap. This kit features a 12 volt, ten amp, two-speed electric motor and comes complete to work with your original wiper arms, blades, switch bezel and switch knob. NOTE: When installing this kit you will need to install a passenger side defroster duct, on the driver side to allow room for the new switch and wiring. For a kit without a wiper delay switch, see PA-37. Made in the USA!
For 1967 1968 1969 1970 1971 1972 Chevrolet Trucks
This GRAPHITE Head Gasket fits all 1937-1953 Chevrolet 216CID engines. It also fits 1941-1949 Chevrolet 235CID truck engines. GraphTite MBG is a high performance gasket material combining expanded graphite facings on 0.2mm (0.008?) tang perforated tin-plated steel core. It is ideally suited for internal combustion engine applications such as head gaskets. MBG is compressible and resilient, yet offers excellent bolt torque retention, excellent chemical resistance, and is heat resistant for exhaust gas sealing applications up to 550°C (1000°F) or higher when shielded.
GraphTite head gaskets have superb sealing characteristics and hold up to the punishment dished out by high-performance engines high quality all the way. This gasket might be overkill for cruiser engines, but so what . . extra performance never hurts!
Install GraphTite head gaskets using using a spray-on sealant like K & W Copper Coat or Permatex Copper Spray-A-Gasket. Always re-torque, no short-cuts.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks
This GRAPHITE head gasket fits all 1953-1962 Chevrolet 235CID engines. GraphTite MBG is a high performance gasket material combining expanded graphite facings on 0.2mm (0.008?) tang perforated tin-plated steel core. It is ideally suited for internal combustion engine applications such as head gaskets. MBG is compressible and resilient, yet offers excellent bolt torque retention, excellent chemical resistance, and is heat resistant for exhaust gas sealing applications up to 550°C (1000°F) or higher when shielded.
GraphTite head gaskets have superb sealing characteristics and hold up to the punishment dished out by high-performance engines high quality all the way. This gasket might be overkill for cruiser engines, but so what . . extra performance never hurts!
Install GraphTite head gaskets using using a spray-on sealant like K & W Copper Coat or Permatex Copper Spray-A-Gasket. Always re-torque, no short-cuts. Made in the USA! Replaces GM# 3709428, 3701296
For 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks