1290 Items Found
Showing 301 thru 400
Showing 301 thru 400
Horn Buttons
1941-48 Chevrolet Passenger Car. Series AH, BH, DK, EK, and FK use 2 sets, all others use 1 set
Series AH - BH - BK - EK - FK (Special Deluxe - Fleetmaster - Fleetline).
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Mounting Pads
This is a tail light mounting pad for 1947-1956 Chevrolet & GMC panel trucks & Suburbans for the light on the left door. Dimensions: 4" x 5-1/2". A beautiful reproduction made by Steele Rubber in the USA! Replaces GM# 3676259
For 1947 1948 1949 1950 Chevrolet Trucks
Vent Post Seal
1941-1952 Passenger Vent Window Vertical Seals with metal core, as original.
Vent window division bar seals are the vertical sealing surface that is attached to the division post. These seals have a metal core with attaching tabs just like the originals.
Specific Applications:
1949-1952 Passenger Models (exc. Convertible or Hardtop)
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars
Mounting Pads
2-1/2" X 3-5/8" overall. 1 or 2 per car. Series GA GB HA JA JB. For flat-back coach sedan with rear mounted spare only. Replaces #594970.
For 1937 1938 1939 Chevrolet Cars
Back Window Seals
This is a one-piece molded Back Window weather-strip channel for 1939-1942 Chevrolet and GMC trucks WITH Die Cast Retainer. NOTE: in 1942 this seal is used on early models only. ALL MODELS EXCEPT PANEL & SUBURBAN This seal comes molded with holes to fit your original die cast retainer. Dimensions: 10-1/2" Wide x 28-1/2" Long, Overall length 65-5/8". Replaces GM# 599071 Made in the USA!
For 1939 1940 1941 1942 Chevrolet Trucks
Rear Window Weatherstrip
Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.FITS ALL MODELS WITH RUBBER LIP THAT HOLDS HEADLINER IN PLACE AND NO INSIDE GARNISH MOLDING.
For 1959 1960 Chevrolet Cars
Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1959 1960 Chevrolet Cars
Back Window Seals
Vulcanized rear window weatherstrip.PANEL Truck ONLY.
For 1934 1935 1936 1937 1938 Chevrolet Trucks
Rumble Seat Step Pad
1933-35: One fender step pad per vehicle
For 1933 1934 1935 Chevrolet Cars
Vent Post Seal
1939-40 All models except convertible
For 1939 1940 Chevrolet Cars
Trunk Weatherstrip
1949-54 Weatherstrip, deck lid in gutter. Molded wide corners to use with B-161
each leg approx. 5-3/4 long. All passenger models.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Door Weatherstrip
1949-52 Weatherstrip. Front door hinge pillar at belt line.
All models except convertible and Bel Air.
For 1949 1950 1951 1952 Chevrolet Cars
Hood Corner Pads
1934 Pads, hood front covers. Replaces #373689-90 right and left.
to hood. Series DA (Master) only.
For 1934 Chevrolet Cars
Horn Buttons
1940 Cushion, horn blowing ring. Replaces #753656. Exact copy.Model KA (Special Deluxe) only.
For 1940 Chevrolet Cars
Convertible Top Seals
1958 Close cell sponge w/clips. Two ea.38 long. Impala except convertible
For 1958 Chevrolet Cars
Deck Lid Handle Ferrule
1942-48 Ferrule, deck lid handle and license light body with rubber sleeve.All passenger models except Sedan Delivery and Station Wagon
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Rear Window Weatherstrip
1963-64 Impala sport sedan only.Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1963 1964 Chevrolet Cars
1959 w/out inside garnish molding, 1960 Bel-Air sport coupe. Style #1637. Rear window sealReady to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1959 1960 Chevrolet Cars
Vent Post Seal
1955-57 All except convertible and hardtop.Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1955 1956 1957 Chevrolet Cars
Hood Corner Pads
1934-35 Pads, hood rear corners. Replaces
With metal tabs for securing to hood.
1935: Ser. EC (Standard)
For 1934 1935 Chevrolet Cars
Vent Post Seal
1958 2-door and 4-door sedans. Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 Chevrolet Cars
Lock Pillar Seals
1958 Quarter window at top of lock post on body. R. & L. with steel core. Impala
For 1958 Chevrolet Cars
Mounting Pads
1935 Pad, bracket mounting to body for
for Master Deluxe Town Sedan and Sport Coupe.
For 1935 Chevrolet Cars
Convertible Top Seals
1959-60 Impala Front bow and roof rail with metal core and studs.
For 1959 1960 Chevrolet Cars
Rear Window Weatherstrip
1959-60 Wrap around rear window sealReady to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1959 1960 Chevrolet Cars
1959-60 El Camino only.Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1959 1960 Chevrolet Cars
Mounting Pads
1933 car Bracket at fender.
See also our # 60-178. 2-1/8 x 3-7/16
For Chevrolet Cars and Trucks
Rear Window Weatherstrip
1962-64 Impala sport coupeReady to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1962 1963 1964 Chevrolet Cars
Spring Bumpers
1926-31 Bumper, front spring to frame. For all 1-1/2 ton trucks. Two (2) required per vehicle
For 1926 1927 1928 1929 1930 1931 Chevrolet Trucks
Steering Column Seals
Replaces #356607 for all models.
For 1929 1930 1931 1932 Chevrolet Cars and Trucks
Belt Line Weatherstrip
1936-46 pickup lower scraper 3/4 wide strips
For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
Grommets
1942-48 Grommet or nipple, parking light wire
#5933167. For all passenger automobiles.
For 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Vent Post Seal
1941-48 All closed models including Sedan Delivery. Except 1007, 1067Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Lock Pillar Seals
1956-57 Rear quarter window, front lower corner.
Replaces #46449432-3. For sport coupe.
For 1955 1956 1957 Chevrolet Cars
1961-64 Rear quarter window, front door upper corner. R. & L. w/metal core as original. For convertibles
For 1961 1962 1963 1964 Chevrolet Cars
Back Window Seals
1939-46 Vulcanized back window seal. PANEL& SUBURBAN with doors.
For 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
Clutch Brake Pedal Bumper
1937-46 Bumper, clutch or brake pedal to floorboard. Longer type with 1-3/8 clearance forpedal shaft. As found on some commercial vehicles.
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks
Rear Window Weatherstrip
1940-48 Sedan Delivery Style 1271 only.Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Door Bumpers
This is a rubber door jamb post bumper for 1932-1936 Chevrolet & GMC trucks (exc. 1936 Low Roof Cab). Two screw type with metal reinforcing inserts. Dimensions: 1-3/4" Wide x 1-1/4" High x 5/8" Thick. Replaces GM# 368954
For 1932 1933 1934 1935 1936 Chevrolet Trucks
Vent Post Seal
1958 Station wagons and Sedan DeliveryVent window division bar seals are the verticle sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 Chevrolet Cars
1955-66 2nd Series
and rivet holes as original. All Trucks
- a nice reproduction.
For 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
Convertible Top Seals
1958 Sport sedan 4-door hardtop
For 1958 Chevrolet Cars
Window Channels
1946-56 Filler channel. Rubber with lip. Special extrusion made for tailgate
section above. Replaces #4162630 and #4661955.
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Cars
Door Weatherstrip
1959-60 Impala, Bel Air Sport Sedan, 1539, 1639, 1739, 1839Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1959 1960 Chevrolet Cars
Lock Pillar Seals
1959-60 On rear door lock pillar. Sport SedansThey have metal core (if original) and are constructed of highly weather-resistant rubber. Nearly every convertible & hardtop from the mid 50s uses them to seal out dust and water from door panels.
For 1959 1960 Chevrolet Cars
Door Weatherstrip
1959-60 Impala, Bel Air Sport Sedan, 1539, 1639, 1739, 1839 rear door.Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1959 1960 Chevrolet Cars
1953-54 All post models (front or rear)Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1953 1954 Chevrolet Cars
Vent Post Seal
1937-38 All models except convertibleVent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1937 1938 Chevrolet Cars
Convertible Top Seals
1962-64 Chevrolet Impala Sport Coupe. With molded ends. Replaces #4871258 & 4871259.
For 1963 1964 Chevrolet Cars
Door Weatherstrip
1963-64 Impala hardtop & convertible
This kit is sold as a complete set for two doors.
For 1963 1964 Chevrolet Cars
Hood Corner Pads
1935-36 Pad, hood, rear corner. Replaces #378078.
models including Sedan Delivery.
1936: Requires four (4) per car.
For 1935 1936 Chevrolet Cars
Door Bumpers
1928-31 Wedge pad, door aligning dovetail. Goes under bumper retainer. Dimensionsas shown. Some models as required.
For 1928 1929 1930 1931 Chevrolet Cars
Lock Pillar Seals
1958-60 Quarter window at upper lock pillar with metal core. ImpalaThey have metal core (if original) and are constructed of highly weather-resistant rubber. Nearly every convertible & hardtop from the mid 50s uses them to seal out dust and water from door panels.
For 1958 1959 1960 Chevrolet Cars
Door Bumpers
1935 Pad, door jamb front edge. Upper with
Master series closed models only.
For 1935 Chevrolet Cars
Hinge Mounting Parts
1933-34 Pads, trunk hinge. Six (6) piece set. Sold in complete setsonly. Replaces #4041217-18-19 for Town Sedan only.
For 1933 1934 Chevrolet Cars
Axle Bumpers
1939-40 Bumper, front axle.
to 3 weeks. Re-vulcanizing service of #350251 for JBand KB Master 85 without knee action.
For 1939 1940 Chevrolet Cars
Door Weatherstrip
1953-54 Hardtop and convertible
This kit is sold as a complete set for two doors.
For 1953 1954 Chevrolet Cars
Rear Window Weatherstrip
1961-62 Full-size sport sedansReady to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1961 1962 Chevrolet Cars
Back Window Seals
1947-55 1st Series
channel. For upper end gate -SUBURBAN ONLY.
For 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Convertible Top Seals
1961-64 Full-size With metal core and studs. Perfect, correct detail.
For 1961 1962 1963 1964 Chevrolet Cars
Quarter Window Weatherstrip
1953 Styles 1211, 27, 27B, 69 no reveal.Side and quarter window leading edge weather-strip. They have a metal core (if required) and are designed to fit and look great. Excellent quality reproductions made in the USA.
For 1962 1963 1964 1965 Chevrolet Cars
Rear Window Weatherstrip
This Rear Window Seal fits 1953 Chevrolet 150 Models without reveal molding. Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1953 Chevrolet Cars
Spring Seals
1940-1954 Seat, rear spring. REBUILDING SERVICE ONLY. Send in complete casting with metalsleeve bushing. We must Please allow 3-4 weeks for service. Replaces GM #3652182, 3652183. For all 1940-1954 passenger models & 1948-1954 1/2 Ton Trucks.
For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks
Rear Window Weatherstrip
Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1960 1961 1962 1963 1964 Chevrolet Cars
Vent Post Seal
1933 Master 5 window coupes and 4-door sedans. Styles 33-559, 567.Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1933 Chevrolet Cars
Windshield Post Weatherstrip
1952 Windshield pillar post. Replaces #4610963-4. Molded left and right for BelAir hardtop only.
For 1952 Chevrolet Cars
Spring Bumpers
1957-59 Bumper, rear spring. Correct molded replacement of #3743096. Used on Chevy and GMC 1/2 ton trucks.
For 1957 1958 1959 Chevrolet Trucks
Quarter Window Weatherstrip
1962-64 Impala Sport Coupe only.
They have a metal core (if required) and are designed to fit and look great. Excellent quality reproductions made in the USA.
For 1962 1963 1964 Chevrolet Cars
Rear Window Weatherstrip
1961 All full-size sport coupes,Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1961 Chevrolet Cars
Vent Post Seal
1958 Impala, 1959-60 All hardtop and convertibles.Vent window division bar seals are the vertical sealing surface that is attached to the division post. Except for C-40 - which is a universal rubber-only substitute - these seals have a metal core with attaching tabs just like the originals.
For 1958 1959 1960 Chevrolet Cars
Rear Window Weatherstrip
1961-64 Bel Air, Impala Sport Sedan, 1539, 1639, 1739, 1839Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steele Rubber Products inc. The channels are of the highest quality - authenticity - and made in the USA.
For 1935 Chevrolet Cars
Door Weatherstrip
Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1958 Chevrolet Cars
Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1958 Chevrolet Cars
Quarter Window Weatherstrip
1961-64 Full-size convertibles.Side and quarter window leading edge weather-strip. They have a metal core (if required) and are designed to fit and look great. Excellent quality reproductions made in the USA.
For 1961 1962 1963 1964 Chevrolet Cars
Convertible Top Seals
1961-62 With molded ends. All full-size hardtop sedansWith molded ends. All full-size hardtop sedans
For 1961 1962 Chevrolet Cars
Window Seals
1955-60 Seal, front window regulator w/electric
1957-62 Corvette
For 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars
Door Weatherstrip
1960-70 Panel Truck
Replaces #3807777. Four piece set. Some vehicles require two sets. Overall Length: 3-3/8" long.
For 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 Chevrolet Trucks
Vent Post Seal
1951-55 1st. series Seal, vent window post Metal core and rivet holes . Made as the original.
For 1951 1952 1953 1954 1955 Chevrolet Trucks
Door Weatherstrip
1951-52 Weather-strip, auxiliary on body lock pillar. Correct extrusioncut 30 long. For all hardtops and convertibles.
For 1951 1952 Chevrolet Cars
Axle Bumpers
1958-63 Bumper, rear axle. Made with metal core and
ALL full size models.
For 1958 1959 1960 1961 1962 1963 Chevrolet Cars
Quarter Window Bumper
1949-52 Bumper, quarter window on body lock pillar. Hardtop and convertible models.
For 1949 1950 1951 1952 Chevrolet Cars
Hood Anti Squeak
1958 Anti-squeak, hood to radiator. All passenger cars with factory air.
For 1958 Chevrolet Cars
Clutch Brake Pedal Pad
Fully detailed with ribs extending down over sides of pad. 1937-40: Replacement - see also 60-125. Made in the USA! Dimensions: 3-1/2" x 1-7/8" Overall. Replaces GM# 3657980 1941-52: All passenger - Original design 1953-54: See 60-300 1955-57: All passenger (except power brake) Original design
For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars
Vent Post Seal
This is a pair of vertical Vent Window Post Seals for 1934-1935 Chevrolet Passenger Cars, including Sedan Delivery (exc Convertible). Vent window division bar seals are the vertical sealing surface that is attached to the division post. These seals have a metal core with attaching tabs just like the originals.
Specific Applications:
1935 Standard Passenger Models
For 1934 1935 Chevrolet Cars
Window Channels
This is Door Window Sash Filler Channel for 1950-1952 Chevrolet, Pontiac & Oldsmobile Convertible & Hardtop models. This filler is used to hold the window glass to the channel and also provide a weather seal for the window mechanism. Sold in a pair for both sides. Length of flap is 1-3/4"
For 1950 1951 1952 Chevrolet Cars
Mounting Pads
1958 Pass tail light mtg. seals (exc. Impala, wagon & SDL)
For 1958 Chevrolet Cars
1958 Pass. tail light mounting seals (Impala only) 6 pcs.
For 1958 Chevrolet Cars
1958 Pass. tail light mounting seals (wagon & SDL only)
For 1958 Chevrolet Cars
Hood Bumpers
1962 car hood bumper, hood to fender ledge. 4 per car. Forall full size Chevrolets. Sold in sets of 4 bumpers.
For 1962 Chevrolet Cars
Mounting Pads
1961 Passenger tail light mounting seals (4 pieces)
For 1961 Chevrolet Cars
Convertible Top Bumpers
1950-52 Pad, convertible top rest. Full molded with metal core.Replaces #4579174-5. Used on convertibles.
For 1950 1951 1952 Chevrolet Cars
Mounting Pads
Rear Window Weatherstrip
Ready to install vulcanized rear window glass channels that are manufactured for Chevrolet automobiles by Steel Rubber Products Inc. These channels are of the highest quality - authenticity - and made in the USA.
For 1961 Chevrolet Cars
Back Window Seals
Vulcanized rear window seal. SUBURBAN with lift gate.
For 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks
Window Bumpers
Snap-over type - 3/4" diameter x 5/16" thick. Six per car. Convertibles only. Set of 4 per vehicle.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Mounting Pads
1941-48 Mounting
lights, elliptic, sharp
x 2-7/8. Some, as required.
For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars
Door Weatherstrip
Kits are complete materials to do most doors. Individual pieces of the kits are available. This kit is sold as a complete set for two doors.
For 1958 Chevrolet Cars
Molding Washer
Rubber washer for attaching moldings, emblems, and fender guards as required on body, Die cut rubber replacement for #4563822. Used on all models.
For 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Rubber washer for attaching molding. Use with original metal cup - ¾ OD
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars
Back Hatch Window Seal
Blazer rear hatch window seal
For 1969 1970 1971 1972 Chevrolet Trucks
1290 Items Found
Showing 301 thru 400
Showing 301 thru 400