The 1955-1957 cargo floor extension fits Chevrolet Nomad and wagon models only. The cargo floor extensions go directly on both sides of the spare tire well. Two floor extensions are required if you are needing to replace both sides.
This kit replaces the structure that holds up the front part of the load floor over the rear floor pan area just behind the drivers seat and includes all brackets and risers. Made in the USA.
1955-1957 Chevrolet Station Wagon Full Cargo Floor. 48" x 35" This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a Lower RIGHT Inner Cowl Repair Kit for 1937-1939 Chevrolet Passenger cars. This is the inner structure to the outer lower front cowl. Specify Left or Right when ordering. Made in the USA!
This is a Lower LEFT Inner Cowl Repair Kit for 1937-1939 Chevrolet Passenger cars. This is the inner structure to the outer lower front cowl. Specify Left or Right when ordering. Made in the USA!
This is a lower cowl sheet metal repair panel for 1931-1932 Chevrolet passenger cars. Dimensions: 6' Tall x 14" Long, Bead Height is 1-1/4". Sold in a pair for left and right sides.
This left hand brace fits all of the 1955 car models, but only the 1956-57 convertible. This brace connects the inner dash kick panel area down to the front corners of the front floor pans.
This right hand brace fits all of the 1955 car models, but only the 1956-57 convertible. This brace connects the inner dash kick panel area down to the front corners of the front floor pans.
This is a Lower Cowl Repair Panel for 1941 Chevrolet Passenger Cars. Panel is 21 inches tall. Specify Right or Left when ordering. This high quality panel is Made in the USA by Engineering & Mfg. Services.
This is a Lower Cowl Repair Panel for 1941 Chevrolet Passenger Cars. Panel is 21 inches tall. Specify Right or Left when ordering. This high quality panel is Made in the USA by Engineering & Mfg. Services.
These steel repair panels replace the door bottoms of 1931-1932 Chevrolet Coupes, except 3WD Coupe. Length is 28-1/2" - compare to your originals. Sold as a pair, left and right.
These steel repair panels replace the door bottoms of 1931-1932 Chevrolet 2 Door sedans & 3WD coupe. Length is 35-1/8" Long - Compare to your original. Sold as a pair, left and right.
This is a 1955-1957 Chevrolet passenger car inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad. Specify Right or Left when ordering.
This is a 1955-1957 Chevrolet passenger car inner door bottom. It fits the 2 door hardtop and convertible. It can be modified to fit the 2 door sedan, wagon and Nomad. Specify Right or Left when ordering.
This is the "A" pillar reinforcement for the 1955-1957 Chevrolet hardtop and convertible models. This reinforcement adds support to the door hinge pillar. It is welded to the lower inner cowl area below the door hinge. Specify Right or Left when ordering.
This is the "A" pillar reinforcement for the 1955-1957 Chevrolet hardtop and convertible models. This reinforcement adds support to the door hinge pillar. It is welded to the lower inner cowl area below the door hinge. Specify Right or Left when ordering.
This is a 1957 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1957 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
This is a 1955-1956 Chevrolet passenger car partial "A" pillar. It replaces the lower front door area at the front of the rocker panel. The weld joint extends above the top of the lower door hinge window. Specify Right or Left when ordering.
These 1955-1957 inside door handle reinforcements can be welded to the inside of the door skin for more support to the exterior door handles. They fit all models. Sold as a pair.
Bring your rusted door back to life with a patch. If your door needs more then a skin, check out our full door shells. Get your car back to new again in no time.
Bring your rusted door back to life with a patch. If your door needs more then a skin, check out our full door shells. Get your car back to new again in no time.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It does not have the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It does not have the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It includes the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a Complete OEM factory style door skin for 1955 & 1957 Chevrolet 2 door hardtop and convertible. It includes the top flange. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a full OEM door skin for 1961-1962 Chevrolet 2 Door Hardtop and Convertible. It is an outer door skin only. Specify Right or Left when ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a full OEM door skin for 1961-1962 Chevrolet 2 Door Hardtop and Convertible. It is an outer door skin only. Specify Right or Left when ordering. This item is oversize and special freight charges will apply. Call or email us for a freight quote.
This is a 1955-57 Chevrolet OEM factory style door skin for 2 door sedan. It has the top flange, however, the window frame is not included. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a 1955-57 Chevrolet OEM factory style door skin for 2 door sedan. It has the top flange, however, the window frame is not included. Specify Right or Left when ordering. This is an oversize item and special freight charges will apply. Call for a freight quote.
This is a 1955-1957 "B" pillar bracket for the convertible models. This bracket joins the "B" pillar to the "B" pillar brace. Specify right or left when ordering.
This is a 1955-1957 "B" pillar bracket for the convertible models. This bracket joins the "B" pillar to the "B" pillar brace. Specify right or left when ordering.