Filters
Vehicle:
Truck - Switch To
Car
/
All
Narrow results by department:
CHEVROLET 1929-1934 5/16" STARTER DRIVE LOCK WASHER
1929-1934 Starter Drive Lock Tab Washer. Dimensions: 5/16" ID x 5/8" OD. Fits Chevrolet cars & trucks. Replaces GM# 806427 Specific Applications: 1929-1933 All cars & trucks; 1934 Standard Passenger (Models DC) only
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
Spring Bolts
CHEVROLET 1925-1935 SPRING BOLT SLOTTED NUT
This is a slotted (castle) NUT for the FRONT & REAR spring bolt for 1925-1934 Chevrolet cars & trucks. Dimensions: 9/16"-18 X 7/8" Hex X .61" Tall. Use with FS-671 Bolt & FS-672 Bushing. 1925-1929 vehicles - 12 nuts required per vehicle. 1929-1935 vehicles - up to 4 nuts required per vehicle. Replaces GM# 119255 Specific Applications: 1925-1935 Passenger & Truck (exc. 1934-1935 Master) - FRONT; 1925-1935 Passenger & 1/2 Ton Truck (exc. 1934-1935 Master) - REAR
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 Chevrolet Cars and Trucks
CHEVROLET 1967-69 4X4 FRONT SPRING BOLT & NUT
1967-87 4X4 FRONT (K10, K20 & K30); Dimensions: 1/2"-20 x 4" long.
For 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevrolet Trucks
CHEVROLET 1941-1968 TRUCK SPRING PIN LOCK
This is a REAR Spring Pin Lock for 1941-1968 Chevrolet & GMC Trucks. Dimensions: 5/16 x 24, 7/16" thick, 2" OL. Replaces GM# 3656671 Specific Applications: 1941-1955 (1st Series) 3/4 & 1 Ton Trucks; 1955-1959 (2nd Series) 1/2, 3/4 & 1 Ton Trucks - Series 3 Commercial; 1960-1966 4WD; 1960-1968 Series 20-30 (D-D); 1967-1968 Series 30 (exc. D-D)
For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 Chevrolet Trucks
CHEVROLET 1925-1934 FRONT & REAR SPRING & SHACKLE BOLT
This spring bolt fits 1925-1934 Chevrolet cars & trucks. Bolt is 9/16"-18 x 3-3/16". Note: 1925-1929 models require 12 each; 1930-1933 require 4 each; 1934 Standard requires 2 each. Replaces GM # 344336 Specific Applications: 1925-1933 All Passenger & Truck FRONT; 1934 Standard Passenger FRONT: 1925-1933 Passenger & 1/2 Ton REAR
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
CHEVROLET 1934-1936 F & R SPRING BOLT & BUSHING
This is a FRONT Spring Bolt & Bushing Kit for one spring. It fits 1934-1936 Chevrolet & GMC cars & trucks. Kit comes with one spring bolt, bushing, lock washer and nut. Bolt Dimensions: 11/16"-16 x 3-1/2". Bushing Dimensions: OD .879" x ID .694" x 1-3/4" Long. Replaces GM# 373200, 379648 Specific Applications: 1934-1936 Chevy & GMC Trucks - All Commercial & Utility - Models DB, P, EB, Q, FD, R - FRONT; 1934-1936 Chevy & GMC 1/2 Ton Trucks - Models DB, EB, FB - REAR: 1935-1936 Master Passenger with Straight Axle - Models ED, FD
For 1934 1935 1936 Chevrolet Cars and Trucks
CHEVROLET 1941-1959 TRUCK FRONT SPRING BOLT & BUSHING
This is a FRONT Spring, Rear Eye Bolt & Bushing for 1941-1959 Chevrolet & GMC Trucks. Bolt Dimensions: 11/16"-16 x 3-15/16". Replaces GM# 3657393. 593992, 3713064 Specific Applications: 1939-1955 COE - Front Spring, Front Hanger; 1941-1955 (1st Series) D-D Trucks - Front Spring, Front Hanger; 1941-1955 (1st Series) 1 Ton & Utility - Front Spring, Rear Hanger; 1955-1959 (2nd Series) 1/2, 3/4, & 1 Ton Trucks; 1960-1964 D-D Trucks (exc. 102 W.B.)
For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 Chevrolet Trucks
CHEVROLET 1934-1955 TRUCK SPRING BOLT & BUSHING KIT
This is a spring bolt & bushing for all 1934-1955 (1st Series) Chevrolet & GMC trucks. In 1955, used on 1st Series Only. Bolt Dimensions: 11/16-16 x 3-3/8" for 1-3/4" wide spring. Bushing dimensions: 1.69" OL; .875" OD; .658" ID. Replaces GM#'s 373200 & 593990 Specific Applications: 1934-1940 All Trucks (exc. COE); 1941-1955 (1st Series) 1/2 & 3/4 Ton FRONT, 1941-1955 (1st Series) 1/2 Ton REAR
For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
Spring U-Bolts
CHEVROLET 1929-1955 CAR/TRUCK SPRING U-BOLT 3.75 INCHES
This is a Front & Rear Spring U-BoltCompare to your original and SA-112 (4-3/4") Fits 1929-39 Passenger - FRONT; 1929-55 (1st Series) 1/2 Ton - FRONT (In 1955, used on 1st Series only) 1938-54 Passenger - REAR; 1947-54 1/2 Ton - REAR;
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
CHEVROLET 1931-46 CAR/PU REAR SPRING U-BOLT
Fits: 1931-38 Passenger (exc 1933-36 standard) - REAR; 1933-36 Sedan Delivery - REAR; 1931-46 1/2 ton trucks - REAR. Dimensions: 1/2 x 1-7/8 x 6-7/8 with Round top.
For 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks
CHEVROLET 1929-1959 SPRING U-BOLT 1/2" X 1-7/8" X 4-3/4"
This is a Leaf Spring U-Bolt for 1929-1955 Chevrolet & GMC cars & trucks. Dimensions: 1/2" Diameter x 1-7/8" Inside Width x 4-3/4" High - Square Top. Compare to your original and SA-112D (3-3/4" High) Specific Applications: 1929-1939 Passenger - FRONT; 1929-1955 (1st Series) 1/2 Ton - FRONT; 1938-1954 Passenger - REAR; 1947-1954 1/2 Ton - REAR
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars and Trucks
CHEVROLET 1955-1959 TRUCK SPRING U-BOLT - FRONT
This is a FRONT Spring U-Bolt for 1955-1959 (2nd Series) Chevrolet & GMC 1/2 Ton trucks. Dimensions: 1/2 dia. x 2-1/16 wide x 4-3/4 square top. Four required per truck.
For 1955 1956 1957 1958 1959 Chevrolet Trucks
CHEVROLET 1933-55 TRUCK FRONT SPRING U-BOLT
In 1955, used on 1st Series only. Fits: 1933-40 Utility truck (exc. COE); 1946-55 (1st Series) 3/4 Ton Truck (exc. D-D). Replaces GM# 3691620. Compare to original.
For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks
CHEVROLET 1946-59 3/4 TON REAR SPRING U-BOLT
This is a REAR Spring U-Bolt for 1946-1959 3/4 Ton Chevrolet & GMC Trucks. Dimensions: 5/8" Diameter x 2-1/16" Wide x 8-1/2" High - Compare to your original. Each bolt comes with high nuts and flat washers. Made in the USA! Replaces GM# 3681686, 3714891
For 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 Chevrolet Trucks
Starter Hardware
CHEVROLET 1934-1937 BENDIX DRIVE SPRING SCREW - POINT ON TIP
1934-1937 All Chevrolet car & trucks (exc 1934 Standard DC) Starer Bendix Drive Spring Retainer Screw - with Point on Tip. 1 Required per starter. Dimensions: 3/8"-24 X 13/16" long. Replaces GM# 1848180
For 1934 1935 1936 1937 Chevrolet Cars and Trucks
CHEVROLET 1929-1937 STARTER DRIVE END BUSHING
This starter bushing is used on the drive end of all 1929-1937 Chevrolet cars & trucks. Bushing dimensions: 9/16" ID x 5/8" OD x 3/4" long. One required per starter. Replaces GM# 810620.
For 1929 1930 1931 1932 1933 1934 1935 1936 1937 Chevrolet Cars and Trucks
CHEVROLET 1929-1934 BENDIX DRIVE SPRING SCREW - NO POINT ON TIP
1929-1934 All Chevrolet car & trucks (exc. 1934 Master) Starter Bendix Drive Spring Retainer Screw - No Point on Tip. Dimensions: 5/16"-24 x 5/8" long. One required per starter. Replaces GM# 806426 Specific Applications: 1929-1933 All car & truck; 1934 Standard (Models DC only)
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
CHEVROLET 1929-1934 BENDIX DRIVE SPRING SCREW - POINT ON TIP
1929-1934 All Chevrolet car & trucks (exc. 1934 Master) Starter Bendix Drive Spring Retainer Screw - With Point on Tip. Dimensions: 5/16"-24 x 13/16" long. One required per starter. Replaces GM# 808953 Specific Applications: 1929-1933 All car & truck; 1934 Standard (Models DC only)
For 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 Chevrolet Cars and Trucks
Filters
Vehicle:
Truck - Switch To
Car
/
All
Narrow results by department:
